In this dataset we provide data for 6 experimental models of caldera collapse and subsequent resurgence monitored through geophysical sensors (a force or “impact sensor”, Piezotronics PCB 104 200B02 and a Triaxial piezoelectric accelerometer, Model 356B18). The analogue modelling experiments were carried out at the TOOLab (Tectonic Modelling Laboratory), which is a joint laboratory between the Istituto di Geoscienze e Georisorse of the Consiglio Nazionale delle Ricerche, Italy and the Department of Earth Sciences of the University of Florence. The laboratory work that produced these data was partly supported by the European Plate Observing System (EPOS), by the Joint Research Unit (JRU) EPOS Italia and by the “Monitoring Earth's Evolution and Tectonics” (MEET) project (NextGenerationEU). Specifically, this work was performed in the frame of the DynamiCal project, funded by the 2° TNA-NOA call of the ILGE-MEET project.
We implemented, by means of analogue laboratory modelling, the key processes of the feedback among erosion and landslides, isostatic response and lithospheric flexure, to address how these lead to landsliding. The processes involved have different response times and characteristic length-scales and/or threshold behaviours and are suitable to the investigation in scaled analogue experiment, which aptly capture the behaviour of the natural prototype. These processes have been simulated using sand, to simulate mountain slopes, erosion and landslides, and viscous solids, e.g., syrup and silicone, to simulate the underlying lithosphere and mantle. This approach combines established techniques, such as laboratory fluid-filled tanks reproducing deformation and restoring force of the Earth’s mantle, and silicone to reproduce the viscoelastic lithosphere dynamics, whereas sand is used to capture the plastic behaviour of slopes and landslides, while climate-driven precipitation is routinely simulated to address slope erosion. All the modelling techniques are well established, minimising the risk of the project. Combining these techniques into a single modelling approach is novel as it reliably captures the feedback between processes acting across vastly different spatial and temporal scales, so far addressed in isolation. This publication results from work conducted under the transnational access/national open access action at Laboratory of Experimental Tectonics (University of Roma TRE, Italy), supported by WP3 ILGE - MEET project, PNRR - EU Next Generation Europe program, MUR grant number D53C22001400005.
This dataset includes the results of Particle Image Velocimetry (PIV) of one experiment on subduction megathrust earthquakes (with interacting asperities) performed at the Laboratory of Experimental Tectonics (LET) Univ. Roma Tre in the framework of AspSync, the Marie Curie project (grant agreement 658034; https://aspsync.wordpress.com). Detailed descriptions of the experiments and monitoring techniques can be found in Corbi et al. (2017). This data set is from one experiment characterized by the presence of a 7 cm wide barrier separating two asperities with equal size, geometry and friction. Here we provide PIV data relative to a 16.3 min long interval during which the experiment produces 138 analog earthquakes with an average recurrence time of 7 s. The PIV analysis yields quantitative information about the velocity field characterizing two consecutive frames, measured in this case at the model surface. For a detailed description of the experimental procedure, set-up and materials used, please refer to the article of Corbi et al. (2017) paragraph 2. This data set has been used for: a) studying velocity variations (Fig. 2 in Corbi et al., 2021) and rupture patterns (Fig. 3a, b in Corbi et al., 2021) occurring during the velocity peak of one of the two asperities (aka trigger).
This data set includes various laboratory model data derived from analogue rock avalanche experiments on the role of fragmentation on runout behavior. Detailed descriptions of the experiments and monitoring and analysis techniques can be found in Haug et al. (submitted) to which this data set is supplementary. The data presented here consist of movies showing key avalanche experiments and kinematic data characterizing the runout behavior derived from 157 experiments.
This dataset contains digital image correlation (DIC) data of eight seismotectonic analogue experiments that were performed at the Laboratory of Experimental Tectonics (LET), Univ. Rome Tre, to investigate the effect of subduction interface roughness on the seismogenic behaviour of the megathrust. The study has been done in the framework of the Marie Sklodowska-Curie grant agreement 642029 – ITN CREEP. Together with DIC data we also provide analogue earthquake characteristics and Matlab scripts for visualization. Here we provide Digital Image Correlation data for eight experiments that last about 20 minutes (i.e., including tens of seismic cycles), of which four experiments include a smooth subduction interface and four a rough subduction interface. The DIC analysis provides a velocity field between two consecutive frames, measured at the surface of the model. Details about the nature and geometry of this interface, as well as the experimental procedure, model set-up and materials can be found in van Rijsingen et al. (2019), paragraph 2 and supporting information. A more detailed description of the data that we provide, the methods and the matlab scripts used for visualisation can be found in the data description file. An overview of the dataset can be found in the list of files.
