Der WFS-Dienst Hintergrundwerte von Böden liefert die beiden Layer "Hintergrundwerte Anorganik" und "Hintergrundwerte Organik". Der erste Layer "Hintergrundwerte Anorganik" enthält die aggregierten Leitsubstrate der Bodenbildung. Die Leitsubstrate dienen zur Zusammenfassung der Böden nach ihrem Ausgangsgestein bei der Berechnung von Hintergrundwerten für anorganische Stoffe. Für die Auswertung der Hintergrundwerte Anorganik wurden Analysedaten für 16 Elemente von ca. 19.000 Standorten mit bis zu 40.000 Proben aus dem Fachinformationssystem Boden herangezogen. Der zweite Layer "Hintergrundwerte Organik" basiert auf der Karte der Raumkategorien für den Landesentwicklungsplan (LEP) von 2013. Dieser teilt Sachsen in drei Raumkategorien ein, welche die Grundage für die Berechnung von Hintergrundwerten für organische Stoffe bilden. Die Leitsubstrate dienen zur Zusammenfassung der Böden. Für die Auswertung der Hintergrundwerte wurden je nach Stoff Analysedaten aus dem Fachinformationssystem Boden von bis zu 2.300 Proben an 2.200 Standorten für 10 Einzelstoffe bzw. Stoffgruppen herangezogen.
Das ICP-Forests-Programm agiert im Rahmen des UNECE-Übereinkommens über weiträumige grenzüberschreitende Luftverunreinigungen (Genfer Luftreinhaltekonvention, CLRTAP). Das Level-II-Monitoring ergänzt seit 1995 das Level-I-Monitoring. Hier werden Daten über Baumwachstum, Bodenvegetation, Bodenlösung, Bodenfestphase, nasse Deposition, Luftqualität, meteorologische Parameter, Phänologie, Streufall, Nadel- / Blattanalysen und sichtbare Ozonschäden erhoben, die umfänglich und hinsichtlich ihrer zeitlichen Auflösung weit über den Erhebungsrahmen des extensiven Waldmonitorings (Level I) hinausgehen. Die Daten werden in Deutschland auf ca. 50 - 90 Plots (Anzahl variiert je nach Parameter) erhoben. Verteilung Probenahmestandorte: Verteilung systematisch, so dass die Hauptwaldtypen Europas repräsentiert sind (kein Raster) Probenahmemethode: Die Probenahme für chemische Analysen erfolgt grundsätzlich nach Tiefenstufen. Satellitenbeprobung im Radius von 25 m mit einem inneren intensiver zu beprobenden Radius von 3 m. Für alle anderen Erhebungen ausführliche Angaben im ICP-Forests-Manual: https://www.icp-forests.net/monitoring-and-research/icp-forests-manual Entnahmetiefen: 0 bis 10 cm 20 bis 40 cm 40 bis 80 cm Untersuchungsmethode: Analysemethoden sind einheitlich festgelegt im ICP-Forests-Manual (s.o.). Untersuchungshäufigkeit: - bodenchemische Parameter alle 10 Jahre - Boden-Lösung fortlaufend - Blattnährstoffgehalte alle 2 Jahre - Baumdurchmesser und -höhen alle 5 Jahre - Boden-Vegetation mindestens alle 5 Jahre - atmosphärische Deposition fortlaufend - Bedingungen der Umgebungsluft fortlaufend - meteorologische Parameter fortlaufend - Phänologie mehrmals pro Jahr - Streufall fortlaufend - sichtbare Ozonschäden einmal pro Jahr - Kronenzustand jährlich Arbeitsgruppen / Gremien: - Expert Panel on soil and soils solution - Forest Soil Coordination Centre - Expert Panel on foliage and litterfall - Forest Foliar Coordinating Centre - Expert Panel on forest growth - Expert Panel on deposition - Working Group on ambient air quality - Expert Panel on crown condition - Ad hoc group on assessment of biotic damage causes - Expert panel on meteorology and phenology - Expert panel on biodiversity and ground vegetation - Quality Assurance Committee - Project Coordinating Group (PCG) - Scientific Advisory Group (SAG)
This digital elevation model (DEM) describes the topography of the active floodplain of the middle reaches of River Elbe between the Czech-German border near Schmilka and the weir in Geesthacht with 1 m spatial resolution in coordinate reference system "ETRS 1989 UTM Zone 33 N" and 0.01 m resolution in the German height reference system "Deutsches Haupthöhennetz 1992 (DHHN92)". The dataset was generated through aerial laser scanning (ALS) for terrestrial parts of the floodplain between April 2003 and December 2006 and echo sounding for aquatic parts of the central water course by the local waterway and navigation authorities (WSV) throughout the year 2006. Parts not covered by any of the two data collection methods were filled through linear interpolation. A comparison between DEM and 7476 height reference points confirmed a high accuracy with a mean deviation of elevations of ± 5 cm. Depending on the data source 95% of all checked points show a vertical deviation of less than 15 cm to 50 cm. A small section of the model was updated later to incorporate the dike relocation area Lenzen which became connected to the floodplain in 2011 so that the dataset describes the state of 2011. Since the dataset has a large volume it was split into 49 tiles.
