During cruise HE644 (joint campaign of MS FRITZ REUTER and RV HEINCKE), Lagrangian surface drifters (Meyerjürgens et al., 2019; Deyle et al., 2024) were deployed from MS FRITZ REUTER, following the near-surface water motion, therefore allowing for observations within a moving water mass over extended periods with minimal disturbance to the surrounding water. Coordinates of the drifter position were transmitted by a GPS satellite tracker (inReach® Messenger from Garmin Ltd.) at two-minute intervals. Position data was processed after Deyle et al. (2024) and is available on minutely resolution in this dataset. For original trajectories see "<DOI>". In addition, the drifters were equipped with (down to 1.75 m depth) instrument chains including temperature and lightweight CTD (conductivity, temperature, depth) sensors. Depth in water was only recorded by RBRbrevio³ sensors, for others the depth was measured during sensor chain preparation and saved in the data array as fixed depth. The in situ temperature was recorded at up to six different depths using RBRsolo³, RBRbrevio³ (both sample frequency 1-2 Hz) and Aqua TROLL® 100 sensors (sample frequency 1 min-1). Conductivity was measured at up to three different depths, using RBRbrevio³ and Aqua TROLL® 100 sensors. RBR sensors were calibrated to a measurement uncertainty of ± 0.002 °C and ± 0.003 mS cm-1, whereas the TROLL sensors have a measurement uncertainty of ± 0.1 °C and ± 0.5%. For details on the sensor data processing see the appropriate processing report.
During cruise HE644 (joint campaign of MS FRITZ REUTER and RV HEINCKE), Lagrangian surface drifters (Meyerjürgens et al., 2019; Deyle et al., 2024) were deployed from MS FRITZ REUTER, following the near-surface water motion, therefore allowing for observations within a moving water mass over extended periods with minimal disturbance to the surrounding water. Coordinates of the drifter position were transmitted by a GPS satellite tracker (inReach® Messenger from Garmin Ltd.) at two-minute intervals. Position data was processed after Deyle et al. (2024) and is available on minutely resolution in this dataset. For original trajectories see "<DOI>". In addition, the drifters were equipped with (down to 1.75 m depth) instrument chains including temperature and lightweight CTD (conductivity, temperature, depth) sensors. Depth in water was only recorded by RBRbrevio³ sensors, for others the depth was measured during sensor chain preparation and saved in the data array as fixed depth. The in situ temperature was recorded at up to six different depths using RBRsolo³, RBRbrevio³ (both sample frequency 1-2 Hz) and Aqua TROLL® 100 sensors (sample frequency 1 min-1). Conductivity was measured at up to three different depths, using RBRbrevio³ and Aqua TROLL® 100 sensors. RBR sensors were calibrated to a measurement uncertainty of ± 0.002 °C and ± 0.003 mS cm-1, whereas the TROLL sensors have a measurement uncertainty of ± 0.1 °C and ± 0.5%. For details on the sensor data processing see the appropriate processing report.
This research campaign was carried out on vessel / platform: unknown. Information on the campaign: Havariekommando oil pollution combatting exercise in offshore wind farm Borkum Riffgrund 1. The campaign was carried out in the context of the following project(s): Unknown. The data of this campaign is partially published at https://doi.org/10.1594/PANGAEA.882421
This research campaign was carried out on vessel / platform: RV Heincke. Information on the campaign: RV Heincke Cruise 490. The campaign was carried out in the context of the following project(s): PACESII. The data of this campaign is partially published at https://doi.org/10.1594/PANGAEA.882329
During cruise HE644 (joint campaign of MS FRITZ REUTER and RV HEINCKE), Lagrangian surface drifters (Meyerjürgens et al., 2019; Deyle et al., 2024) were deployed from MS FRITZ REUTER, following the near-surface water motion, therefore allowing for observations within a moving water mass over extended periods with minimal disturbance to the surrounding water. Coordinates of the drifter position were transmitted by a GPS satellite tracker (inReach® Messenger from Garmin Ltd.) at two-minute intervals. Position data was processed after Deyle et al. (2024) and is available on minutely resolution in this dataset. For original trajectories see "<DOI>". In addition, the drifters were equipped with (down to 1.75 m depth) instrument chains including temperature and lightweight CTD (conductivity, temperature, depth) sensors. Depth in water was only recorded by RBRbrevio³ sensors, for others the depth was measured during sensor chain preparation and saved in the data array as fixed depth. The in situ temperature was recorded at up to six different depths using RBRsolo³, RBRbrevio³ (both sample frequency 1-2 Hz) and Aqua TROLL® 100 sensors (sample frequency 1 min-1). Conductivity was measured at up to three different depths, using RBRbrevio³ and Aqua TROLL® 100 sensors. RBR sensors were calibrated to a measurement uncertainty of ± 0.002 °C and ± 0.003 mS cm-1, whereas the TROLL sensors have a measurement uncertainty of ± 0.1 °C and ± 0.5%. For details on the sensor data processing see the appropriate processing report.
