API src

Found 21 results.

Other language confidence: 0.9340447145088717

Land seismic data of the ALPHA amphibious controlled source experiment - Datasets

Raw-, SEG-Y and other supplementary data of the landside deployment from the amphibious wide-angle seismic experiment ALPHA are presented. The aim of this project was to reveal the crustal and lithospheric structure of the subducting Adriatic plate and the external accretionary wedge in the southern Dinarides. Airgun shots from the RV Meteor were recorded along two profiles across Montenegro and northern Albania.

On-shore data of the amphibious part of the refraction-seismic project INGON in and around Sri Lanka (RV SONNE cruise SO258/2)

In July and August 2017, off-shore seismic measurements have been carried out south of Sri Lanka as part of the INGON project. Main aim of this part of the project was to study the deep structure of the continent-ocean transition south of Sri Lanka and the early plate drift of India and Sri Lanka. The marine profile was extended by 15 seismic stations on-shore Sri Lanka, of which the data is contained in this data publication (land observations of airgun sources). This dataset consists of the raw (continuous) data of the land recorders (in proprietary cube and MSEED formats) and the shot records (airgun sources) in SEGY-format (standard exchange format).

Data of the Western Makran Seismic Transects (Iran)

In September 2017 three crustal-scale seismic profiles were acquired in southern Iran covering the subaerial accretionary wedge of the western part of the Makran Subduction zone. Each of the roughly north-south trending profiles was approximately 200 km long, and on each profile 9 to 10 artificial shots with charges between 400 and 800 kg of explosives were fired. The seismic signals were observed by 300 autonomous digital recorders with geophones on each profile. This dataset consists of the raw (continuous) data of the recorders (in proprietary cube format and MSEED-format) and the shot records in SEGY-format (standard exchange formats).

Geophysical Imaging of Deep EarthShape (GIDES): Seismic data of the Private Reserve Santa Gracia, Chile

The dataset contains the seismic weight drop data acquired in Private Reserve Santa Gracia, Chile. The data acquisition was conducted as a part of the EarthShape project in the subproject of Geophysical Imaging of the Deep EarthShape (GIDES). The seismic line was setup to cut across an existing borehole location with core and geophysical logging data available (Krone et al., 2021; Weckmann et al., 2020). The data was acquired to image the deep weathering zone identified by the borehole data across the seismic profile. Included in the datasets are the raw data of the CUBE data logger, SEG-Y data of the recorded shots, and the shot and receiver geometry data. A vital aspect of comprehending the interplay between geological and biological processes lies in the imaging of the critical zone, located deep beneath the surface, where the transition from unaltered bedrock to fragmented regolith occurs. It had been hypothesized that the depth of such weathering zone is dependent on the climate condition of the area. A more humid climate with higher precipitation will result in a deeper weathering front. As a part of the EarthShape project (SPP-1803 ‘EarthShape: Earth Surface Shaping by Biota’), specifically the Geophysical Imaging of the Deep EarthShape (GIDES - Grant No. KR 2073/5-1), we aim to image the weathering zone using the geophysical approach. Using the seismic method, we can differentiate different weathered layers based on the seismic velocity while also providing a 2D subsurface image of the critical zone. We conducted a seismic weight drop experiment in the Private Reserve Santa Gracia, Chile, to observe the depth of the weathering zone in a semi-arid climate and compare the resulting model with existing borehole data (Krone et al., 2021; Weckmann et al., 2020). The acquired data can then be used for multiple seismic imaging techniques, including body wave tomography and multichannel analysis of surface waves.

Seismic data of the DESERT Controlled Source Array II (CSA-2; Arava Valley, Jordan, Oct./Nov. 2001) - Datasets

SEG-Y data of small-scale high-resolution controlled-source seismic experiment to investigate the mesoscopic fault structure of the Wadi Arava fault, Dead Sea Transform. The Dead Sea Transform (DST) is a major shear zone running for more than 1000km from the Red Sea in the South to the Zagros mountain chain in the North. It accommodates the lateral movement of the Sinai microplate and the Arabian shield; the total displacement along this shear zone is >100km. As part of the DESERT 2000 research project, several geophysical studies on a wide range of scales aimed to reveal the structure and evolution of the DST (Weber et al., 2009, 2010, and references therein). In October/November 2010 we conducted a high-resolution seismic experiment in the central part of the Arava/Araba segment of the shear zone. The analysis of the data (reflection seismics, tomography) revealed the shallow structure of the Wadi Arava fault (main strand of the DST) down to a depth of ~1km. The main findings are published in Maercklin (2004) and Haberland et al. (2007).