The IUKD01 TTAAii Data Designators decode as: T1 (I): Observational data (Binary coded) - BUFR T1T2 (IU): Upper air T1T2A1 (IUK): Radio soundings from fixed land stations (up to 100 hPa) A2 (D): 90°E - 0° northern hemisphere(The bulletin collects reports from stations: 10035;Schleswig;) (Remarks from Volume-C: high resolution 2 sec.)
The IUKD04 TTAAii Data Designators decode as: T1 (I): Observational data (Binary coded) - BUFR T1T2 (IU): Upper air T1T2A1 (IUK): Radio soundings from fixed land stations (up to 100 hPa) A2 (D): 90°E - 0° northern hemisphere(The bulletin collects reports from stations: 10393;Lindenberg;) (Remarks from Volume-C: high resolution 2 sec.)
The IUSD01 TTAAii Data Designators decode as: T1 (I): Observational data (Binary coded) - BUFR T1T2 (IU): Upper air T1T2A1 (IUS): Radiosondes/pibal reports from fixed land stations (entire sounding) A2 (D): 90°E - 0° northern hemisphere(The bulletin collects reports from stations: 10035;Schleswig;) (Remarks from Volume-C: high resolution 2 sec.)
Multibeam bathymetry processed data (KONGSBERG EM712 multibeam echosounder) was collected onboard RV HEINCKE during cruise HE622 in the German North Sea (2023-06-06 - 2023-06-20) at 'Tiefe Rinne' at Helgoland. The raw data (.all format) were processed using QPS Qimera software (v 1.7), based on the following workflow: 0.Raw data > 1.Apply correct Sound Velocity Profiles -> 2.Create dynamic surface (shallow Mode) -> 3.Apply Spline Filter (Medium/Weak) > 4. Finalize with manual 2D and 3D editing, -> 5.Export in GeoTIFF format and projected in the UTM32N coordinate system (EPSG:32632). The bathymetry dataset here is gridded at 2 m resolution. The data products were created in the context of the DAM (German Marine Research Alliance), CONMAR research project.
The IUKD09 TTAAii Data Designators decode as: T1 (I): Observational data (Binary coded) - BUFR T1T2 (IU): Upper air T1T2A1 (IUK): Radio soundings from fixed land stations (up to 100 hPa) A2 (D): 90°E - 0° northern hemisphere(The bulletin collects reports from stations: 10962;Hohenpeißenberg;) (Remarks from Volume-C: high resolution 2 sec.,if available)
The USDL03 TTAAii Data Designators decode as: T1 (U): Upper air data T1T2 (US): Upper level pressure, temperature, humidity and wind (Part A) A1A2 (DL): Germany (The bulletin collects reports from stations: 10238;Bergen;10618;Idar-Oberstein;10771;Kümmersbruck;)
The USDL40 TTAAii Data Designators decode as: T1 (U): Upper air data T1T2 (US): Upper level pressure, temperature, humidity and wind (Part A) A1A2 (DL): Germany (The bulletin collects reports from stations: 10962;Hohenpeißenberg;) (Remarks from Volume-C: XXX)
| Organisation | Count |
|---|---|
| Bund | 180 |
| Kommune | 2 |
| Land | 748 |
| Weitere | 1 |
| Wirtschaft | 1 |
| Wissenschaft | 74 |
| Zivilgesellschaft | 1 |
| Type | Count |
|---|---|
| Chemische Verbindung | 4 |
| Daten und Messstellen | 658 |
| Förderprogramm | 67 |
| Gesetzestext | 1 |
| Hochwertiger Datensatz | 2 |
| Text | 2 |
| unbekannt | 129 |
| License | Count |
|---|---|
| Geschlossen | 548 |
| Offen | 238 |
| Unbekannt | 77 |
| Language | Count |
|---|---|
| Deutsch | 755 |
| Englisch | 651 |
| Resource type | Count |
|---|---|
| Archiv | 2 |
| Datei | 34 |
| Dokument | 135 |
| Keine | 621 |
| Webseite | 204 |
| Topic | Count |
|---|---|
| Boden | 808 |
| Lebewesen und Lebensräume | 831 |
| Luft | 794 |
| Mensch und Umwelt | 859 |
| Wasser | 746 |
| Weitere | 862 |