Other language confidence: 0.8563715520775884
<span>Der Web-Map-Service (WMS) für die Ostsee umfasst von der Bundesanstalt für Wasserbau erstellte digitale Geländemodelle. Die im Dienst eingebundenen Datensätze werden mit ihren Metadaten und DOI im BAW-Datenrepository beschrieben. Produkte: - GeoTiff zur Darstellung erstellt aus dem DGM (Digitales Geländemodell) der Trave: dgm_trave_2023 https://doi.org/10.48437/0bda38-efde51</span>
Die Karte oberflächennaher Rohstoffe 1:200.000 (KOR 200) ist ein Kartenwerk, das gemeinsam von der Bundesanstalt für Geowissenschaften und Rohstoffe und den Staatlichen Geologischen Diensten der Länder (SGD) im Auftrag des Bundesministers für Wirtschaft und Arbeit auf Beschluss der Länderwirtschaftsminister vom 22. Juni 1984 erarbeitet wird. Das Kartenwerk folgt dem Blattschnitt der topographischen Übersichtskarte 1:200.000 (TÜK 200) und besteht aus 55 Kartenblättern mit jeweils einem Erläuterungsheft. Es erfolgt eine Bestandsaufnahme, Beschreibung, Darstellung und Dokumentation der Vorkommen und Lagerstätten von mineralischen Rohstoffe, die üblicherweise im Tagebau bzw. an oder nahe der Erdoberfläche gewonnen werden. Im Besonderen sind dies Industrieminerale, Steine und Erden, Torfe, Braunkohle, Ölschiefer und Solen. Die Darstellung der oberflächennahen Rohstoffe und die zusätzlichen schriftlichen Informationen sind für die Erarbeitung überregionaler, bundesweiter Planungsunterlagen, die die Nutzung oberflächennaher mineralischer Rohstoffe berühren, unentbehrlich. Auf der Karte sind neben den umgrenzten, je nach Rohstoff farblich unterschiedlich dargestellten Lagerstätten- bzw. Rohstoffflächen "Abbaustellen" (=Betriebe) bzw. "Schwerpunkte mehrerer Abbaustellen" mit je einem Symbol dargestellt. Die Eintragungen in der Karte werden ergänzt durch Texterläuterungen. Die Erläuterungsbände haben üblicherweise einen Umfang von 40 - 80 Seiten und sind derzeit nur in der gedruckten Ausgabe der Karte verfügbar. Der Text ist gegliedert in: - Einführung - Beschreibung der Lagerstätten und Vorkommen nutzbarer Gesteine - Rohstoffwirtschaftliche Bewertung der Lagerstätten und Vorkommen oberflächennaher Rohstoffe im Blattgebiet - Verwertungsmöglichkeiten der im Blattgebiet vorkommenden nutzbaren Gesteine - Schriftenverzeichnis - Anhang (u. a. mit Generallegende und Blattübersicht) Die KOR 200 stellt somit die Rohstoffpotentiale in Deutschland in bundesweit vergleichbarer Weise dar und liefert eine Grundlage für künftige Such- und Erkundungsarbeiten sowie einen Beitrag zur Sicherung der Rohstoffversorgung.
Data presented here were collected between September 2022 to July 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Local tide and wave conditions were recorded with a RBRduo TDǀwave sensor (RBR Ltd., Ontario/Canada). The sensor was bottom mounted in a shallow tidal creek (0.77 m NHN) through a steel girder (buried 0.3m deep in the sediment) and was positioned 10 cm above sediment surface, as was determined by using a portable differential GPS. This resulted in the sensor falling dry during low tide. For accurate depth calculations, raw pressure data were manually corrected for atmospheric pressure derived from a locally installed weather station. The sensor was pre-calibrated by the manufacturer and the sampling rate was 3 Hz with 1024 samples per burst at a sample interval of 10 min. Recorded data were internally logged until the readout with the Ruskin (V1.13.13) software. Date and time is given in UTC. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, and (c) visually checks. Low-tide data is not removed, but were easily identified through the manually calculated water depth data, where all depths < 0.05m represented low tide data.
Die Trave ist ein Fluss, der bei Travemünde in die Ostsee mündet. Er dient als Zufahrt für Seeschiffe zu den Häfen der Hansestadt Lübeck. Der Datensatz enthält, in 8 Teilgebiete aufgeteilt, ein aus Vermessungsdaten abgeleitetes, hochauflösendes Höhenmodell (Digitales Geländemodell, DGM) des Gewässerbettes der Untertrave von Travemünde bis Lübeck und des anschließenden Nahbereichs der Lübecker Bucht, sowie der Kanaltrave bis Lübeck-Moisling. Das Geländemodell wurde aus verfügbaren Peildaten (Echolotungen) des Bundesamtes für Seeschifffahrt und Hydrographie, des Wasserstraßen- und Schiffahrtsamtes Ostsee und der Lübeck Port Authority nach folgenden Kriterien interpoliert: - bessere Information ersetzt ggf. Information mit schlechterer räumlicher Auflösung oder Qualität - neuere Information ersetzt ältere Information gleichwertiger Qualität Die Daten mit räumlich gröberer Auflösung wurden zunächst chronologisch aufsteigend gerastert und anschließend mittels Triangulation und Glättung interpoliert. Danach wurden die hochauflösenden, flächendeckenden Datensätze ebenfalls chronologisch aufsteigend aufgeprägt. Der Zeitraum der eingeflossenen Echolotdaten umfasst die Jahre 1991 bis 2023.
