Other language confidence: 0.9985361747843458
In this dataset we provide data for 6 experimental models of caldera collapse and subsequent resurgence monitored through geophysical sensors (a force or “impact sensor”, Piezotronics PCB 104 200B02 and a Triaxial piezoelectric accelerometer, Model 356B18). The analogue modelling experiments were carried out at the TOOLab (Tectonic Modelling Laboratory), which is a joint laboratory between the Istituto di Geoscienze e Georisorse of the Consiglio Nazionale delle Ricerche, Italy and the Department of Earth Sciences of the University of Florence. The laboratory work that produced these data was partly supported by the European Plate Observing System (EPOS), by the Joint Research Unit (JRU) EPOS Italia and by the “Monitoring Earth's Evolution and Tectonics” (MEET) project (NextGenerationEU). Specifically, this work was performed in the frame of the DynamiCal project, funded by the 2° TNA-NOA call of the ILGE-MEET project.
This data repository contains electrical and seismic tremor measurements, thermal infrared imagery, atmospheric conditions and information on plume heights that were recorded and collected during the 2021 Tajogaite eruption on La Palma, Canary Islands, Spain. The 2021 Tajogaite eruption lasted from 19 September until 13 December 2021. The "data description" file provides more detailed information on each dataset and the way the data is formatted. The electrical data was recorded using a Biral Thunderstorm Detector BTD-200. This sensor was installed at two consecutive locations: BTD1 (28.635°N, 17.876389°W) recorded from 11-26 October 2021 and BTD2 (28.602365°N, 17.880475°W) recorded from 27 October 2021 until the end of the eruption. The volcanic tremor measurements were recorded at seismic station PLPI (28.5722°N, 17.8654°W), which was operated by the Instituto Volcanológico de Canarias. Here we provide the seismic tremor amplitudes within the Very Long Period (0.4-0.6 Hz) and the Long Period (1-5 Hz) frequency bands between 10 September and 20 December 2021. Thermal infrared videography of the explosive volcanic activity was done using an InfraTec HD thermal infrared (TIR) video camera. This camera was installed in El Paso (28.649361°N, 17.882279°W) and recorded almost continuously between 3-8 November 2021. Here we provide individual thermal infrared frames. Atmospheric conditions were obtained from weather balloon measurements at Güímar (station nr. 60018) on Tenerife, which were provided by the University of Wyoming, Department of Atmospheric Science (http://weather.uwyo.edu/). In addition, atmospheric data was collected from ground-based weather stations at El Paso and Roque de los Muchachos, which were operated by the State Meteorological Agency (AEMET) of Spain on La Palma. Information on the volcanic plume heights was obtained from both the Toulouse Volcanic Ash Advisory Center (https://vaac.meteo.fr/volcanoes/la-palma/) as well as the Plan de Emergencias Volcánicas de Canarias.
A seismic station installed in the vicinity of a volcano can provide an overview of the state of the volcano. Different observable parameters can be extracted from the seismic time series to help monitor the temporal changes that preceding and accompanying a volcanic eruption. We calculated five seismic parameters which are Permutation Entropy (PE), Phase Permutation Entropy (PPE), Instantaneous Frequency (IF), Root-Mean-Square and Root-Median-Square (RMeS) of the seismic amplitude to detect changes prior and during the 2014-2015 Holuhraun eruption in Iceland.
SAM ("Simplified Analytical Model") is a MatLab-based software that allows for fast and flexible simulations of three-dimensional dyke pathways in an elastic medium. The model was first introduced in "Mechanical modeling of pre-eruptive magma propagation scenarios at calderas" (Mantiloni, L. et al. 2023). In SAM, dykes are modelled as penny-shaped cracks of fixed radius, opening against the local direction of the least-compressive principal stress. The direction of propagation is determined by the gradient of the external stress normal to the crack's plane and the buoyancy force of the magma filling the dyke, calculated at a set of observation points along the crack's tipline. The model can also include a uniform internal pressure within the dyke and compute the stress intensity factor along the crack's tipline, comparing it to the fracture toughness of the host rock to determine if the dyke will advance. SAM needs a model for the stress field of the host rock as input, as well as magma and rock densities, rock elastic properties, the dyke's radius and the number of observation points. The model may be applied to simulate dyke pathways in realistic volcanic settings with different stress sources, and can perform large numbers of simulations in little time. The model does not, however, account for any viscous flow of magma within the dyke, nor the velocity of dyke propagation. Dykes cannot change shape or area during the propagation, and are always bound to be oriented normally to the local least-compressive principal stress axis. This repository also includes data and parameters of the synthetic scenarios discussed in "Mechanical modeling of pre-eruptive magma propagation scenarios at calderas".
These data files contain short periods of electrical data recorded at Stromboli volcano, Italy, in 2019 and 2020 using a prototype version of the Biral Thunderstorm Detector BTD-200. This sensor consists of two antennas, the primary and secondary antenna, which detect slow variations in the electrostatic field resulting from charge neutralisation due to electrical discharges. The sensor recorded at three different locations: BTD1 (38.79551°N, 15.21518°E), BTD2 (38.80738°N, 15.21355°E) and BTD3 (38.79668°N, 15.21622°E). Electrical data of the following explosions is provided (each in a separate data file): - Three Strombolian explosions on 12 June 2019 at 12:46:53, 12:49:27 and 12:56:10 UTC, respectively. - A major explosion on 25 June 2019 at 23:03:08 UTC. - A major explosion on 19 July 2020 at 03:00:42 UTC. - A major explosion on 16 November 2020 at 09:17:45 UTC. - A paroxysmal event at 3 July 2019 at 14:45:43 UTC. Each filename indicates the location of the BTD, the starting date and time of the file in UTC, and a short description of the three data columns inside the file (unixtime, primary, secondary). The first column provides the Unix timestamp of each data point, which is the time in seconds since 01/01/1970. All time is provided in UTC. The second column provides the measured voltage [V] recorded by the primary antenna. The third column provides the measured voltage [V] recorded by the secondary antenna.
This dataset collects the results of a series of experiments carried out on air-filled cracks injected into pigskin gelatin blocks between September 2019 and May 2020 at GFZ German Research Centre for Geosciences in Potsdam (Germany). Such experiments were intended to simulate dike propagation in the upper crust, in settings where tectonic and surface unloading stress are dominant in determining the stress field within the medium. The gelatin blocks were laterally strained and rift-like excavations were moulded on their surfaces. These data include pictures of each experimental setup and video records of each injected crack, as well as tables collecting the measured arrival points of the cracks at the surface of the gelatin and relevant elastic and geometric parameters. The data publication is a Supplement to Mantiloni et al. (2020): "Stress inversion in a gelatin box: testing eruptive vent location forecasts with analog models" (Geophys. Res. Lett.), to which the reader is referred for further information.
| Organisation | Count |
|---|---|
| Wissenschaft | 6 |
| Type | Count |
|---|---|
| unbekannt | 6 |
| License | Count |
|---|---|
| Offen | 5 |
| Unbekannt | 1 |
| Language | Count |
|---|---|
| Englisch | 6 |
| Resource type | Count |
|---|---|
| Keine | 6 |
| Topic | Count |
|---|---|
| Boden | 3 |
| Lebewesen und Lebensräume | 3 |
| Luft | 2 |
| Mensch und Umwelt | 5 |
| Weitere | 6 |