A network of 210 continuously running, digital seismic stations equipped with short-period sensors (200 stations) and broadband sensors (10 stations) was deployed in an area of ~8 x ~6 km in the Irish Midlands (north of Collinstown) for a time period of ~6 weeks. The network was part of the EU project VECTOR (https://vectorproject.eu) aiming to investigate – among others – possible solutions for least invasive forms of exploration for mineral resources. In this context the collected data was mainly used to derive a 3D model of the subsurface (seismic shear wave velocity) using ambient noise tomography (down to ~1.5km depth). We thank all field crews for their excellent work rendered to the project. Waveform data is available from the GEOFON data centre, under network code 7W.
In October 2021, GFZ installed together with INGV Catania, Iraci and ASIR Ltd (Advances Seismic Instrumentation & Research) the very first seismic borehole broadband seismometers at two selected sites at Mt. Etna, Sicily (see Fig. 1). The installation was completed under the EU-funded project ‘SiC nano for PicoGeo’ (http://www.picogeo.eu/). Site one is located next to the Astrophysical Observatory at Serra La Nave (SLN) and site two is located in the city of Mascalucia (MAS). At each site one borehole broadband seismometer was permanently installed (cemented) at approximately 70 m depth. In approx. 1-2m distance, a second ground-level borehole 4.5 Hz Geophone was temporarily installed (sanded) at 1 m depth until July 2022 (see Fig. 2). The ground-level geophones served as a local surface reference sensor to better evaluate the increase of signal quality from surface to depth. Test data were evaluated between October 2021 and July 2022. Sensor settings were adjusted during this time period to obtain the best possible data resolution at both test sites. This data publication compiles a segment of waveform recordings utilized for the assessment of data quality from the two installed broadband borehole seismometers, along with noise plots (Fig. 3-5) illustrating the enhancements in the data quality of frequency ranges compared to surface sensors at Mt. Etna.
Ziel des Verbundprojektes ist die Nutzbarmachung hochauflösender Scherwellenseismik zum routinemäßigen Gebrauch durch Bauingenieure und Geotechniker bei der Baugrunderkundung bzw. bei Standortgefährdungsanalysen. Das Verbundprojekt wird der Universität Potsdam koordiniert. Es besteht aus vier Teilprojekten. Im Wesentlichen wird die Weiterentwicklung von Akquisition- und Auswertestrategien für tomographische Messungen auf lokaler und regionaler Skala vorangetrieben. Der Schwerpunkt liegt zum einen auf der Entwicklung und Erprobung von effizienten Datenakquisitionsstrategien sowie von Inversionsverfahren u.a. auch zur Quantifizierung von Fehlergrenzen bei der S-Wellengeschwindigkeitsbestimmung und zum anderen in der Entwicklung eines Instrumentariums zur Standortgefährdungsanalyse. Die Weiterentwicklungen von Messmethoden für Feldeinsätze mit dem Schwerpunkt der Verbesserung von Ableitungen räumlicher geotechnischer Parameter (Gesteinseigenschaften) aus Scher- und Kompressionswellenmessungen in Bohrlöchern unter Verwendung von 'Direct Push' Methoden ist ebenfalls ein wichtiger Aspekt des Projekts, das auch die technologisch apparativen Weiterentwicklung von Messapparaturen beinhaltet. Es soll ein Mehrstations- Bohrlochaufnehmersystem für die Scherwellentomographie entwickelt werden.