umwelt.info: Search results

A database of analogue models and geophysical data investigating caldera resurgence; DynamiCal project

In this dataset we provide data for 6 experimental models of caldera collapse and subsequent resurgence monitored through geophysical sensors (a force or “impact sensor”, Piezotronics PCB 104 200B02 and a Triaxial piezoelectric accelerometer, Model 356B18). The analogue modelling experiments were carried out at the TOOLab (Tectonic Modelling Laboratory), which is a joint laboratory between the Istituto di Geoscienze e Georisorse of the Consiglio Nazionale delle Ricerche, Italy and the Department of Earth Sciences of the University of Florence. The laboratory work that produced these data was partly supported by the European Plate Observing System (EPOS), by the Joint Research Unit (JRU) EPOS Italia and by the “Monitoring Earth's Evolution and Tectonics” (MEET) project (NextGenerationEU). Specifically, this work was performed in the frame of the DynamiCal project, funded by the 2° TNA-NOA call of the ILGE-MEET project.

A database of analogue models documenting fault reactivation during multiphase extension.

In this dataset we provide top-view photos and perspective photos (to create topographic data, i.e. Digital Elevation Models, DEMs) documenting analogue model deformation. For more details on modelling setup, experimental series Wang et al. (2021), to which this dataset is supplementary material. For details on analogue materials refer to Del Ventisette et al., 2019, Maestrelli et al. (2020). The analogue modelling experiments were carried out at the TOOLab (Tectonic Modelling Laboratory) of the Institute of Geosciences and Earth Resources of the National Research Council of Italy, Italy, and the Department of Earth Sciences of the University of Florence. The laboratory work that produced these data was supported by the European Plate Observing System (EPOS) and by the Joint Research Unit (JRU) EPOS Italia. Additional analysis, following the original work, was supported by the “Monitoring Earth’s Evolution and Tectonics” (MEET) project

Experimental data of analogue models addressing the influence of oblique convergence and inheritance on sliver tectonics

This dataset includes video sequences depicting the evolution in map view and lateral view of 7 analogue experiments studying mantle-scale subduction systems. The experiments are performed under a natural gravity field and are designed to understand the role of convergence obliquity on upper plate deformation and partitioning, with a particular emphasis on the role played by lithospheric inherited structures on the development of sliver tectonics. All experiments were performed at the Laboratory of Tectonic modelling of the University of Rennes 1 (France). The experimental set-up corresponds to a lithosphere and sub-lithospheric upper mantle system. The lithospheric plates are simulated with PDMS silicone (Polydimethylsiloxane Silicone) with different viscosities and densities, and the upper mantle with glucose syrup. In particular, for the overriding plate, we simulate the presence of a weaker volcanic arc that can eventually be decoupled from the forearc by a pre-existing discontinuity. The materials are placed into a Plexiglas tank, where the impermeable bottom of the tank represents the 660 km discontinuity. The subduction is initiated by manually forcing the slab into the mantle and it then evolves under the combined effects of internal buoyancy forces (slab pull) and external boundary forces. The subducting plate is pushed toward the trench at a constant velocity of 1.5 cm/min while the overriding plate is maintained fixed during the duration of the experiments. The evolution of the experiments is monitored by DSLR cameras (24 Mpx) taking pictures every 30 seconds at the top and on one side of the experiments. Pictures are then assembled into video-sequences. The scale bar, with black & white rectangles corresponds to 10 cm. The set of experiments consists of one reference model (MODEL-01) with orthogonal convergence, and six models with oblique convergence (Table 1). Among these models, three do not embed a pre-existing lithospheric discontinuity in the overriding plate (MODEL-02, MODEL-03, and MODEL-04) while the three other (MODEL-05, MODEL-06, and MODEL-07) have such a discontinuity. For the models with oblique convergence, we vary the angle between the convergence direction and the trench from 80° (MODEL-02 and MODEL-05) to 60° (MODEL-03 and MODEL-06) and 50° (MODEL-04 and MODEL-07). For details on the experimental set-up, and interpretation of the results, please refer to Suárez et al. (submitted to Tectonophysics) to which these data are supplementary material.

