Barley (Hordeum vulgare) is an important cereal grain which serves as major animal fodder crop as well as basis for malt beverages or staple food. Currently barley is ranked fourth in terms of quantity of cereal crops produced worldwide. In times of a constantly growing world population in conjunction with an unforeseeable climate change and groundwater depletion, the accumulation of knowledge concerning cereal growth and rate of yield gain is important. The Nordic Genetic Resource Center holds a major collection of barley mutants produced by irradiation or chemical treatment. One phenotypic group of barley varieties are dwarf mutants (erectoides, brachytic, semidwarf, uzu). They are characterized by a compact spike and high rate of yield while the straw is short and stiff, enhancing the lodging resistance of the plant. Obviously they are of applied interest, but they are also of scientific interest as virtually nothing is known about the genes behind the development of plant dwarfism. The aim of this project is to identify and isolate the genes carrying the mutations by using state of the art techniques for gene cloning at the Carlsberg Laboratory. The identified genes will be connected with the mutant phenotype to reveal the gene function in general. One or two genes will be overexpressed and the resulting recombinant proteins will be biochemically and structurally characterized. The insights how the mutation effects the protein will display the protein function in particular. Identified genes and their mutant alleles will be tested in the barley breeding program of the Carlsberg brewery.
Background: Ghanas transition forests, neighbouring savannahs and timber plantations in the Ashanti region face a constant degradation due to the increased occurrence of fires. In most cases the fires are deliberately set by rural people for hunting purposes. Main target is a cane rat, here called grasscutter (Thryonomys swinderianus), whose bushmeat is highly esteemed throughout the country. The animal is a wild herbivorous rodent of subhumid areas in Africa south of the Sahara. The grasscutter meat is an important source of animal protein. Existing high-value timber plantations (mainly Teak, Tectona grandis) are affected by fires for hunting purposes. Thus resulting in growth reduction, loss of biomass or even complete destruction of the forest stands. It became obvious that solutions had to be sought for the reduction of the fire risk. Objectives: Since 2004 the Institute for World Forestry of the Federal Research Centre for Forestry and Forest Products, Hamburg, Germany is cooperating with a Ghanaian timber plantation company (DuPaul Wood Treatment Ltd.) the German Foundation for Forest Conservation in Africa (Stiftung Walderhaltung in Afrika) and the Center for International Migration with the purpose to improve the livelihood of the rural population in the surroundings of the forest plantation sites and simultaneously to safeguard and improve the timber plantations. The introduction of grasscutter rearing systems to local farmers accompanied by permanent agricultural and agroforestry practices appeared to be a promising approach for the prevention of fires in the susceptible areas. Additionally a functioning grasscutter breeding system could contribute to the improvement of food security, development of income sources and the alleviation of poverty. The following measures are implemented: - Identification of farmers interested in grasscutter captive breeding, - Implementation of training courses for farmers on grasscutter rearing, - Delivery of breeding animals, - Supervision of rearing conditions by project staff, - Development of a local extension service for monitoring activities, - Evaluation of structures for grasscutter meat marketing. Results: After identification of key persons for animal rearing training courses were successfully passed and animals were delivered subsequently. Further investigations will evaluate the effects of the grasscutter rearing in the project region. This will be assessed through the - Acceptance of grasscutter rearing by farmers, - Success of the animal caging, - Reproduction rate, - Meat quality, - Marketing success of meat, - Reduction of fire in the vicinity of the timber plantations, - Improvement of peoples livelihood.
The natural capital of forests consists to a great extend of the forests environmental functions for human well-being, which not only include goods and services (source and sink functions) but also include life-support functions that reflect ecosystem performance (ecosystem functioning). Shifting the management approach from a traditional one to one that is more aware of the ecosystem complexity, the idea of 'ecosystem functioning is appearing to tackle gradual declines of ecosystem functions. Within CBDs framework, the Ecosystem Approach has been introduced on account of the necessity for open decision making with strong links between all stakeholders and the latest scientific knowledge due to uncertainty and unpredictability in nature. The Ecosystem Approach is still in need of further elaboration, even though as a concept Ecosystem Approach has been widely accepted. To aim forest enhancement, this approach has been regarded as the most feasible concept for the study area, the Bengawan Solo River Basin - Java, Indonesia. Therefore the principles and operational guidelines will be used to analyse and evaluate the current forest management in those areas of the Bengawan Solo River Basin, in which ecosystem function is the basis for forest development area. This research focuses on ecological functions of forests at various levels of ecosystem management planning, from the forestry sectors point of view.
