API src

Found 39 results.

Other language confidence: 0.7878248079786954

Ring-shear test data of quartz sand SIBELCO S80 used for analogue modelling in the Tectonic Laboratory (TecLab) at Utrecht University

This dataset provides friction data from ring-shear tests on quartz sand SIBELCO S80 used in analogue modelling of tectonic processes as a rock analogue for the earth’s upper crust (e.g., Klinkmüller et al., 2016). According to our analysis the material shows a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of quartz sand S80 are µP = 0.75, µD = 0.59, and µR = 0.69, respectively (Table 5). Cohesion of the material ranges between 0-80 Pa. The material shows no rate-dependency (<1% per ten-fold change in shear velocity v). The tested bulk material consists of quartz sand SIBELCO S80 with grain size of ~0.63-355 µm (D50 = 175 µm. Bulk and grain densities are 1300 kg/m³ and 2650 kg/m³, respectively and the hardness is 7 on Moh’s scale. S80 is sold e.g., by the company SIBELCO (sibelco.com).

Ring-shear test data of colored quartz sand used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing)

This dataset provides friction data from ring-shear tests colored quartz sand used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing). According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of corundum sand are µP = 0.75, µD = 0.59, and µR = 0.67, respectively (Table 5). Cohesion of the material ranges between 20-90 Pa. The tested bulk material consists of blue colored quartz sand with grain size of 180-380 µm and is sold under the name "Colored Sand" with the product number A1 by the company Xinran Mineral Products (1688.com). The data presented here are derived by ring shear testing using a SCHULZE RST-01.pc (Schulze, 1994, 2003, 2008) at HelTec, the Laboratory for experimental tectonics at the Helmholtz Center Potsdam – GFZ German Research Centre for Geosciences in Potsdam, Germany. The RST is specially designed to measure friction coefficients µ and cohesions C in loose granular material accurately at low confining pressures (<20 kPa) and shear velocities (<1 mm/sec) similar to sandbox experi-ments. In this tester, a granular bulk material layer is sheared internally at constant normal stress σN and shear velocity v while shear force and lid displacement (corresponding to density and vol-ume change ΔV) are measured continuously. For more details see Klinkmüller et al. (2016).

Ring-shear test data of white mica used for analogue modelling in the Tectonic Laboratory (TecLab) at Utrecht University

This dataset provides friction data from ring-shear tests white mica (Muscovite) used for analogue modelling in the Tectonic Laboratory (TecLab) at Utrecht University. According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of white mica sand are µP = 0.60, µD = 0.56, and µR = 0.55, respectively (Table 5). Cohesion of the material ranges between 140-180 Pa. The tested bulk material consists of white mica (Muscovite) with grain sizes ranging from 45-600 µm with the following distribution: 45-106µm – 10-25%, 106-425µm – 65-85%, 425-600µm – <2.5%.

Granular Healing - Python module associated to the 2022 GeoMod material benchmark

The software is provided as an executable python module. The software automatically analyzes the files present in the data publication. The results are saved in the form of the images presented in the main publication. Each figure is implemented as a dedicated function that first loads the necessary data, then does some processing steps, such as curve fitting, and then plots the outputs in the desired layout. A 'main' function calls all figure functions sequentially. However, the packages is modular so that each individual plot has a standalone function which could be used with other, similarly structured data. Several submodules provide additional data for plotting, e.g. the 'groups' submodule that contains naming schemes and the densities for all samples.

Ring shear test data of glass beads 40-70 µm used for analogue experiments in the Helmholtz Laboratory for Tectonic Modelling (HelTec) at the GFZ German Research Centre for Geosciences in Potsdam

This dataset provides friction data from ring-shear tests (RST) on glass beads used in the Helmholtz Laboratory for Tectonic Modelling (HelTec) at the GFZ German Research Centre for Geosciences in Potsdam as an analogue for “weak” brittle layers in the crust or lithosphere (Ritter et al., 2016; Santimano et al., 2015; Contardo et al., 2011; Reiter et al., 2011; Hoth et al., 2007, 2006; Kenkmann et al., 2007; Deng et al., 2018) or in stick-slip experiments (Rudolf et al., 2019). The glass beads with a diameter of 40-70 µm have been characterized by means of internal friction coefficients µ and cohesions C as a remote service by the Helmholtz Laboratory for Tectonic Modelling (HelTec) at the GFZ German Research Centre for Geosciences in Potsdam. According to our analysis the material shows a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of the glass beads are µP = 0.46, µD = 0.40 and µR = 0.44, respectively. Cohesion ranges between 33 and 42 Pa. A rate-weakening of ~3 % per ten-fold change in shear velocity v is evident.

