API src

Found 11 results.

Physical oceanography during RV HEINCKE cruise HE656

Conductivity-temperature-depth profiles were measured using a Seabird SBE 911plus CTD during RV HEINCKE cruise HE656. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer and an altimeter (PSA-916 Teledyne (Benthos)) were mounted to the CTD. Temperature, conductivity and oxygen sensors are calibrated by the manufacturer once a year before being mounted in January. They are used throughout the year and no post-cruise or in-situ calibration is applied. All other sensors are calibrated irregularly. Data were connected to the station book of the specific cruise as available in the DSHIP database. Processing of the data including removal of obvious outliers followed the procedures described in CTD Processing Logbook of RV HEINCKE (hdl:10013/epic.47427). The processing report for this dataset is linked below.

Raw data of physical oceanography during RV HEINCKE cruise HE656

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE . The CTD was equipped with duplicate sensors for temperature (SBE3plus) and conductivity (SBE4) as well as one sensor for oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below.

Physical oceanography during RV HEINCKE cruise HE651

Conductivity-temperature-depth profiles were measured using a Seabird SBE 911plus CTD during RV HEINCKE cruise HE651. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer and an altimeter (PSA-916 Teledyne (Benthos)) were mounted to the CTD. Temperature, conductivity and oxygen sensors are calibrated by the manufacturer once a year before being mounted in January. They are used throughout the year and no post-cruise or in-situ calibration is applied. All other sensors are calibrated irregularly. Data were connected to the station book of the specific cruise as available in the DSHIP database. Processing of the data including removal of obvious outliers followed the procedures described in CTD Processing Logbook of RV HEINCKE (hdl:10013/epic.47427). The processing report for this dataset is linked below.

Raw data of physical oceanography during RV HEINCKE cruise HE651

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE . The CTD was equipped with duplicate sensors for temperature (SBE3plus) and conductivity (SBE4) as well as one sensor for oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below.

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE651

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE650

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE636

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

Physical oceanography during RV HEINCKE cruise HE626

Conductivity-temperature-depth profiles were measured using a Seabird SBE 911plus CTD during RV HEINCKE cruise HE626. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer and an altimeter (PSA-916 Teledyne (Benthos)) were mounted to the CTD. Temperature, conductivity and oxygen sensors are calibrated by the manufacturer once a year before being mounted in January. They are used throughout the year and no post-cruise or in-situ calibration is applied. All other sensors are calibrated irregularly. Data were connected to the station book of the specific cruise as available in the DSHIP database. Processing of the data including removal of obvious outliers followed the procedures described in CTD Processing Logbook of RV HEINCKE (hdl:10013/epic.47427). The processing report for this dataset is linked below.

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE626

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE616

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

1 2