API src

Found 451 results.

Raw data of physical oceanography during RV HEINCKE cruise HE672

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below (Other version).

High-resolution measurements of essential climate variables in the North Sea from the autonomous surface vehicle HALOBATES during RV Heincke cruise HE626/2

During the RV Heincke cruise HE626/2 in the German Bight, the autonomous surface vehicle HALOBATES was deployed to obtain high-resolution measurements of key climate variables, including sea surface temperature (SST) and salinity (SSS). The platform sampled the upper ocean across seven depths, with approximately 10 cm vertical spacing, extending from the near-surface layer (NSL; approximately 30–100 cm depth) to the sea-surface microlayer (SML), which occupies the uppermost millimetres of the ocean. Temperature and conductivity, from which salinity was derived, were measured using conductivity–temperature–depth (CTD) sensors integrated into HALOBATES' flow-through system. Additional temperature sensors mounted beneath the catamaran provided in situ observations at six NSL depths. Discrete water samples were used to calibrate the salinity measurements and account for potential sensor offsets. Meteorological conditions were simultaneously monitored using two data loggers equipped with meteorological stations installed on the catamaran. HALOBATES operated continuously during the deployment period from 27 October to 2 November 2023.

Raw data of physical oceanography during RV HEINCKE cruise HE689

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below (Other version).

Physical oceanography during RV HEINCKE cruise HE689

Conductivity-temperature-depth profiles were measured using a Seabird SBE 911plus CTD during RV HEINCKE cruise HE689. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer and an altimeter (PSA-916 Teledyne (Benthos)) were mounted to the CTD. Temperature, conductivity and oxygen sensors are calibrated by the manufacturer once a year before being mounted in January. They are used throughout the year and no post-cruise or in-situ calibration is applied. All other sensors are calibrated irregularly. Data were connected to the station book of the specific cruise as available in the DSHIP database. Processing of the data including removal of obvious outliers followed the procedures described in CTD Processing Logbook of RV HEINCKE (hdl:10013/epic.47427). The processing report for this dataset is linked below.

Raw data of physical oceanography during RV HEINCKE cruise HE682

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below (Other version).

Raw data of physical oceanography during RV HEINCKE cruise HE678

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below (Other version).

Raw data of physical oceanography during RV HEINCKE cruise HE658

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below (Other version).

Raw data of physical oceanography during RV HEINCKE cruise HE659

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below (Other version).

Physical oceanography during RV HEINCKE cruise HE681

Conductivity-temperature-depth profiles were measured using a Seabird SBE 911plus CTD during RV HEINCKE cruise HE681. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer and an altimeter (PSA-916 Teledyne (Benthos)) were mounted to the CTD. Temperature, conductivity and oxygen sensors are calibrated by the manufacturer once a year before being mounted in January. They are used throughout the year and no post-cruise or in-situ calibration is applied. All other sensors are calibrated irregularly. Data were connected to the station book of the specific cruise as available in the DSHIP database. Processing of the data including removal of obvious outliers followed the procedures described in CTD Processing Logbook of RV HEINCKE (hdl:10013/epic.47427). The processing report for this dataset is linked below.

Physical oceanography during RV HEINCKE cruise HE685

Conductivity-temperature-depth profiles were measured using a Seabird SBE 911plus CTD during RV HEINCKE cruise HE685. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer and an altimeter (PSA-916 Teledyne (Benthos)) were mounted to the CTD. Temperature, conductivity and oxygen sensors are calibrated by the manufacturer once a year before being mounted in January. They are used throughout the year and no post-cruise or in-situ calibration is applied. All other sensors are calibrated irregularly. Data were connected to the station book of the specific cruise as available in the DSHIP database. Processing of the data including removal of obvious outliers followed the procedures described in CTD Processing Logbook of RV HEINCKE (hdl:10013/epic.47427). The processing report for this dataset is linked below.

1 2 3 4 5 … 44 45 46