Other language confidence: 0.9268818309684678
This earthquake catalog was constructed using a combination of artificial intelligence and traditional methods for phase picking, phase association, and earthquake relocation. It covers the period from January 1, 2017, to February 5, 2023—one day prior to the Mw 7.8 earthquake that struck Türkiye. The dataset includes three subsets: 1) Raw Catalog: Comprises 14,128 events obtained from the full association and relocation process, without filtering based on event type or location quality. 2) Earthquake Catalog: Comprises 5,721 tectonic events with well-constrained hypocenters (68% confidence ellipsoid semi-major axis < 8 km and depth < 15 km). 3) Anthropogenic Catalog: Comprises 1,695 human-induced events, primarily quarry blasts, also with well-constrained hypocenters (68% confidence ellipsoid semi-major axis < 8 km and depth < 15 km).
This data publication supports the manuscript “Controls on Valley-Floor Width in the Western Andes” by Tofelde et al. (2026). The aim of the associated study is to quantify and compare the relative influence of four key factors—river discharge, tectonic uplift, bedrock strength, and lateral sediment supply from adja-cent hillslopes—on the width of valley floors. Valley-floor width was systematically measured at more than 126,000 locations across 84 catch-ments spanning the western Andes between 5°S and 40°S. To represent the four hypothesized controls, eleven proxy variables were developed and analyzed (see Table 1 in the main manuscript). Valley-floor width was quantified using the approach of Clubb et al. (2022) implemented in the topography analysis software LSDTopoTools (Mudd et al., 2023). River steepness index (Wobus et al., 2006), a proxy for tectonic uplift, was also calculated in LSDTopoTools. All remaining proxies were quantified using the topography analysis software TopoToolbox (Schwanghart & Kuhn, 2010; Schwanghart & Scherler, 2014) implemented in Matlab with the script Valley_floor_analysis.m pro-vided here. This script reproduces the datasets used in the study and allows to apply the approach to new locations.
This dataset comprises discharge values for all flood events at 516 river gauges across Germany, generated using our perfect storm method. The discharge data were simulated with the mesoscale hydrological model (mHM). In total, the dataset includes 120 scenarios: 110 recombined events and 10 original flood events.
The GEOROC database includes helpful compilations of mineral compositions aggregated from measurements reported in decades worth of publications, but it can be challenging to consistently filter mislabeled, inaccurate, or incomplete mineral compositions. MIST (Mineral Identification by Stoichiometry) is a stoichiometry-based computational algorithm that identifies geochemical observations with normalized elemental ratios matching natural minerals. The stoichiometric filters that were manually coded in MIST for over 240 mineral species are based on reported mineral formulas and well-documented examples of mineral chemistry reported in RRUFF and associated databases, typically including a ~5-10% tolerance in stoichiometric ratios based on measurement errors, vacancies, and substitutions. The MIST model can therefore efficiently filter the GEOROC mineral compilation files to recognize compositions whose normalized oxides match the labeled mineral stoichiometry. Furthermore, the MIST output includes results of intermediate data manipulation steps, a detailed stoichiometric formula for each input composition, and consistently calculated mineral endmembers such as Fo, En, Ws, and Fs. MIST is agnostic to the instrument used to collect oxide data. Because MIST uses normalized oxides, it cannot distinguish between some mineral species, where applicable, they are reported as a group (e.g., gypsum/bassanite/anhydrite). MIST can only recognize minerals encoded in the algorithm, so other real but less common minerals will not be recognized. The full list of minerals MIST can recognize, along with more details of the algorithm and results pages, are published in Siebach et al. (https://doi.org/10.1016/j.cageo.2025.106021). This dataset includes fifteen of the Compiled Mineral files published by GEOROC in 12-2024 including the MIST results (whether or not a species was confirmed by MIST). Prior to running the data through MIST, all files were filtered to only include mineral compositions that included major oxides (e.g., silicate mineral compositions where SiO2 > 0 wt%). Furthermore, all variations of reported Fe were collapsed into a single column representing FeOT. Metadata is preserved from the original compiled GEOROC files, so users may add additional filters as appropriate for different purposes. Results have not been filtered for reported sum of total oxides, but doing so can help identify particular mineral species (e.g., separate gypsum from bassanite). An additional file preserves the full reference information for each mineral compilation. We suggest using the compositions that MIST identifies as stoichiometrically consistent with a mineral species as a standardized filter on the GEOROC datasets prior to utilizing the data in machine learning models or similar applications. These may also be helpful any time a user would like standardized formulas or mineral endmember information for these mineral compilations.
