The data-set contains nine apatite fission-track data from samples collected at strategic locations to constrain the age of deformation along an ideal transect crossing the main Apennine watershed (from the north-eastern margin of the Casentino Basin to the Romagna Apennines. Apatite grains for fission-track analysis were separated from ~5 kg bulk samples. Four of them were collected from the Falterona Sandstones (Chattian-Aquitanian) and five in the Marnoso- Arenacea For-mation (Burdigalian-Tortonian). Apatite grains were separated using standard heavy liquids and a mag-netic technique.
This dataset provides point-shapefiles and geotiffs, related to the figures presented in (Frick et al., 2022a, 2022b). It covers most of northern Germany, with the boundaries defined by the extent of the North German Basin, which is part of the Central European Basin System. The files contain information on the depth (m.b.s. = meter below surface), thickness, temperature, heat in place and heat storage potential of selected geological units and the formations therein. These data are an addendum to the data presented in (Frick et al., 2022a, 2022b), resolving 5 geological units and 9 formations. The data are presented as regularly spaced point-shapefiles, with a spacing of 1000 m. The data were produced as part of the Helmholtz Climate Initiative (HICAM), which focuses on Net Zero 2050 (mitigation) and Adapting to Extreme Events (adaptation). As part of this initiative, estimates of the heat in place and heat storage potential of the subsurface play an important part for mitigation of fossil fuel bound emissions as they pose a promising alternative (geothermal energy). The data presented here, therefore give an overview of areas which might be suited for geothermal applications in the different geothermal target units and formations. We integrated the recently published TUNB Model (BGR et al., 2021) as well as available borehole data, data from the Sandsteinfazies and GeoPoNDD projects (Franz et al., 2018, 2015) and temperature data from two models (Agemar et al., 2014; Frick et al., 2021) the process of which will be described in the following.
This dataset shows the original data of a series of enhanced-gravity (centrifuge) analogue models, which were performed to test the influence of the pre-existing fabrics in the brittle upper crust on the evolution of structures resulting from oblique rifting. The obliquity of the rift (i.e., the angle between the rift axis and the direction of extension) was kept constant at 30° in all the models. The main variable of this experimental series was the orientation of the pre-existing fabrics (indicated as the angle between the trend of the fabric and the orthogonal to extension), which varied from 0° to 90° (i.e., from orthogonal to parallel to the extension direction). The inherited discontinuities were reproduced by cutting with a knife through the top brittle layer of models. An overview of the experimental series is shown in Table 1. In this dataset, four different data types are provided for further analysis: 1) Top-view photos of model deformation, taken at different time intervals and showing the deformation process of each model; they can be used to interpret the geometrical characteristics of rift-related faults; 2) Digital Elevation Models (DEMs) used to reconstruct the 3D deformation of the analogue models, allowing for quantitative analysis of the fault pattern. 3) Movies of model deformation, built from top-view photos, which help to visualize the evolution of model deformation; 4) Faults line-drawings to be used for statistical quantification of rift-related structures. Further information on the modelling strategy and setup can be found in the publication associated to this dataset and in Corti (2012), Philippon et al. (2015), Maestrelli et al. (2020), Molnar et al. (2020), Zwaan et al. (2021), Zou et al. (2023). Materials used to perform these enhanced-gravity analogue models were described in Montanari et al. (2017), Del Ventisette et al. (2019) and Zwaan et al. (2020).
This dataset presents the raw data from two experimental series of analogue models and four numerical models performed to investigate Rift-Rift-Rift triple junction dynamics, supporting the modelling results described in the submitted paper. Numerical models were run in order to support the outcomes obtained from the analogue models. Our experimental series tested the case of a totally symmetric RRR junction (with rift branch angles trending at 120° and direction of stretching similarly trending at 120°; SY Series) or a less symmetric triple junction (with rift branches trending at 120° but with one of these experiencing orthogonal extension; OR Series), and testing the role of a single or two phases of extension coupled with effect of differential velocities between the three moving plates. An overview of the performed analogue and numerical models is provided in Table 1. Analogue models have been analysed quantitatively by means of photogrammetric reconstruction of Digital Elevation Model (DEM) used for 3D quantification of the deformation, and top-view photo analysis for qualitative descriptions. The analogue materials used in the setup of these models are described in Montanari et al. (2017), Del Ventisette et al. (2019) and Maestrelli et al. (2020). Numerical models were run with the finite element software ASPECT (e.g., Kronbichler et al., 2012; Heister et al., 2017; Rose et al., 2017).
