Laser scanning point clouds of forest stands were acquired in southwest Germany in 2019 and 2020 from different platforms: an aircraft, an uncrewed aerial vehicle (UAV) and a ground-based tripod. The UAV-borne and airborne laser scanning campaigns cover twelve forest plots of approximately 1 ha. The plots are located in mixed central European forests close to Bretten and Karlsruhe, in the federal state of Baden-Württemberg, Germany. Terrestrial laser scanning was performed in selected locations within the twelve forest plots. Airborne and terrestrial laser scanning point clouds were acquired under leaf-on conditions, UAV-borne laser scans were acquired both under leaf-on and later under leaf-off conditions. In addition to the laser scanning campaigns, forest inventory tree properties (species, height, diameter at breast height, crown base height, crown diameter) were measured in-situ during summer 2019 in six of the twelve 1-ha plots. Single tree point clouds were extracted from the different laser scanning datasets and matched to the field measurements. For each tree entry, point clouds, tree species, position, and field-measured and point cloud-derived tree metrics are provided. For 249 trees, point clouds from all three platforms are available. The tree models form the basis of a single tree database covering a range of species typical for central European forests which is currently being established in the framework of the SYSSIFOSS project.
Laser scanning point clouds of forest stands were acquired in southwest Germany in 2019 and 2020 from different platforms: an aircraft, an uncrewed aerial vehicle (UAV) and a ground-based tripod. The UAV-borne and airborne laser scanning campaigns cover twelve forest plots of approximately 1 ha. The plots are located in mixed central European forests close to Bretten and Karlsruhe, in the federal state of Baden-Württemberg, Germany. Terrestrial laser scanning was performed in selected locations within the twelve forest plots. Airborne and terrestrial laser scanning point clouds were acquired under leaf-on conditions, UAV-borne laser scans were acquired both under leaf-on and later under leaf-off conditions. In addition to the laser scanning campaigns, forest inventory tree properties (species, height, diameter at breast height, crown base height, crown diameter) were measured in-situ during summer 2019 in six of the twelve 1-ha plots. Single tree point clouds were extracted from the different laser scanning datasets and matched to the field measurements. For each tree entry, point clouds, tree species, position, and field-measured and point cloud-derived tree metrics are provided. For 249 trees, point clouds from all three platforms are available. The tree models form the basis of a single tree database covering a range of species typical for central European forests which is currently being established in the framework of the SYSSIFOSS project.
The DFG Priority Program 1803 “EarthShape” (www.earthshape.net) investigates Earth surface shaping by biota. As part of this project, we present Light Detection and Ranging (LiDAR) data of land surface areas for the four core research sites of the project. The research sites are located along a latitudinal gradient between ~26 °S and ~38 °S in the Chilean Coastal Cordillera. From north to south, the names of these sites are: National Park Pan de Azúcar; Private Reserve Santa Gracia; National Park La Campana; and National Park Nahuelbuta.
The three datasets contain raw 3D point cloud data captured from an airborne LiDAR system, and the following derivative products: a) digital terrain models (DTM, sometimes also referred to as DEM [digital elevation model]) which are (2.5D) raster datasets created by rendering only the LiDAR returns which are assumed to be ground/bare-earth returns and b) digital surface models (DSM) which are also 2.5D raster datasets produced by rendering all the returns from the top of the Earth’s surface, including all objects and structures (e.g. buildings and vegetation).
The LiDAR data were acquired in 2008 (southernmost Nahuelbuta [NAB] catchment), 2016 (central La Campana [LC] catchment) and 2020 (central Santa Gracia [SGA] catchment). Except for Nahuelbuta (data already was available from the data provider from a previous project), the flights were carried out as part of the "EarthShape" project. The LiDAR raw data (point cloud/ *.las files) were compressed, merged (as *.laz files) and projected using UTM 19 S (UTM 18 S for the southernmost Nahuelbuta catchment, respectively) and WGS84 as coordinate reference system.
A complementary fourth dataset for the northernmost site in the National Park Pan de Azúcar, derived from Uncrewed Aerial Vehicle (UAV) flights and Structure from Motion (SfM) photogrammetry, is expected to be obtained during the first half of 2022 and will be added to the above data set.
The near-continuous time series of point clouds was acquired in the snow-covered area of the Schneeferner at the Zugspitze mountain in Germany using hourly terrestrial laser scanning (TLS) over a period of five days in April 2018. The dataset comprises around 130 epochs of 10 to 25 million points per scan with centimeter-scale accuracy and point spacing. The 4D geospatial dataset of the experimental near-continuous laser scanning setup can be used for analysis of snow cover dynamics and in general method development for change analysis of natural scenes using laser scanning time series.