This dataset provides point-shapefiles and geotiffs, related to the figures presented in (Frick et al., 2022a, 2022b). It covers most of northern Germany, with the boundaries defined by the extent of the North German Basin, which is part of the Central European Basin System. The files contain information on the depth (m.b.s. = meter below surface), thickness, temperature, heat in place and heat storage potential of selected geological units and the formations therein. These data are an addendum to the data presented in (Frick et al., 2022a, 2022b), resolving 5 geological units and 9 formations. The data are presented as regularly spaced point-shapefiles, with a spacing of 1000 m. The data were produced as part of the Helmholtz Climate Initiative (HICAM), which focuses on Net Zero 2050 (mitigation) and Adapting to Extreme Events (adaptation). As part of this initiative, estimates of the heat in place and heat storage potential of the subsurface play an important part for mitigation of fossil fuel bound emissions as they pose a promising alternative (geothermal energy). The data presented here, therefore give an overview of areas which might be suited for geothermal applications in the different geothermal target units and formations. We integrated the recently published TUNB Model (BGR et al., 2021) as well as available borehole data, data from the Sandsteinfazies and GeoPoNDD projects (Franz et al., 2018, 2015) and temperature data from two models (Agemar et al., 2014; Frick et al., 2021) the process of which will be described in the following.
This dataset shows the original data of a series of enhanced-gravity (centrifuge) analogue models, which were performed to test the influence of the pre-existing fabrics in the brittle upper crust on the evolution of structures resulting from oblique rifting. The obliquity of the rift (i.e., the angle between the rift axis and the direction of extension) was kept constant at 30° in all the models. The main variable of this experimental series was the orientation of the pre-existing fabrics (indicated as the angle between the trend of the fabric and the orthogonal to extension), which varied from 0° to 90° (i.e., from orthogonal to parallel to the extension direction). The inherited discontinuities were reproduced by cutting with a knife through the top brittle layer of models. An overview of the experimental series is shown in Table 1. In this dataset, four different data types are provided for further analysis: 1) Top-view photos of model deformation, taken at different time intervals and showing the deformation process of each model; they can be used to interpret the geometrical characteristics of rift-related faults; 2) Digital Elevation Models (DEMs) used to reconstruct the 3D deformation of the analogue models, allowing for quantitative analysis of the fault pattern. 3) Movies of model deformation, built from top-view photos, which help to visualize the evolution of model deformation; 4) Faults line-drawings to be used for statistical quantification of rift-related structures. Further information on the modelling strategy and setup can be found in the publication associated to this dataset and in Corti (2012), Philippon et al. (2015), Maestrelli et al. (2020), Molnar et al. (2020), Zwaan et al. (2021), Zou et al. (2023). Materials used to perform these enhanced-gravity analogue models were described in Montanari et al. (2017), Del Ventisette et al. (2019) and Zwaan et al. (2020).
This dataset presents the raw data from one experimental series (named CCEX, i.e., Caldera Collapse under regional Extension) of analogue models performed to investigate the process of caldera collapse followed by regional extension. Our experimental series tested the case of perfectly circular collapsed calderas afterward stretched under regional extensional conditions, that resulted in elongated calderas. The models are primarily intended to quantify the role of regional extension on the elongation of collapsed calderas observed in extensional settings, such as the East African Rift System. An overview of the performed analogue models is provided in Table 1. Analogue models have been analysed quantitatively by means of photogrammetric reconstruction of Digital Elevation Model (DEM) used for 3D quantification of the deformation, and top-view photo analysis for qualitative descriptions. The analogue materials used in the setup of these models are described in Montanari et al. (2017), Del Ventisette et al. (2019), Bonini et al., 2021 and Maestrelli et al. (2021a,b).