In this project we experimentally explore the transport of engineered inorganic nanoparticles (EINP) through soils. This is done for original EINPs and some pre-aged form. Transport of NPs in soil is expected to be different from that of reactive solutes, in that hydrodynamic drag, inertial and shear forces as well as the affinity to water-gas interfaces are expected to be more relevant. Hence, the mobility of EINPs in soil is highly sensitive to the morphology of the porous structure and the dynamics of water saturation.This project provides the pore network structure for natural soils using X-ray micro-tomography to allow for an up-scaling of pore-scale interactions explored by project partners to the scale of soil horizons. The pore structure is represented by a network model suitable for pore scale simulations including the dynamics of water-gas interfaces.Pore network simulations will be compared to column experiments for conservative tracers as well as for unaltered and pre-aged EINPs (obtained from INTERFACE). This includes steady state flow scenarios for saturated (ponding) and unsaturated conditions as well as for transient flow to explore the impact of moving water-gas interfaces. The final goal is to arrive at a consistent interpretation of experimental findings and numerical simulations to develop a module for modelling EINP transfer through soil as a function of particle properties, soil structural characteristics and external forcing in terms of flux boundary conditions.
The nature of the microbial communities inhabiting the deeper soil horizons is largely unknown. It is also not clear why subsurface microorganisms do not make faster use of organic compounds under field conditions. The answer could be provided by a reciprocal soil transfer experiment studying the response of transferred soils to fluctuations in microclimate, organic inputs, and soil biota. The subproject P9 will be responsible for the establishment of reciprocal transfer experiments offering a strong link between subgroups interested in organic matter quality, transport of organic substances, as well as functions of the soil microbial community. A single, high molecular weight substrate (13C labelled cellulose) will be applied at two different levels in the pre-experiment to understand the dose-dependent reaction of soil microorganisms in transferred surface and sub-soils. Uniformly 13C labelled beech roots - representing complex substrates - will be used for the main reciprocal soil transfer experiment. We hypothesize that transferring soil cores between subsoil and surface soil as well as addition of labelled cellulose or roots will allow us to evaluate the relative impact of surface/subsurface habitat conditions and resource availability on abundance, function, and diversity of the soil microbial community. The second objective of the subproject is to understand whether minerals buried within different soil compartments (topsoil vs. subsoil) in the field contribute to creation of hot spots of microbial abundance and activity within a period of two to five years. We hypothesize that soil microorganisms colonize organo-mineral complexes depending on their nutritional composition and substrate availability. The existence of micro-habitat specific microbial communities could be important for short term carbon storage (1 to 6 years). The third objective is to understand the biogeography and function of soil microorganisms in different subsoils. Parent material as well as mineral composition might control niche differentiation during soil development. Depending on size and interconnectedness of niches, colonization and survival of soil microbial communities might be different in soils derived from loess, sand, terra fusca, or sandstone. From the methodological point of view, our specific interest is to place community composition into context with soil microbial functions in subsoils. Our subgroup will be responsible for determining the abundance, diversity, und function of soil microorganisms (13C microbial biomass, 13C PLFA, enzyme activities, DNA extraction followed by quantitative PCR). Quantitative PCR will be used to estimate total abundances of bacteria, archaea and fungi as well as abundances of specific groups of bacteria at high taxonomic levels. We will apply taxa specific bacterial primers because classes or phyla might be differentiated into ecological categories on the basis of their life strategies.