During cruise HE644 (joint campaign of MS FRITZ REUTER and RV HEINCKE), Lagrangian surface drifters (Meyerjürgens et al., 2019; Deyle et al., 2024) were deployed from MS FRITZ REUTER, following the near-surface water motion, therefore allowing for observations within a moving water mass over extended periods with minimal disturbance to the surrounding water. Coordinates of the drifter position were transmitted by a GPS satellite tracker (inReach® Messenger from Garmin Ltd.) at two-minute intervals. Position data was processed after Deyle et al. (2024) and is available on minutely resolution in this dataset. For original trajectories see "<DOI>". In addition, the drifters were equipped with (down to 1.75 m depth) instrument chains including temperature and lightweight CTD (conductivity, temperature, depth) sensors. Depth in water was only recorded by RBRbrevio³ sensors, for others the depth was measured during sensor chain preparation and saved in the data array as fixed depth. The in situ temperature was recorded at up to six different depths using RBRsolo³, RBRbrevio³ (both sample frequency 1-2 Hz) and Aqua TROLL® 100 sensors (sample frequency 1 min-1). Conductivity was measured at up to three different depths, using RBRbrevio³ and Aqua TROLL® 100 sensors. RBR sensors were calibrated to a measurement uncertainty of ± 0.002 °C and ± 0.003 mS cm-1, whereas the TROLL sensors have a measurement uncertainty of ± 0.1 °C and ± 0.5%. For details on the sensor data processing see the appropriate processing report.
During cruise HE644 (joint campaign of MS FRITZ REUTER and RV HEINCKE), Lagrangian surface drifters (Meyerjürgens et al., 2019; Deyle et al., 2024) were deployed from MS FRITZ REUTER, following the near-surface water motion, therefore allowing for observations within a moving water mass over extended periods with minimal disturbance to the surrounding water. Coordinates of the drifter position were transmitted by a GPS satellite tracker (inReach® Messenger from Garmin Ltd.) at two-minute intervals. Position data was processed after Deyle et al. (2024) and is available on minutely resolution in this dataset. For original trajectories see "<DOI>". In addition, the drifters were equipped with (down to 1.75 m depth) instrument chains including temperature and lightweight CTD (conductivity, temperature, depth) sensors. Depth in water was only recorded by RBRbrevio³ sensors, for others the depth was measured during sensor chain preparation and saved in the data array as fixed depth. The in situ temperature was recorded at up to six different depths using RBRsolo³, RBRbrevio³ (both sample frequency 1-2 Hz) and Aqua TROLL® 100 sensors (sample frequency 1 min-1). Conductivity was measured at up to three different depths, using RBRbrevio³ and Aqua TROLL® 100 sensors. RBR sensors were calibrated to a measurement uncertainty of ± 0.002 °C and ± 0.003 mS cm-1, whereas the TROLL sensors have a measurement uncertainty of ± 0.1 °C and ± 0.5%. For details on the sensor data processing see the appropriate processing report.
During cruise HE644 (joint campaign of MS FRITZ REUTER and RV HEINCKE), Lagrangian surface drifters (Meyerjürgens et al., 2019; Deyle et al., 2024) were deployed from MS FRITZ REUTER, following the near-surface water motion, therefore allowing for observations within a moving water mass over extended periods with minimal disturbance to the surrounding water. Coordinates of the drifter position were transmitted by a GPS satellite tracker (inReach® Messenger from Garmin Ltd.) at two-minute intervals. Position data was processed after Deyle et al. (2024) and is available on minutely resolution in this dataset. For original trajectories see "<DOI>". In addition, the drifters were equipped with (down to 1.75 m depth) instrument chains including temperature and lightweight CTD (conductivity, temperature, depth) sensors. Depth in water was only recorded by RBRbrevio³ sensors, for others the depth was measured during sensor chain preparation and saved in the data array as fixed depth. The in situ temperature was recorded at up to six different depths using RBRsolo³, RBRbrevio³ (both sample frequency 1-2 Hz) and Aqua TROLL® 100 sensors (sample frequency 1 min-1). Conductivity was measured at up to three different depths, using RBRbrevio³ and Aqua TROLL® 100 sensors. RBR sensors were calibrated to a measurement uncertainty of ± 0.002 °C and ± 0.003 mS cm-1, whereas the TROLL sensors have a measurement uncertainty of ± 0.1 °C and ± 0.5%. For details on the sensor data processing see the appropriate processing report.
This research campaign was carried out on vessel / platform: RV Heincke. Information on the campaign: Heinke_cruise_445. The campaign was carried out in the context of the following project(s): PACESII. The data of this campaign is partially published at https://doi.org/10.1594/PANGAEA.874511
This research campaign was carried out on vessel / platform: RV Heincke. Information on the campaign: Heincke cruise, North Sea. The campaign was carried out in the context of the following project(s): PACESII. The data of this campaign is partially published at https://doi.org/10.1594/PANGAEA.896388
| Organisation | Count |
|---|---|
| Bund | 1 |
| Wissenschaft | 52 |
| Type | Count |
|---|---|
| Daten und Messstellen | 46 |
| unbekannt | 6 |
| License | Count |
|---|---|
| Offen | 52 |
| Language | Count |
|---|---|
| Englisch | 52 |
| Resource type | Count |
|---|---|
| Archiv | 8 |
| Datei | 44 |
| Topic | Count |
|---|---|
| Boden | 20 |
| Lebewesen und Lebensräume | 14 |
| Luft | 21 |
| Mensch und Umwelt | 22 |
| Wasser | 48 |
| Weitere | 52 |