This data set includes the results of digital image correlation of one experiment on subduction megathrust earthquakes with interacting asperities performed at the Laboratory of Experimental Tectonics (LET) Univ. Roma Tre in the framework of AspSync, the Marie Curie project (grant agreement 658034) lead by F. Corbi in 2016-2017. Detailed descriptions of the experiments and monitoring techniques can be found in Corbi et al. (2017 and 2019) to which this data set is supplementary material. We here provide Digital Image Correlation (DIC) data relative to a 7 min long interval during which the experiment produces 40 seismic cycles with average duration of about 10.5 s (see Figure S1 in Corbi et al., 2019). The DIC analysis yields quantitative about the velocity field characterizing two consecutive frames, measured in this case at the model surface. For a detailed description of the experimental procedure, set-up and materials used, please refer to the article of Corbi et al. (2017) paragraph 2. This data set has been used for: a) studying the correlation between apparent slip-deficit maps and earthquake slip pattern (see Corbi et al., 2019; paragraph 4); and b) as input for the Machine Learning investigation (see Corbi et al., 2019; paragraph 5). Further technical information about the methods, data products and matlab scripts is proviced in the data description file. The list of files explains the file and folder structure of the data set.
This dataset is supplementary material to the article of Ritter et al. (2017). In this article, the similarity of fault propagation work in analogue sandbox experiments to natural fault networks is investigated through measurements in a strike-slip sandbox and in a ring-shear-tester. The transient shear strength of the samples is measured for different fault lengths and from this the work is determined. For a detailed description of the procedure and the set-up please see Ritter et al. (2017). The data available in this supplementary publication are: • For the strike-slip experiments three video sequences of the deformation together with the evolution of boundary force for fault lengths of 20 cm, 30 cm and 40 cm. The videos show the curl of the deformation field, determined by Digital Image Correlation of top-view video images. These files are in AVI-format and included in the zip folder 2017-005-Ritter-movies.zip. • A folder containing force vs. displacement measurements for each experiment (2017-005-Ritter-forces.zip). These are 25 ASCII-files that contain two columns of numerical data: the first column is the displacement in meter; the second column is the corresponding force in newton. The files are named according to the following pattern: <fault length in meter>_<experiment number>.asc • A Matlab script to load the force files and calculate the work. This file is called “plotwork.m” and calls the Matlab function “work.m”, which does the actual calculations. These files have been tested in Matlab version 2012b. The surface deformation data are available upon request.
This dataset is supplementary to the article of Ritter et al. (2017). In this article, a new experimental device is presented that facilitates precise measurements of boundary forces and surface deformation at high temporal and spatial resolution. This supplementary dataset contains the measurement data from two experiments carried out in this new experimental device: one experiment of an accretionary critical wedge and one of Riedel-type strike-slip deformation. For a detailed description of the set-up and an analysis of the data, please see Ritter et al. (2017). The data available for either experiment are: • A video showing deformation in top view together with the evolution of boundary force. This file is in AVI-format. • A time-series of 2D vector fields describing the surface deformation. These vector fields were obtained from top-view video images of the respective experiment by means of digital image correlation (DIC). Each vector field is contained in a separate file; the files are consecutively numbered. The vector fields are stored in *.mat-files that can be opened using e.g. the software Matlab or the freely available GNU Octave. They take the form of Matlab structure arrays and are compatible to the PIVmat-toolbox by Moisy (2016) that is freely available. The most important fields of the structure are: x and y, that are vectors spanning a coordinate system, and vx and vy, which are arrays containing the actual vector components in x- and y-direction, respectively. • A file containing the measurements of the boundary force applied to drive deformation. This file is also a *.mat-file, containing a structure F with fields force, velocity and position. These fields are vectors describing the force applied by the indenter, the indenter velocity and the indenter position
| Organisation | Count |
|---|---|
| Wissenschaft | 8 |
| Type | Count |
|---|---|
| unbekannt | 8 |
| License | Count |
|---|---|
| Offen | 8 |
| Language | Count |
|---|---|
| Englisch | 8 |
| Resource type | Count |
|---|---|
| Keine | 8 |
| Topic | Count |
|---|---|
| Boden | 3 |
| Lebewesen und Lebensräume | 1 |
| Luft | 1 |
| Mensch und Umwelt | 8 |
| Wasser | 1 |
| Weitere | 8 |