Data presented here were collected between January 2020 to December 2020 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Local tide and wave conditions were recorded with a RBRduo TDǀwave sensor (RBR Ltd., Ontario/Canada). The sensor was bottom mounted in a shallow tidal creek (0.78 m NHN) through a steel girder (buried 0.3m deep in the sediment) and was positioned 10 cm above sediment surface, as was determined by using a portable differential GPS. This resulted in the sensor falling dry during low tide. For accurate depth calculations, raw pressure data were manually corrected for atmospheric pressure derived from a locally installed weather station. The sensor was pre-calibrated by the manufacturer and the sampling rate was 3 Hz with 1024 samples per burst at a sample interval of 10 min. Recorded data were internally logged until the readout with the Ruskin (V1.13.13) software. Date and time is given in UTC. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, and (c) visually checks. Low-tide data is not removed, but were easily identified through the manually calculated water depth data, where all depths < 0.05m represented low tide data.
Data presented here were collected between January 2019 to December 2019 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Local tide and wave conditions were recorded with a RBRduo TDǀwave sensor (RBR Ltd., Ontario/Canada). The sensor was bottom mounted in a shallow tidal creek (0.78 m NHN) through a steel girder (buried 0.3m deep in the sediment) and was positioned 10 cm above sediment surface, as was determined by using a portable differential GPS. This resulted in the sensor falling dry during low tide. For accurate depth calculations, raw pressure data were manually corrected for atmospheric pressure derived from a locally installed weather station. The sensor was pre-calibrated by the manufacturer and the sampling rate was 3 Hz with 1024 samples per burst at a sample interval of 10 min. Recorded data were internally logged until the readout with the Ruskin (V1.13.13) software. Date and time is given in UTC. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, and (c) visually checks. Low-tide data is not removed, but were easily identified through the manually calculated water depth data, where all depths < 0.05m represented low tide data.
Data presented here were collected between January 2021 to October 2021 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Local tide and wave conditions were recorded with a RBRduo TDǀwave sensor (RBR Ltd., Ontario/Canada). The sensor was bottom mounted in a shallow tidal creek (0.78 m NHN) through a steel girder (buried 0.3m deep in the sediment) and was positioned 10 cm above sediment surface, as was determined by using a portable differential GPS. This resulted in the sensor falling dry during low tide. For accurate depth calculations, raw pressure data were manually corrected for atmospheric pressure derived from a locally installed weather station. The sensor was pre-calibrated by the manufacturer and the sampling rate was 3 Hz with 1024 samples per burst at a sample interval of 10 min. Recorded data were internally logged until the readout with the Ruskin (V1.13.13) software. Date and time is given in UTC. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, and (c) visually checks. Low-tide data is not removed, but were easily identified through the manually calculated water depth data, where all depths < 0.05m represented low tide data.
Data presented here were collected between April 2017 to December 2018 within the BEFmate project (Biodiversity - Ecosystem Functioning across marine and terrestrial ecosystems, https://uol.de/icbm/verbundprojekte/abgeschlossene-projekte/befmate/ ) of the Universities of Oldenburg and Göttingen and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Local tide and wave conditions were recorded with a RBRduo TDǀwave sensor (RBR Ltd., Ontario/Canada). The sensor was bottom mounted in a shallow tidal creek (0.71 / 0.78 m NHN) through a steel girder (buried 0.3m deep in the sediment) and was positioned 10 cm above sediment surface, as was determined by using a portable differential GPS. This resulted in the sensor falling dry during low tide. For accurate depth calculations, raw pressure data were manually corrected for atmospheric pressure derived from a locally installed weather station. The sensor was pre-calibrated by the manufacturer and the sampling rate was 3 Hz with 1024 samples per burst at a sample interval of 10 min. Recorded data were internally logged until the readout with the Ruskin (V1.13.13) software. Date and time is given in UTC. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, and (c) visually checks. Low-tide data is not removed, but were easily identified through the manually calculated water depth data, where all depths < 0.05m represented low tide data.
<span> Der Web-Coverage-Service (WCS) für die Ostsee umfasst von der Bundesanstalt für Wasserbau erstellte digitale Geländemodelle. Die im Dienst eingebundenen Datensätze werden mit ihren Metadaten und DOI im BAW-Datenrepository beschrieben. Produkt: - GeoTiff zur Darstellung erstellt aus dem DGM (Digitales Geländemodell) der Trave: dgm_trave_2023 https://doi.org/10.48437/0bda38-efde51 </span> Erläuterung zum Fachbezug: WCS Service
| Organisation | Count |
|---|---|
| Bund | 30 |
| Europa | 2 |
| Land | 1 |
| Wissenschaft | 68 |
| Type | Count |
|---|---|
| Daten und Messstellen | 59 |
| Förderprogramm | 26 |
| unbekannt | 4 |
| License | Count |
|---|---|
| Geschlossen | 1 |
| Offen | 86 |
| Unbekannt | 2 |
| Language | Count |
|---|---|
| Deutsch | 27 |
| Englisch | 65 |
| Resource type | Count |
|---|---|
| Archiv | 6 |
| Datei | 55 |
| Dokument | 1 |
| Keine | 25 |
| Webdienst | 3 |
| Webseite | 4 |
| Topic | Count |
|---|---|
| Boden | 52 |
| Lebewesen und Lebensräume | 87 |
| Luft | 43 |
| Mensch und Umwelt | 89 |
| Wasser | 82 |
| Weitere | 89 |