Die Bildung der Eis Phase in der Troposphäre stellt einen wichtigen Fokus der aktuellen Atmosphärenforschung dar. Durch heterogene Nukleation entstehen bei Temperaturen oberhalb von -37°C primäre Eiskristalle an sogenannten eiskeimbildenden Partikeln (INP, engl, ice nucleating particles). Die räumliche Verteilung der INP und deren Quellen variieren stark. In der Atmosphäre finden sich INP nur in sehr geringer Anzahlkonzentration, oft weniger als ein Partikel pro Liter, und sie stellen nur eine kleine Untergruppe des gesamten atmosphärischen Aerosols dar. Ziel dieses Antrages ist es die Anzahlkonzentrationen von eiskeimbildenden Partikeln und deren Variabilität in der Atmosphäre zu messen. Außerdem sind Laborstudien geplant, in denen unser Verständnis über die chemischen und biologischen Eigenschaften der Partikel, die die Eisbildung initiieren, verbessert werden soll. Mit dem von unserer Arbeitsgruppe entwickelten Eiskeimzahler FINCH (Fast Ice Nucleaus CHamber) sollen die atmosphärischen Anzahlkonzentrationen von INP bei verschiedenen Gefriertemperaturen und Übersättigungen an mehreren Standorten gemessen werden. Die Kopplung von FINCH mit einem virtuellen Gegenstromimpaktor (CVI, engl, counter-flow virtual impactor, Kooperation mit RP2), die während lNUIT-1 entwickelt und getestet wurde, soll nun weiter charakterisiert und Messungen damit fortgesetzt werden. Bei dieser Methode werden die Eispartikel, die in FINCH gebildet werden, von den unterkühlten Tröpfchen und inaktivierten Partikeln separiert und mit weiteren Messmethoden untersucht. In Kooperation mit RP2 und RP8 planen wir hierbei die Charakterisierung der INP mittels Größen- und Aerosolmassenspektrometer sowie die Sammlung der INP auf Filtern oder Impaktorplatten zur anschließenden Analyse mit einem Elektronenmikroskop (ESEM, engl. DFG fomi 54.011 -04/14 page 3 of 6 Environmental Scanning Electron Microscopy). Die Feldmessdaten werden von umfangreichen Laborstudien an den Forschungseinrichtungen AIDA (RP6) und LACIS (RP7) ergänzt. Dort soll das Immersionsgefrieren von verschiedenen Testpartikeln aus biologischem Material (z.B. Zellulose), porösem Material (z.B. Zeolith) und Mineralstaub mit geringem organischem Anteil im Detail untersucht werden. Des Weiteren planen wir Labormessungen, bei denen eine verbesserte Charakterisierung der Messunsicherheiten von FINCH erarbeitet werden soll. Außerdem werden regelmäßige Tests und Kalibrierungen mit FINCH durchgeführt, für die Standardroutinen festgelegt werden sollen. Um die Rolle der INP bei der Wolken- und Niederschlagsbildung sowie bei den Wolkeneigenschaften abzuschätzen, werden die gewonnenen Messergebnisse am Ende als Eingabeparameter für erweiterte Wolkenmodelle (Kooperation mit WP-M) dienen.
Biogeochemical interfaces shape microbial community function in soil. On the other hand microbial communities influence the properties of biogeochemical interfaces. Despite the importance of this interplay, basic understanding of the role of biogeochemical interfaces for microbial performance is still missing. We postulate that biogeochemical interfaces in soil are important for the formation of functional consortia of microorganisms, which are able to shape their own microenvironment and therefore influence the properties of interfaces in soil. Furthermore biogeochemical interfaces act as genetic memory of soils, as they can store DNA from dead microbes and protect it from degradation. We propose that for the formation of functional biogeochemical interfaces microbial dispersal (e.g. along fungal networks) in response to quality and quantity of bioavailable carbon and/or water availability plays a major role, as the development of functional guilds of microbes requires energy and depends on the redox state of the habitat.To address these questions, hexadecane degradation will be studied in differently developed artificial and natural soils. To answer the question on the role of carbon quantity and quality, experiments will be performed with and without litter material at different water contents of the soil. Experiments will be performed with intact soil columns as well as soil samples where the developed interface structure has been artificially destroyed. Molecular analysis of hexadecane degrading microbial communties will be done in vitro as well as in situ. The corresponding toolbox has been successfully developed in the first phase of the priority program including methods for genome, transcriptome and proteome analysis.
