Other language confidence: 0.9703423378061625
Sediment cores PC02, PC03, and PC04 were recovered during the ship expedition MR16-09 Leg 2 of Japanese RV Mirai in 2017 (Murata et al., 2017) using piston corers. For paleo- and rock magnetic analyses clear plastic boxes with a volume of 7 cm3 were pressed into the split halves of the generally 1 m long sections of the sediment cores. X-ray fluoresence (XRF) scans were performed with an Itrax XRF Corescanner (Cox Analytical systems) at Kochi Core Center, Japan (Hagemann et al. 2024). The downcore resolution was set to 5 mm, and the scans were performed with a Mo X-ray tube at 30 kV and 55 mA for a measurement time of 15 s. The Itrax X-ray beam was set to 0.2 mm × 20 mm. Measurements of low-field magnetic susceptibility (klf same as: k-bulk) and its anisotropy (AMS) were performed with an AGICO MFK1-A susceptibility meter. The principal AMS axes Kmax, Kint, and Kmin, the three axes of the anisotropy ellipsoid, were used to calculate the degree of anisotropy, as well as the shape factor of anisotropy. The frequency dependency of magnetic susceptibility was determined with an automated MAGNON Variable Field Susceptibility Meter (VFSM) by measuring magnetic susceptibility at different frequencies with logarithmically equidistant steps at a field amplitude of 250 µT. Susceptibilities of core PC02 samples were measured at 7 frequencies F from 375 Hz to 4775 Hz. Samples from cores PC03 and PC04 were measured at 5 frequencies from 475 to 4775 Hz. The frequency dependency Dk/Dlog(F) then was determined by linear regression of susceptibility k versus the decadal logarithm of frequency F. Values are given as decay rate in percent over one frequency decade (% / decade (F)) relative to the measurement at the lowest frequency. Thus, values obtained are negative. Measurements of the natural remanent magnetization (NRM) and of the anhysteretic remanent magnetization (ARM) were performed with a 2G 755 SRM long-core cryogenic magnetometer. ARMs were produced with a 2G660 single-axis alternating field (AF) demagnetizer using 100 mT alternating field and 50 µT static field. NRMs and ARMs both were stepwise demagnetized with the in-line 3-axes AF demagnetizer of the cryogenic magnetometer. AF steps for NRM: 0, 5, 10, 15, 20, 30, 40, 50, 65, 80, 100 mT. AF steps for ARM: 0, 10, 20, 30, 40, 50, 65, 80 mT. Iso-thermal remanent magnetizations (IRM) were imparted with a 2G 660 pulse magnetizer using 1500 mT for producing a saturation magnetization (SIRM) and -200 mT for remagnetization of the low-coercive fraction. Measurements were performed with a Molyneux spinner magnetometer. Data records were turned into time series by applying the age model for PC03 (Hagemann et al., 2024), correlating PC02 to PC03, and correlating PC04 to PC03 (back to 140 ka) and further using the PISO1500 paleointensity stack (Channell et al., 2009), paleomagnetic data from the Black Sea (Liu et al., 2020, Nowaczyk et al., 2021), and paleoclimatic data from Antarctica (Jouzel et al., 2007; Bazin et al., 2013) for reference for older core sections.
Sediment cores were recovered during the ship expedition of German RV Polarstern in 2016 (PS97) using piston corers. For paleo- and rock magnetic analyses clear plastic boxes of 20×20×15 mm were pressed into the split halves of the generally 1 m long sections of the sediment cores. In order to determine the direction of the characteristic remanent magnetization (ChRM), demagnetization results of the NRM were subjected to principal component analysis (PCA) according to Kirschvink (1980). The PCA also provided the maximum angular deviation (MAD) as a measure of the precision of the determined ChRM direction. ChRM declinations obtained by PCA were rotated around a vertical axis until the declinations of all samples falling into a circular window of 35° around the direction expected from a geocentric axial dipole (-72.9°) yielded a mean of 0°. ChRM data from core PS97-085-1 (-85-3) were tentatively tilted by +17° (-7°) around the EW axis in order to parallel the maximum in the inclination distribution with the inclination of a geocentric axial dipole field. The anhysteretic susceptibility K(ARM) is defined as the ARM intensity normalised by the static field used for producing the ARM. The anhysteretic susceptibility normalised by the low field bulk susceptibility K(ARM)/klf then is a magnetic grain size proxy with low (high) ratios indicating relatively large (small) magnetite particles. In order to discriminate samples being dominated by low-coercive minerals (magnetite, Fe3O4 and greigite, Fe3S4) from samples being dominated by high-coercive minerals (mostly hematite, Fe2O3), the S-ratio was calculated using S=0.5×(1-[IRM(-200 mT)/SIRM(1500 mT)]). S-ratios range from 0 to 1, with: dominance of magnetite/greigite: 0<<S≤1, and dominance of hematite: 0≤S<<1. As another grain size proxy the ARM intensity was normalised by the SIRM: (1000×ARM/SIRM) with low (high) ratios indicating relatively large (small) magnetite particles. The factor of 1000 is introduced in order to avoid small numbers. Relative paleointensity variations were estimated by three different proxies: slope of NRM vs. ARM of common demagnetization steps (slope(NRM/ARM)), NRM intensity demagnetized with 30 mT normalized with bulk susceptibility klf (pjk(30mT)), and NRM intensity demagnetized with 30 mT normalized with saturation magnetization SIRM (pjs(30mT)). Data records were turned into time series by correlation to dated reference records from Antarctica (Wu et al., 2021) and the Black Sea (Liu et al., 2021).
