Die Karte oberflächennaher Rohstoffe 1:200.000 (KOR 200) ist ein Kartenwerk, das gemeinsam von der Bundesanstalt für Geowissenschaften und Rohstoffe und den Staatlichen Geologischen Diensten der Länder (SGD) im Auftrag des Bundesministers für Wirtschaft und Arbeit auf Beschluss der Länderwirtschaftsminister vom 22. Juni 1984 erarbeitet wird. Das Kartenwerk folgt dem Blattschnitt der topographischen Übersichtskarte 1:200.000 (TÜK 200) und besteht aus 55 Kartenblättern mit jeweils einem Erläuterungsheft. Es erfolgt eine Bestandsaufnahme, Beschreibung, Darstellung und Dokumentation der Vorkommen und Lagerstätten von mineralischen Rohstoffe, die üblicherweise im Tagebau bzw. an oder nahe der Erdoberfläche gewonnen werden. Im Besonderen sind dies Industrieminerale, Steine und Erden, Torfe, Braunkohle, Ölschiefer und Solen. Die Darstellung der oberflächennahen Rohstoffe und die zusätzlichen schriftlichen Informationen sind für die Erarbeitung überregionaler, bundesweiter Planungsunterlagen, die die Nutzung oberflächennaher mineralischer Rohstoffe berühren, unentbehrlich. Auf der Karte sind neben den umgrenzten, je nach Rohstoff farblich unterschiedlich dargestellten Lagerstätten- bzw. Rohstoffflächen "Abbaustellen" (=Betriebe) bzw. "Schwerpunkte mehrerer Abbaustellen" mit je einem Symbol dargestellt. Die Eintragungen in der Karte werden ergänzt durch Texterläuterungen. Die Erläuterungsbände haben üblicherweise einen Umfang von 40 - 80 Seiten und sind derzeit nur in der gedruckten Ausgabe der Karte verfügbar. Der Text ist gegliedert in: - Einführung - Beschreibung der Lagerstätten und Vorkommen nutzbarer Gesteine - Rohstoffwirtschaftliche Bewertung der Lagerstätten und Vorkommen oberflächennaher Rohstoffe im Blattgebiet - Verwertungsmöglichkeiten der im Blattgebiet vorkommenden nutzbaren Gesteine - Schriftenverzeichnis - Anhang (u. a. mit Generallegende und Blattübersicht) Die KOR 200 stellt somit die Rohstoffpotentiale in Deutschland in bundesweit vergleichbarer Weise dar und liefert eine Grundlage für künftige Such- und Erkundungsarbeiten sowie einen Beitrag zur Sicherung der Rohstoffversorgung.
Das Projekt "ENALT 1C, Use of heat from waste water and sewage gas from a sewage works for district heating" wird/wurde gefördert durch: Kommission der Europäischen Gemeinschaften Brüssel. Es wird/wurde ausgeführt durch: Stadtwerke Waiblingen.Objective: Utilization of the heat potential of cleaned waste water and sewage gases from a sewage treatment plant by means of an absorption heat pump for the heating of several large buildings of the town of Waiblingen. General Information: The planned district heating of the town of Waiblingen consists of an absorption heat pump and 2 gas boilers, operating in a bivalent parallel connection. It has a total heating capacity of 9500 kW (2500 kW heat pump, 2 x 3500 kW boilers). For the supply of the users, a heating capacity of 6450 kW is necessary, the surplus capacity serves as reserve. The plant utilizes the heat potential of cleaned waste water and sewage gases from the town's sewage treatment plant to produce heating waste which is fed in to the network for the heating of 6 public buildings: town hall, covered market, indoor swimming pool, civic center, sewage plant, hospital. The absorption heat pump operates with NH3 a heat carrier and a NH2 - water solution as solvent. The heat source is the waste water from the sewage treatment plant which is cooled down from 9 degree C to 5 degree C in the heat pump evaporator. An automatic brush cleaning system keeps the evaporator free of dirt. The ejection boiler is fired with sewage gas and natural gas. Apart of the ejection boiler's exhaust gas, heat is recovered in a heat exchanger for the heating of the district heating water. In the whole heat pump system, the district heating water is heated from its return temperature of 40 degree C to a supply temperature of 65 degree C. The heat pump covers the base load of the district heating network, it supplies about 77 per cent of the total annual output of the district heating plant. In the case of consumption peaks at low outside temperatures, the boilers, using natural gas and sewage gas as fuel, are switched on. When using the boilers, the temperature of the supply water of the heating network can be raised to 110 degree C. A surplus of hot water produced by the heat pump is fed into an 80 m3 storage tank and can again be taken out in case of an increasing heat demand in the district heating circuit. The calculated energy saving of this heat pump - boiler plant amounts to 880 TOE/y, compared with a monovalent decentral gas boiler concept. The cost of the project amounts to DM 11,434,246. The construction phase of the project has started in 1983. The completion of the demonstration is expected for the end of 1984. Achievements: The Waiblingen plant has operated satisfactorily. Only the development of micro-organisms in the treated waste water on a few days in 1984. These micro-organisms brought about severe fouling of the automatic backwashing filter, which could only be removed by manual cleaning. It is, however, possible to avoid such upset conditions by careful monitoring and by applying adequate cleaning methods. As far as the energetic aspects are concerned, plant operation in practice shows positive and negative deviations from design and ...