Other language confidence: 0.580638627126936
Conductivity-temperature-depth profiles were measured using a Seabird SBE 911plus CTD during RV HEINCKE cruise HE656. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer and an altimeter (PSA-916 Teledyne (Benthos)) were mounted to the CTD. Temperature, conductivity and oxygen sensors are calibrated by the manufacturer once a year before being mounted in January. They are used throughout the year and no post-cruise or in-situ calibration is applied. All other sensors are calibrated irregularly. Data were connected to the station book of the specific cruise as available in the DSHIP database. Processing of the data including removal of obvious outliers followed the procedures described in CTD Processing Logbook of RV HEINCKE (hdl:10013/epic.47427). The processing report for this dataset is linked below.
Raw data acquired by a thermosalinograph (SBE21, Sea-Bird GmbH) in combination with an external temperature sensor (SBE38, Sea-Bird GmbH) aboard RV Heincke were processed to generate a calibrated, quality-controlled dataset of seawater temperature and salinity. The raw sensor data were initially retrieved from the DSHIP database (https://dship.awi.de) at a temporal resolution of 1 second and converted into temperature and conductivity using the pre-deployment calibration coefficients. The thermosalinograph system aboard RV Heincke is typically replaced after each expedition season, with a recalibration conducted at the manufacturer's facilities after each exchange. After post-cruise recalibration of the instruments, additional correction factors were calculated and applied to account for sensor drift. Salinity was calculated from internally measured temperatures and conductivities following the Practical Salinity Scale (PSS-78). The processed dataset is provided as 1-minute averages of salinity and seawater external temperature, synchronized with the positional data from the expedition's master track. Quality flags were assigned in accordance with the SeaDataNet Data Quality Control Procedures (May 2010).
Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).
Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).
Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).
Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).
Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).
Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).
Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).
Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).
| Organisation | Count |
|---|---|
| Bund | 1 |
| Land | 1 |
| Wissenschaft | 21 |
| Type | Count |
|---|---|
| Daten und Messstellen | 21 |
| unbekannt | 1 |
| License | Count |
|---|---|
| Offen | 21 |
| Unbekannt | 1 |
| Language | Count |
|---|---|
| Englisch | 22 |
| Resource type | Count |
|---|---|
| Datei | 21 |
| Webseite | 1 |
| Topic | Count |
|---|---|
| Boden | 21 |
| Lebewesen und Lebensräume | 21 |
| Luft | 12 |
| Mensch und Umwelt | 22 |
| Wasser | 13 |
| Weitere | 22 |