Ring-shear test data of wallnut shells used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing))

This dataset provides friction data from ring-shear tests walnut shells used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing). According to our analysis the tested materials behave as a Mohr-Coulomb material characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of corundum sand are µP = 0.90, µD = 0.63, and µR = 0.68, respectively (Table 4). Cohesion of the material ranges between 0-40 Pa. The tested bulk material consists of walnut shells with grain size of 180-380 µm (Table 1) and is sold under the name "Walnut Shells" with the product number YR-98547 by the company Yiran Mineral Products (1688.com). The data presented here are derived by ring shear testing using a SCHULZE RST-01.pc (Schulze, 1994, 2003, 2008) at HelTec, the Laboratory for experimental tectonics at the Helmholtz Center Potsdam – GFZ German Research Centre for Geosciences in Potsdam, Germany. The RST is specially designed to measure friction coefficients µ and cohesions C in loose granular material accurately at low confining pressures (<20 kPa) and shear velocities (<1 mm/sec) similar to sandbox experiments. In this tester, a granular bulk material layer is sheared internally at constant normal stress σN and shear velocity v while shear force and lid displacement (corresponding to density and volume change ΔV) are measured continuously. For more details see Klinkmüller et al. (2016).

Ring-shear test data of foamglass used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing)

This dataset provides friction data from ring-shear tests foamglass used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing). According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of corundum sand are µP = 0.55, µD = 0.52, and µR = 0.57, respectively (Table 4). Cohesion of the material ranges between 10-30 Pa. The tested bulk material consists of foamglass with grain size of 180-380 µm (Table 1) and is sold under the name "Floating Bead" with the product number PZ-002 by the company Tuyun Mineral Products (1688.com). The data presented here are derived by ring shear testing using a SCHULZE RST-01.pc (Schulze, 1994, 2003, 2008) at HelTec, the Laboratory for experimental tectonics at the Helmholtz Center Potsdam – GFZ German Research Centre for Geosciences in Potsdam, Germany. The RST is specially designed to measure friction coefficients µ and cohesions C in loose granular material accurately at low confining pressures (<20 kPa) and shear velocities (<1 mm/sec) similar to sandbox experiments. In this tester, a granular bulk material layer is sheared internally at constant normal stress σN and shear velocity v while shear force and lid displacement (corresponding to density and volume change ΔV) are measured continuously. For more details see Klinkmüller et al. (2016).

Ring-shear test data of mica used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing)

This dataset provides friction data from ring-shear tests black mica used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing). According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of corundum sand are µP = 0.59, µD = 0.56, and µR = 0.57, respectively (Table 4). Cohesion of the material ranges between 100-130 Pa. The tested bulk material consists of black mica (Biotite) with grain size of 380-830 µm and is sold under the name "Black Mica" with the product number YS-004 by the company Yunshi Building Materials Co., Ltd (1688.com). The data presented here are derived by ring shear testing using a SCHULZE RST-01.pc (Schulze, 1994, 2003, 2008) at HelTec, the Laboratory for experimental tectonics at the Helmholtz Center Potsdam – GFZ German Research Centre for Geosciences in Potsdam, Germany. The RST is specially designed to measure friction coefficients µ and cohesions C in loose granular material accurately at low confining pressures (<20 kPa) and shear velocities (<1 mm/sec) similar to sandbox experiments. In this tester, a granular bulk material layer is sheared internally at constant normal stress σN and shear velocity v while shear force and lid displacement (corresponding to density and volume change ΔV) are measured continuously. For more details see Klinkmüller et al. (2016).

Ring-shear test data of quartz sand – silicate cenospheres mixtures used for analogue experiments at the Institute of Geophysics of the Czech Academy of Science, Prague

This dataset provides friction data from ring-shear tests (RST) for mixtures of quartz sand and sili-cate cenospheres, which are used for analog experiments in the laboratory of the Institute of Geo-physics of the Czech Academy of Science (IG CAS) (Warsitzka et al., 2021). The mixtures have been characterized by means of internal friction coefficients µ and cohesion C as a remote service by the Helmholtz Laboratory for Tectonic Modelling (HelTec) at the GFZ German Research Centre for Geosciences in Potsdam. According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak friction coefficients µP of the tested materials range between 0.55 and 0.75, dynamic friction coefficients µD between 0.47 and 0.60 and reactivation friction coefficients µR be-tween 0.52 and 0.65. Cohesions of the materials vary between 20 and 120 Pa. The materials show a minor rate-weakening of <1.2% per ten-fold change in shear velocity v.

Ring-shear test data of wheat flour used for analogue experiments in the laboratory of the Institute of Geophysics of the Czech Academy of Science, Prague

This dataset provides friction data from ring-shear tests (RST) for wheat flour used as a fine-grained, cohesive analogue material for simulating brittle upper crustal rocks in the analogue labor-atory of the Institute of Geophysics of the Czech Academy of Science (IGCAS). It is characterized by means of internal friction coefficients µ and cohesion C. According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak friction coefficients µP of the tested material is ~0.72, dynamic friction coeffi-cients µD is ~0.67 and reactivation friction coefficients µR is ~0.70. Cohesions of the material range between 27 and 50 Pa. The material shows a minor rate-weakening of ~1.5% per ten-fold change in shear velocity v and a stick-slip behaviour at low shear velocities.

1 2 3 4