The magnetosphere of a planet is controlled by a number of factors such as the intrinsic magnetic field, the atmosphere and ionosphere, and the solar wind. Different combinations of these control factors are at work at the terrestrial planets Mercury, Venus, Earth, and Mars, hence they form a very suitable set for quantitative comparative studies. A significant intrinsic dipolar magnetic field is present only on Earth and on Mercury. However, the configuration at Mercury differs considerably from that at Earth because Mercury does not support an atmosphere and ionosphere, the dipolar field is much weaker, the solar wind denser, and the interplanetary magnetic field stronger. Both Mars and Venus have atmospheres but lack a global planetary magnetic field, with regional crustal magnetization being present on Mars. This proposal aims at investigating and comparing electrical current systems in the space environments of terrestrial planets using magnetic vector data collected by orbiting spacecraft such as Venus Express, Mars Global Surveyor, CHAMP (Earth), and MESSENGER (Mercury). We propose to construct data-driven and physically meaningful representations that reveal and quantify the influence of various control factors. To achieve this, we will tailor Empirical Orthogonal Function (EOF) analysis and other multivariate methods to the specifics of planetary magnetic field observations. In contrast to representations that build on predefined functions like spherical harmonics, basis functions in the EOF approach are derived directly from the data. EOFs are designed to extract dominant coherent variations for further interpretation in terms of known physical phenomena, and then, in a regression step, for modeling using suitable control variables. The EOF methodology thus allows quantifying the relative importance of control factors for each planet individually, and thus contributes to the solution of topical science questions. The resulting empirical models will facilitate comparative studies of current systems at the terrestrial planets.
Dairy farming across Germany displays diverse production systems. Factor endowment, management, technology adoption as well as competitive dynamics in the local or regional land, agribusiness and dairy processing sectors contribute to this differentiation on farm level. These differences impact on the ability of dairy farms and regional dairy production systems to successfully respond to pressures arising from future market and policy changes. The overall objective of the research activities of which this project is a part of, is to develop a thorough understanding of the processes that govern the spatial dynamics of dairy farm development in different regions in Germany. The central hypothesis of this research project is that management system and technological choices differ systematically across local production and market conditions. The empirical approach will focus on the estimation of farm specific nonparametric cost functions for dairy farms located in across Germany differentiated by time and location. A spatially differentiated data base with information on input use, resource availability, as well as local market conditions for land and output markets will be compiled. The nonparametric approach is specifically suited to disclose a more accurate representation of dairy production system heterogeneity across locations and time compared to parametric concepts as it provides the necessary flexibility to accommodate non-linearities relevant for a wide domain of explanatory variables. The methodology employed goes beyond the state of the art of the literature as it combines kernel density estimation with a Bayesian sampling approach to provide theory consistent parameters for each farm in the data sample.The specific methodological hypothesis is that the nonparametric approach is superior to current parametric techniques and this hypothesis is tested using statistical model evaluation. Regarding the farm management and technological choices, we hypothesize that land suitability for feed production determines the farm intensity of dairy production and thus management and technological choices. With respect to the ability of farms to successfully respond to market pressures we hypothesize that farms at the upper and lower tail of the intensity distribution both can generate positive returns from dairy production. These last two hypotheses will be tested using the estimated spatially differentiated farm specific costs and marginal costs.The expected outcomes are of relevance for the agricultural sector and the food supply chain economy as a whole as fundamental market structure changes in the dairy sector are ongoing due to the abolition of the quota regulation in the years 2014/2015. Thus, exact knowledge about differences and development of dairy cost heterogeneity of farms within and between regions are an important factor for the actors involved in the market as well as the political support of this process.
The formation of biogeochemical interfaces in soils is controlled, among other factors, by the type of particle surfaces present and the assemblage of organic matter and mineral particles. Therefore, the formation and maturation of interfaces is studied with artificial soils which are produced in long-term biogeochemical laboratory incubation experiments (3, 6, 12, 18 months. Clay minerals, iron oxides and charcoal are used as major model components controlling the formation of interfaces because they exhibit high surface area and microporosity. Soil interface characteristics have been analyzed by several groups involved in the priority program for formation of organo-mineral interfaces, sorptive and thermal interface properties, microbial community structure and function. Already after 6 months of incubation, the artificial soils exhibited different properties in relation to their composition. A unique dataset evolves on the development and the dynamics of interfaces in soil in the different projects contributing to this experiment. An integrated analysis based on a conceptual model and multivariate statistics will help to understand overall processes leading to the biogeochemical properties of interfaces in soil, that are the basis for their functions in ecosystems. Therefore, we propose to establish an integrative project for the evaluation of data obtained and for publication of synergistic work, which will bring the results to a higher level of understanding.