Description: Im Forschungsreaktor Muenchen II (FRM-II) kommt ein neu entwickelter Kompaktkern zum Einsatz, der aus zwei konzentrischen Rohren besteht, zwischen denen 113 Kuehlkanaele durch rotationssymmetrisch angeordnete Brennstoffplatten gebildet werden. Die nach einer Abschaltung des FRM-II anfallende Nachzerfallswaerme wird fuer mindestens drei Stunden ueber Nachkuehlpumpen abgefuehrt. Nach dem Auslaufen der Nachkuehlpumpen wird die restliche Nachzerfallswaerme ueber eine Naturkonvektionsstroemung an das Wasser im Reaktorbecken abgegeben. Am Lehrstuhl fuer Nukleare und neue Energiesystem der Ruhr-Universitaet Bochum wurde eine Versuchsanlage zur Untersuchung des Konzepts der Nachzerfallswaermeabfuhr im FRM-II errichtet. Mit Hilfe einer elektrisch beheizten Teststrecke werden die zeitlichen Verlaeufe der Wand- und Wassertemperaturen sowie die, infolge von Siedevorgaengen, auftretenden Druckpulsationen innerhalb eines Kuehlkanals untersucht. Die bisherigen Messergebnisse haben die Kuehlbarkeit des Brennelements durch eine Naturkonvektionsstroemung sowohl bei Normalbetrieb als auch bei komplettem Ausfall des aktiven Nachkuehlsystems nachgewiesen.
Types:
SupportProgram
Origins:
/Bund/UBA/UFORDAT
Tags:
Bochum
?
München
?
Brennelement
?
Kühlmittel
?
Wassertemperatur
?
Forschungsreaktor
?
Reaktorsicherheit
?
Energiesystem
?
Pumpe
?
Reaktor
?
Simulation
?
Störfall
?
Forschungseinrichtung
?
Kühlung
?
Versuchsanlage
?
Risikomanagement
?
FRM-II
?
Forschungsreaktor-Muenchen-II
?
Kompaktkern
?
Nachkuehlpumpe
?
Nachzerfallswaermeabfuhr
?
Naturkonvektion
?
Siedevorgaenge
?
Wärmefluss
?
Zwangskonvektion
?
boiling processes
?
decay heat removal
?
natural convection
?
Region:
Nordrhein-Westfalen
Bounding boxes:
6.76339° .. 6.76339° x 51.21895° .. 51.21895°
License: cc-by-nc-nd/4.0
Language: Deutsch
Organisations
Time ranges:
1996-04-01 - 1998-08-31
Alternatives
-
Language: Englisch/English
Title: Investigation of the Transition from Forced to Natural Convection in the Fuel Element of the Research Reactor Munich II
Description: The research reactor Munich II (FRM-II) makes use of a new developed compact core, which consists of two concentric pipes, between which 113 cooling channels are formed by rotationally symmetric placed fuel plates. After a shut down of the FRM-II the produced decay heat is removed by decay heat removal pumps, which run for at least three hours. After the coast down of the decay heat removal pumps, the remaining part of the decay heat is given off to the water in the reactor pool by means of a natural convection flow. In order to investigate the concept of the decay heat removal in the FRM-II a test facility was built at the Department for Nuclear and New Engergy Systems of the Ruhr-University Bochum. By means of an electrically heated test section the time history of the wall and the water temperatures are investigated as well as the pressure pulsations, which occur as a result of boiling processes inside a cooling channel. Results so far have proved the feasibility to cool the fuel element by natural convection both at normal operation and in case of a complete loss of the active decay heat removal system.
https://ufordat.uba.de/UFORDAT/pages/PublicRedirect.aspx?TYP=PR&DSNR=50193
Status
Quality score
- Overall: 0.46
-
Findability: 0.52
- Title: 0.36
- Description: 0.17
- Identifier: false
- Keywords: 0.57
- Spatial: RegionIdentified (1.00)
- Temporal: true
-
Accessibility: 0.67
- Landing page: Specific (1.00)
- Direct access: false
- Publicly accessible: true
-
Interoperability: 0.00
- Open file format: false
- Media type: false
- Machine-readable metadata: false
- Machine-readable data: false
-
Reusability: 0.67
- License: ClearlySpecifiedAndFree (1.00)
- Contact info: false
- Publisher info: true
Accessed 1 times.