The published data sets are derived from radio spectrum measurements at GFZ’s Satellite Receiving Station at Ny-Ålesund, Spitsbergen (station described in Falck et al., 2020). The engaged radio spectrum monitoring system was designed and installed by GFZ to support analysis, assessments and discussions on local usage of radio systems, radio interference issues and radio silence at Ny-Ålesund. Radio silence is an important topic (https://nyalesundresearch.no/research-and-monitoring/researchers-guide/using-radio-frequences/), in order to support and protect the operation of sensible instruments, especially the antennas at the local VLBI station (Very Long Baseline Interferometry). Transmissions at frequencies between 2 and 32 GHz are generally prohibited by Norwegian regulations in a 20 km radius around Ny-Ålesund (with exemptions for safety-relevant applications). This includes all kinds of Wifi/WLAN- and Bluetooth transmissions (2.4 GHz and 5.7 GHz band), both, from consumer electronics and scientific instruments. GFZ’s radio spectrum measurements started mid of September 2023 (commissioning phase) and entered full functionality on 11. October 2023. The monitoring system includes an easy-to-handle, graphical user interface (https://rsm.gfz.de, online since 1.October 2024) to display graphics from the measurement data, as processed by GFZ. Also, daily plots and raw data are available from the website for user-selectable days and antennas. We recommend to visit the website to become acquainted with the published data. This publication covers raw data (numerical, full resolution) and data processed by GFZ (graphical, lower resolution). The main components of the measurement system, the measurement procedures and the file structures of the published data are described in separate documents.
The Global Gravity-based Groundwater Product (G3P) provides groundwater storage anomalies (GWSA) from a cross-cutting combination of GRACE/GRACE-FO-based terrestrial water storage (TWS) and storage compartments of the water cycle (WSCs) that are part of the Copernicus portfolio. The data set comprises gridded anomalies of groundwater, TWS, and the WSCs glacier, snow, soil moisture and surface water bodies plus layers containing uncertainty information for the individual data products. All WSCs are spatially filtered with a Gaussian filter to be compatible with TWS. Spatial coverage is global, except Greenland and Antarctica, with 0.5-degree resolution. Temporal coverage is from April 2002 to September 2023 with monthly temporal resolution. Gridded data sets are available as NetCDF files containing variables for the parameter value as anomaly in mm equivalent water height and the parameter’s uncertainty as mm equivalent water height. The latest version of the data is visualized at the GravIS portal: https://gravis.gfz-potsdam.de/gws. From GravIS, the data is also available as area averages for several large river basins and aquifers, as well as for climatically similar regions. G3P was funded by the EU Horizon 2020 programme in response to the call LC-SPACE-04-EO-2019-2020 “Copernicus evolution – Research activities in support of cross-cutting applications between Copernicus services” under grant agreement No. 870353. --------------------------------------------------------------------------------------------- Version History: 10 March 2023: Release of Version v1.11. That version is the initial release of the data (Güntner et al., 2023; https://doi.org/10.5880/G3P.2023.001) 26 June 2024: Release of Version v1.12. Temporal coverage has been extended until September 2023.
This dataset presents the raw data from one experimental series (named CCEX, i.e., Caldera Collapse under regional Extension) of analogue models performed to investigate the process of caldera collapse followed by regional extension. Our experimental series tested the case of perfectly circular collapsed calderas afterward stretched under regional extensional conditions, that resulted in elongated calderas. The models are primarily intended to quantify the role of regional extension on the elongation of collapsed calderas observed in extensional settings, such as the East African Rift System. An overview of the performed analogue models is provided in Table 1. Analogue models have been analysed quantitatively by means of photogrammetric reconstruction of Digital Elevation Model (DEM) used for 3D quantification of the deformation, and top-view photo analysis for qualitative descriptions. The analogue materials used in the setup of these models are described in Montanari et al. (2017), Del Ventisette et al. (2019), Bonini et al., 2021 and Maestrelli et al. (2021a,b).
| Organisation | Count |
|---|---|
| Wissenschaft | 25 |
| Type | Count |
|---|---|
| unbekannt | 25 |
| License | Count |
|---|---|
| Offen | 25 |
| Language | Count |
|---|---|
| Englisch | 25 |
| Resource type | Count |
|---|---|
| Keine | 25 |
| Topic | Count |
|---|---|
| Boden | 20 |
| Lebewesen und Lebensräume | 16 |
| Luft | 8 |
| Mensch und Umwelt | 24 |
| Wasser | 10 |
| Weitere | 25 |