This data publication includes standard rock magnetic data related to concentration, coercivity and magneto-mineralogy versus depth from twelve sediment cores recovered from the Arkhangelsky Ridge in the Southeastern Black Sea, German RV Maria S. Merian expedition MSM33 in 2013: MSM33-51-3, MSM33-52-1, MSM33-53-1, MSM33-54-3, MSM33-55-1, MSM33-56-1, MSM33-57-1, MSM33-60-1, MSM33-61-1, MSM33-62-2, MSM33-63-1, MSM33-64-1. The data are related to publications by Liu et al. (2018, 2019, 2020), Liu (2019) and Nowaczyk et al. (2012, 2013, 2018, 2021a, b). Sediment cores were recovered using gravitiy and piston corers. For paleo- and rock magnetic analyses clear plastic boxes of 20×20×15 mm were pressed into the split halves of the generally 1 m long sections of the sediment cores. Data are provided as 12 ASCII files (.dat, one for each core) with metadata header and are decribed in the associated data description file (pdf).
KTB Borehole Measurements Data - Data collection This data collection compiles the KTB Borehole Measurements Data of the German Continental Deep Drilling Program operated by the GFZ - German Research Centre for Geosciences. Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. All KTB borehole measurements are described in detail in the Scientific Technical Report - Data 21/03 "KTB Borehole Logging Data" (Kück et al. 2021). The terms borehole measurements, downhole logging, and logging are used synonymously here. The KTB logging data files contain the final processed versions of the geoscientific borehole logging data from logs in the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 logging data files from the KTB-VB and 239 logging data files from the KTB-HB. The data compilation comprises the following measurements: • Borehole geometry and orientation logs • Composite logs (compilation of standard logs of resistivity, gamma spectrum, density, neutron porosity, sonic) • Geochemical logs • Gravimetry logs • Magnetic susceptibility and field logs • Spontaneous potential and induced polarization (SP and IP) logs • Structures from borehole images, foliation, fracs, faults, joints • Temperature logs The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. There is no sonic waveform data available. There is no electrical or acoustic borehole wall image data available. However, the spatial orientation of planar structures (foliation, faults, fractures, joints) gained by manual sinus structure picking from these electrical images are included.
KTB Borehole Measurements Data Gravimetry inside the borehole Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The files of the Gravimetry measurements contain data from measurements made with a Lacoste-Romberg gravity meter sonde from the company EDCON, USA. The gravimetry logs are not depth corrected to the reference GR because the sonde had no GR sensor. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Magnetic Susceptibility and Magnetic Field Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Magnetic Susceptibility (MSUS) and Magnetic Field data files comprise data from a magnetic susceptibility sonde from the university of Munich, and two magnetometer sondes from the university of Braunschweig (FML-BS) and of Schlumberger (GPIT). MSUS was only run in the KTB-VB. The Braunschweig magnetometer was run in both KTB boreholes and the GPIT only in the KTB-HB. The MSUS log and the magnetic field log in the KTB-VB are not depth corrected to the reference GR because the sondes had no GR sensor. Both types of magnetic field logs in the KTB-HB are depth corrected to the reference GR. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Composite Logs Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Composite Log Files comprise data from these measurements/logs: • Reference total GR • Natural Gamma Spectrum (NGS) • Resistivity (DLL, DIL, MSFL, ARI) • Density (LDT, FDC) • Neutron Porosity (CNL) • Sonic (SONIC, STC) There is no sonic waveform data available. All Composite Logs are depth corrected to the reference GR of each borehole. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Spontaneous Potential and Induced Polarization (SP & IP) Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The SP and IP data files comprise data from a spontaneous potential sonde run in the KTB-VB and from two different induced polarization sondes run in both KTB-VB and KTB-HB. The SP and IP logs are not depth corrected to the reference GR because the sondes had no GR sensor. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Structures from Borehole Images: Foliation and Fracs/Faults/Joints Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Structures from Borehole Images files comprise data from processing results of electrical borehole images of both KTB boreholes. In the processing the spatial orientation (dip and dip direction) of the foliation and of other planar structures as fractures, faults, joints (etc.) was determined manually by sine structure picking on FMS/FMI images. The structural data are depth corrected to the reference GR (see Composite Logs) of the respective borehole. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
This data publication includes standard rock magnetic data related to concentration, coercivity and magneto-mineralogy versus depth from six sediment cores (M72/5-22GC3, M72-5-22GC4, M72-5-22GC6, M72-5-22GC8, M72-5-24GC3, M72-5-25GC1), collected at the Arkhangelsky Ridge in the Southeastern Black Sea during the marine expedition M72/5 of the German research vessel RV METEOR (in May 2007). The data are related to publications by Liu et al. (2018, 2019, 2020), Liu (2019) and Nowaczyk et al. (2012, 2013, 2018, 2021a, b). Sediment cores were recovered using gravity corers. For paleo- and rock magnetic analyses clear plastic boxes of 20×20×15 mm were pressed into the split halves of the generally 1 m long sections of the sediment cores. Data are provided as six ASCII files (.dat, one for each core) with metadata header, followed by 12 data columns and are decribed in the associated data description file (pdf).
| Organisation | Count |
|---|---|
| Wissenschaft | 19 |
| Type | Count |
|---|---|
| unbekannt | 19 |
| License | Count |
|---|---|
| Offen | 19 |
| Language | Count |
|---|---|
| Englisch | 19 |
| Resource type | Count |
|---|---|
| Keine | 19 |
| Topic | Count |
|---|---|
| Boden | 19 |
| Lebewesen und Lebensräume | 12 |
| Luft | 5 |
| Mensch und Umwelt | 19 |
| Wasser | 8 |
| Weitere | 19 |