API src

Found 5119 results.

Related terms

MSRL-D8: Zink im Sediment, <20µm

Zink im Sediment, <20µm von 2005 bis 2010.

Chemical composition and Sr, Nd, Pb isotope ratios of mafic igneous rocks from the Ordovician Saxothuringian basin east of and within the post-Devonian Müncheberg massif, NE Bavaria, Germany

The sampling area is located east (E-domain) and west (W-domain) of the Münchberg gneiss massif, NE Bavaria. Germany. Major and trace element compositions and Sr, Nd, and Pb isotope composition of a selected subset of Ordovician samples and post- Devonian samples of mafic igneous rocks are documented in the Table 1 'E-domain'. Sr, Nd, and Pb isotope composition of selected mafic igneous rocks from the W-domain of Ordovicician, Silurian, and Devonian age are documented together with the previously analysed Rb-Sr, Sm-Nd, U-Th-Pb concentrations (Höhn et. al., 2018, doi:10.1007/s00531-017-1497-2) in the Table 2 'W-domain'.

GWB: Zink

Darstellung von Zink

Entwicklung von Analysenmethoden zur Untersuchung des Meerwassers auf schaedliche Schwermetalle

Es sollen weitere schaedliche Schwermetalle, die bisher im DHI noch nicht hinreichend bearbeitet werden konnten, in die Ueberwachungsprogramme aufgenommen werden. Hierzu zaehlt im Meerwasser mit hoechster Prioritaet die Bestimmung von Blei und Zink durch Invers-Involtametrie, die Bestimmung von Titan, Chrom und Vanadium durch Atomabsorptionsspektrometrie, sowie die Bestimmung von vielen weiteren Elementen durch Totalreflexions- Roentgenfluoreszenzanalyse. Hierzu muessen auch die bewaehrten Probenahmemethoden im Hinblick auf moegliche Kontaminationen bei neu zu untersuchenden Metallen geprueft werden. Alle neuen Verfahren und Untersuchungen dienen unmittelbar dem Ziel, eine regelmaessige Ueberwachung auf die in Zukunft neu hinzutretenden Elemente im Rahmen internationaler und nationaler Verpflichtungen des DHI durch geeignete und erprobte Verfahren sicherzustellen.

Schwermetalle im Boden: Schwermetalle im Huminstoffsystem unterschiedlich belasteter Boeden und deren Beziehung zur Pflanzenaufnahme

Basierend auf Laborversuchen zur Bindung von Schwermetallen an Huminstoffe wird versucht, die Bedeutung des Humus fuer die Festlegung oder Mobilisierung von Schwermetallen im Boden und somit fuer die Pflanzenverfuegbarkeit zu evaluieren. Als Methoden kommen Gefaessversuche, Sandkulturversuche und Naehrloesungsversuche zur Anwendung. Die Ergebnisse des ersten Gefaessversuches lassen einen Einfluss des Huminstoffsystems auf die Geschwindigkeit und Staerke der Festlegung von kuenstlich aufgebrachtem Zn und Cd erkennen.

WMS MSRL: D8-Schadstoffe (sh-llur), Mittelwert 2005-2010

Der WMS umfasst Schadstoffe im Wasser und im Sediment, die an Messstationen des LLUR erfasst werden. Parameter: Quecksilber, Blei, Kupfer, Nickel, Arsen, Cadmium, Chrom, Zink.

Regionalplanung Sachsen - Wasser und Hochwasser

Es sind regionalplanerische Festlegungen des Komplexes Raumnutzung - Wasser und Hochwasser dargestellt. Dieser Dienst enthält Daten der Planungsregionen Region Chemnitz und Oberlausitz-Niederschlesien und deckt im Endausbau den gesamten Freistaat Sachsen ab. Die entsprechenden Daten des Regionalen Planungsverbandes Oberes Elbtal/Osterzgebirge sind seit dem 23.11.2023 unwirksam. Entsprechend des Landesentwicklungsplanes 2013 als fachübergreifendes Gesamtkonzept zur räumlichen Entwicklung, Ordnung und Sicherung des Freistaates Sachsen stellen die Regionalpläne einen verbindlichen Rahmen für die räumliche Entwicklung, Ordnung und Sicherung des Raumes dar. Die rechtsverbindlichen Pläne werden in der Regel im Maßstab 1:100.000 erstellt.