Experimental data of analogue models addressing the influence of crustal strength, tectonic inheritance and stretching/ shortening rates on crustal deformation and basin reactivation

This dataset includes video sequences and strain analysis of 12 analogue models studying crustal-scale deformation and basin reactivation, performed at the Laboratory of Tectonic modelling of the University of Rennes 1. These models show how parameters such as crustal strength, tectonic inheritance and boundary conditions (ishortening/ stretching) control both the distribution of crustal strain and the possibility for pre-existing structures to be reactivated. This dataset includes top-view movies of the 12 models, including strain analysis based on displacement vectors obtained from digital image correlation. Detailed descriptions of models can be found in Guillaume et al. (2022, special issue of Solid Earth on Analogue modelling of basin inversion) to which this dataset is supplementary.

Digital Image Correlation data from oblique convergence experiments with wet kaolin

Experiments of oblique convergence at angles of 5, 10, 15, 20, 25 and 30 degrees from the margin within wet kaolin. One suite of experiments, denoted as ‘precut’, has a vertical surface precut within the clay with an electrified wire. The precut surface lies directly above the basal oblique dislocation. The other suite of experiments is ‘uncut’. Regardless of whether the experiments have a precut surface, slip partitioned fault systems, develop and persist in the experiments. Such systems have two simultaneously active faults with similar strike but different slip sense. Slip partitioning also develops regardless of whether the system first grows a reverse fault or strike slip fault in the experiment. The sequence and nature of strike-slip and reverse fault development depends on present of existing cut and convergence angle.This data set includes time series of incremental displacement maps for eleven experiments performed at the University of Massachusetts Amherst in January 2017 and March 2018 as well as animations of strain and uplift. The dataset includes the 30˚ convergence experiment with precut vertical surface but the 30˚ uncut experiment has not yet been performed. The time series data are organized into 11 netCDF files. The name of each file states the obliquity of convergence and whether the vertical surface was precut or not.Each netCDF file contains the following• ux = the incremental displacement field within the ROI (Region Of Interest) parallel to the margin (x-direction). The third dimension in the array corresponds to increment of deformation through the experiment. Units are mm.• uy = the incremental displacement field within the ROI perpendicular to the margin (y-direction). The third dimension in the array corresponds to increment of deformation through the experiment. Units are mm.• x = position parallel to the margin. Units are mm.• y = position perpendicular to the margin. Units are mm.The incremental displacements are calculated from DIC of photographs taken every 30 seconds using PIVlab (Thielicke, 2019). The net stepper motor speed is ~0.5 mm/min.The animations show strain evolution of all eleven experiments and uplift evolution of the 10 degree precut experiment. The strain evolution experiments overlay colormaps of incremental strain between successive photos on photographs of the experiment. Color saturation indicates the strain rate and hue indicates the slip vector. The uplift maps were made from stereovision analysis from pairs of photos. In most experiments, decorrelation of portions of the map prevented us from producing high quality uplift evolution animations from the start to the end of the experiment. Only the 10 degree convergence with precut vertical surface experiment had full coherence of uplift signal throughout the experiment and that animation.

Supplementary material to "Rough subducting seafloor reduces interseismic coupling and mega-earthquake occurrence: insights from analogue models"

This dataset contains digital image correlation (DIC) data of eight seismotectonic analogue experiments that were performed at the Laboratory of Experimental Tectonics (LET), Univ. Rome Tre, to investigate the effect of subduction interface roughness on the seismogenic behaviour of the megathrust. The study has been done in the framework of the Marie Sklodowska-Curie grant agreement 642029 – ITN CREEP. Together with DIC data we also provide analogue earthquake characteristics and Matlab scripts for visualization.Here we provide Digital Image Correlation data for eight experiments that last about 20 minutes (i.e., including tens of seismic cycles), of which four experiments include a smooth subduction interface and four a rough subduction interface. The DIC analysis provides a velocity field between two consecutive frames, measured at the surface of the model. Details about the nature and geometry of this interface, as well as the experimental procedure, model set-up and materials can be found in van Rijsingen et al. (2019), paragraph 2 and supporting information.A more detailed description of the data that we provide, the methods and the matlab scripts used for visualisation can be found in the data description file. An overview of the dataset can be found in the list of files.