Seismic data from the 2016-02-22 flood event and from an active seismic survey conducted around the Eshtemoa River, Israel

Bedload transport is a key process in fluvial morphodynamics and hydraulic engineering, but is notoriously difficult to measure. The recent advent of stream-side seismic monitoring techniques provides an alternative to in-stream monitoring techniques, which are often costly, staff-intensive, and cannot be deployed during large floods. Seismic monitoring is a surrogate method requiring several steps to convert seismic data into bedload data. State-of-the-art approaches of conversion exploit physical models predicting the seismic signal generated by bedload transport. Here, we did an active seismic survey (2017-11) and used seismic data from a flood event (2016-02-22) on the Nahal Ehstemoa to constrain a seismic bedload model. We conducted the active seismic survey to determine the local seismic ground properties, i.e., the Green’s function. We also used water depth and bedload grain size distribution to constrain the seismic bedload model and were able to compare the bedload flux obtained from the seismic data using the model with high-quality independent bedload measurements from slot samplers on the site. The complementary non-seismic data is published in a separate data publication (Lagarde et al., 2020).

Seismic pilot survey in the Mont Terri Underground Rock Laboratory (URL)

This data publication contains a seismic survey which was acquired in the Mont Terri Underground Rock Laboratory (URL) in January 2019. The aim of the SI-A experiment (Seismic Imaging Ahead of and around underground infrastructure) is to provide a seismic characterization at the meso scale and to investigate the feasibility of tomographic and reflection imaging in argillaceous environments. The survey covered the different facies types of Opalinus Clay: shaly facies, carbonate -rich sandy facies and sandy facies (Bossart et al. 2017). Three different seismic sources (impact, vibro, ELVIS) were used to acquire the seismic data. The impact and magnetostrictive vibro sources were particularly designed for seismic exploration in the underground (Giese et al. 2005, Richter et al. 2018). The ELVIS source was mainly designed for near-surface investigations on roads or in open terrain (Krawczyk et al. 2012). All data were recorded on 32 3-component geophones (GS-14-L3, 28 Hz) which were deployed in 2 m deep boreholes, fixed at the tip of rock anchors. The data publication covers raw and preprocessed data stored in SEG-Y format.

Geophysical Imaging of Deep EarthShape (GIDES): Controlled source seismic data of Santa Gracia, Chile

The dataset contains the seismic weight drop data acquired in Private Reserve Santa Gracia, Chile. The data acquisition was conducted as a part of the EarthShape project in the subproject of Geophysical Imaging of the Deep EarthShape (GIDES). The seismic line was setup to cut across an existing borehole location with core and geophysical logging data available (Krone et al., 2021; Weckmann et al., 2020). The data was acquired to image the deep weathering zone identified by the borehole data across the seismic profile. Included in the datasets are the raw data of the CUBE data logger, SEG-Y data of the recorded shots, and the shot and receiver geometry data. A vital aspect of comprehending the interplay between geological and biological processes lies in the imaging of the critical zone, located deep beneath the surface, where the transition from unaltered bedrock to fragmented regolith occurs. It had been hypothesized that the depth of such weathering zone is dependent on the climate condition of the area. A more humid climate with higher precipitation will result in a deeper weathering front. As a part of the EarthShape project (SPP-1803 ‘EarthShape: Earth Surface Shaping by Biota’), specifically the Geophysical Imaging of the Deep EarthShape (GIDES - Grant No. KR 2073/5-1), we aim to image the weathering zone using the geophysical approach. Using the seismic method, we can differentiate different weathered layers based on the seismic velocity while also providing a 2D subsurface image of the critical zone. We conducted a seismic weight drop experiment in the Private Reserve Santa Gracia, Chile, to observe the depth of the weathering zone in a semi-arid climate and compare the resulting model with existing borehole data (Krone et al., 2021; Weckmann et al., 2020). The acquired data can then be used for multiple seismic imaging techniques, including body wave tomography and multichannel analysis of surface waves.

Data of the active and passive seismic experiments on Bornholm in the framework of the GASH project (October 2010 and June 2012) - Datasets

SEG-Y and other supplementary data of the near surface active and passive seismic experiments on Bornholm, Denmark, with the aim of investigating the Alum Shale black shale formation. Presented are data of active weight drop measurements, P-wave and S- wave vibroseis experiments and of ambient noise recordings of two locations in the southern part of Bornholm. The corresponding experiments were carried out in October 2010 and in June 2012.

Data from the 1978-79 Rhenish Massif seismic refraction experiment

During 1978-79, a seismic refraction experiment was carried out in the Rhenish Massif, West Germany, and adjacent areas, extending through Belgium and Luxembourg into the Paris Basin in France. The experiment was designed to investigate the structure of the crust and uppermost mantle beneath the massif and thus help in a multidisciplinary study, sponsored by the Deutsche Forschungsgemeinschaft, into the causes and mechanisms of uplift of the massif. The Aachen-Baumholder (L1/L2-M1/M2) profile was completed in May and August, 1978. The 600 km long, main profile and the cross profiles, B-K and K-F, were completed in May 1979. During the main experiment in May 1979, 137 recording units of the MARS type from various European countries participated. 20 shots were fired in 1979 and thus a total of 2740 three-component recordings were made.

1 2 3