We provide a single file (exodus II format) that contains all results of the modeling efforts of the associated paper. This encompasses all structural information as well as the pore pressure, temperature, and fluid velocity distribution through time. We also supply all files necessary to rerun the simulation, resulting in the aforementioned output file. The model area covers a rectangular area around the Central European Basin System (Maystrenko et al., 2020). The data publication is compeiment to Frick et al., (2021). The file published here is based on the structural model after Maystrenko et al., (2020) which resolves 16 geological units. More details about the structure and how it was derived can be found in Maystrenko et al., (2020). The file presented contains information on the regional variation of the pore pressure, temperature and fluid velocity of the model area in 3D. This information is presented for 364 time steps starting from 43,000 years before present and ending at 310000 years after present. This model was created as part of the ESM project (Advanced Earth System Modelling Capacity; https://www.esm-project.net). This project looks at the development of a flexible framework for the effective coupling of Earth system model components. In this, we focused on the coupling between atmosphere and the subsurface by simulating the response of glacial loading, in terms of thermal and hydraulic forcing, on the hydrodynamics and thermics of the geological subsurface of Central Europe. For this endeavor, we populated the 3D structural model by Maystrenko and Coauthors (2020) with rock physical properties, applied a set of boundary conditions and simulated the transient 3D thermohydraulics of the subsurface. More details about this can be found in the accompanying paper (Frick et al., 2021)
This data publication contains mineralogical, geochemical and magnetic susceptibility data of an 87.2 m deep profile of hydrothermally altered plutonic rock in a semi-arid region of the Chilean Coastal Cordillera (Santa Gracia). The profile was recovered during a drilling campaign (March and April 2019) as part of the German Science Foundation (DFG) priority research program SPP-1803 “EarthShape: Earth Surface Shaping by Biota” which aims at understanding weathering of plutonic rock in dependency on different climatic conditions. The goal of the drilling campaign was to recover the entire weathering profile spanning from the surface to the weathering front and to investigate the weathering processes at depth. To this end, we used rock samples obtained by drilling and soil/saprolite samples from a manually dug 2 m deep soil pit next to the borehole. To elucidate the role of iron-bearing minerals for the weathering, we measured the magnetic susceptibility, determined the mineral content and analysed the geochemistry as well as the composition of Fe-bearing minerals (Mössbauer spectroscopy) in selected samples.
This dataset provides the grid files which were used to generate the 3d structural model for Berlin, capital city of Germany. It covers a rectangular area around the political boundaries of Berlin. Geologically the region is located in the Northeast German Basin which is in turn part of the Central European Basin System. The data publication is a compliment to the publications Frick et al., (2019) and Haacke et al., (2019) and resolves 23 geological units. These can be separated into eight Cenozoic, eight Mesozoic and three Paleozoic units, the upper and lower crust as well as the lithospheric mantle. We present files which show the regional variation in depth and thickness of all units in the form of regularly spaced grids where the grid spacing is 100 m. This model was created as part of the ongoing project Geothermal potential Berlin which was also partly situated in Energy Systems 2050, both of whom look at the evaluation of the local thermal field and the closely related geothermal potential. These are obtained by simulating fluid- and heatflow in 3d with numerical models built based on the data presented here. These numerical models and simulations rely heavily on a precise representation of the subsurface distribution of rock properties which are in turn linked to the different geological units. Hence, we integrated all available geological and geophysical data (see related work) into a consistent 3D structural model and will describe shortly how this was carried out (Methods). For further information the reader is referred to Frick et al., (2016) and Frick et al., (2019).
We provide a set of grid files that collectively allow recreating a 3D geological model which covers the Upper Rhine Graben and its adjacent tectonic domains, such as portions of the Swiss Alps, the Molasse Basin, the Black Forest and Vosges Mountains, the Rhenish Massif and the Lower Rhine Graben. The data publication is a complement to the publication of Freymark et al. (2017). Accordingly, the provided structural model consists of (i) 14 sedimentary and volcanic units; (ii) a crystalline crust composed of seven upper crustal units and a lower crustal unit; and (iii) two lithospheric mantle units. The files provided here include information on the regional variation of these geological units in terms of their depth and thickness, both attributes being allocated to regularly spaced grid nodes with horizontal spacing of 1 km. The model has originally been developed to obtain a basis for numerical simulations of heat transport, to calculate the lithospheric-scale conductive thermal field and assess the related geothermal potentials, in particular for the Upper Rhine Graben (a region especially well-suited for geothermal energy exploitation). Since such simulations require the subsurface variation of physical rock properties to be defined, the 3D model differentiates units of contrasting materials, i.e. rock types. On that account, a large number of geological and geophysical data have been analysed (see Related Work) and we shortly describe here how they have been integrated into a consistent 3D model (Methods). For further information on the data usage and the characteristics of the units (e.g., lithology, density, thermal properties), the reader is referred to the original article (Freymark et al., 2017). The contents and structure of the grid files provided herewith are described in the Technical Info section.
| Origin | Count |
|---|---|
| Wissenschaft | 8 |
| Type | Count |
|---|---|
| unbekannt | 8 |
| License | Count |
|---|---|
| offen | 8 |
| Language | Count |
|---|---|
| Englisch | 8 |
| Resource type | Count |
|---|---|
| Keine | 8 |
| Topic | Count |
|---|---|
| Boden | 8 |
| Lebewesen & Lebensräume | 5 |
| Luft | 2 |
| Mensch & Umwelt | 8 |
| Wasser | 3 |
| Weitere | 8 |