Geochemical parameters in peat depth profiles from ombrotrophic bogs in North and Central Europe. Pichlmaier Moor, Austria

This dataset contains geochemical variables measured in six depth profiles from ombrotrophic peatlands in North and Central Europe. Peat cores were taken during the spring and summer of 2022 from Amtsvenn (AV1), Germany; Drebbersches Moor (DM1), Germany; Fochteloër Veen (FV1), the Netherlands; Bagno Kusowo (KR1), Poland; Pichlmaier Moor (PI1), Austria and Pürgschachen Moor (PM1), Austria. The cores AV1, DM1 and KR1 were taken using a Wardenaar sampler (Royal Eijkelkamp, Giesbeek, the Netherlands) and had diameter of 10 cm. The cores FV1, PM1 and PI1 had an 8 cm diameter and were obtained using an Instorf sampler (Royal Eijkelkamp, Giesbeek, the Netherlands). The cores FV1, DM1 and KR1 were 100 cm, core AV1 was 95 cm, core PI1 was 85 cm and core PM1 was 200 cm. The cores were subsampeled in 1 cm (AV1, DM1, KR1, FV1) and 2 cm (PI1, PM1) sections. The subsamples were milled after freeze drying in a ballmill using tungen carbide accesoires. X-Ray Fluorescence (WD-XRF; ZSX Primus II, Rigaku, Tokyo, Japan) was used to determine Al (μg g-1), As (μg g-1), Ba (μg g-1), Br (μg g-1), Ca (g g-1), Cl (μg g-1), Cr (μg g-1), Cu (μg g-1), Fe (g g-1), K (g g-1), Mg (μg g-1), Mn (μg g-1), Na (μg g-1), P (μg g-1), Pb (μg g-1), Rb (μg g-1), S (μg g-1), Si (μg g-1), Sr (μg g-1), Ti (μg g-1) and Zn (μg g-1). These data were processed and calibrated using the iloekxrf package (Teickner & Knorr, 2024) in R. C, N and their stable isotopes were determined using an elemental analyser linked to an isotope ratio mass spectrometer (EA-3000, Eurovector, Pavia, Italy & Nu Horizon, Nu Instruments, Wrexham, UK). C and N were given in units g g-1 and stable isotopes were given as δ13C and δ15N for stable isotopes of C and N, respectively. Raw data C, N and stable isotope data were calibrated with certified standard and blank effects were corrected with the ilokeirms package (Teickner & Knorr, 2024). Using Fourier Transform Mid-Infrared Spectroscopy (FT-MIR) (Agilent Cary 670 FTIR spectromter, Agilent Technologies, Santa Clara, Ca, USA) humification indices (HI) were determined. Spectra were recorded from 600 cm-1 to 4000 cm-1 with a resolution of 2 cm-1 and baselines corrected with the ir package (Teickner, 2025) to estimate relative peack heights. The HI (no unit) for each sample was calculated by taking the ratio of intensities at 1630 cm-1 to the intensities at 1090 cm-1. Bulk densities (g cm-3) were estimated from FT-MIR data (Teickner et al., in preparation).

Geochemical parameters in peat depth profiles from ombrotrophic bogs in North and Central Europe. Drebbersches Moor, Germany

This dataset contains geochemical variables measured in six depth profiles from ombrotrophic peatlands in North and Central Europe. Peat cores were taken during the spring and summer of 2022 from Amtsvenn (AV1), Germany; Drebbersches Moor (DM1), Germany; Fochteloër Veen (FV1), the Netherlands; Bagno Kusowo (KR1), Poland; Pichlmaier Moor (PI1), Austria and Pürgschachen Moor (PM1), Austria. The cores AV1, DM1 and KR1 were taken using a Wardenaar sampler (Royal Eijkelkamp, Giesbeek, the Netherlands) and had diameter of 10 cm. The cores FV1, PM1 and PI1 had an 8 cm diameter and were obtained using an Instorf sampler (Royal Eijkelkamp, Giesbeek, the Netherlands). The cores FV1, DM1 and KR1 were 100 cm, core AV1 was 95 cm, core PI1 was 85 cm and core PM1 was 200 cm. The cores were subsampeled in 1 cm (AV1, DM1, KR1, FV1) and 2 cm (PI1, PM1) sections. The subsamples were milled after freeze drying in a ballmill using tungen carbide accesoires. X-Ray Fluorescence (WD-XRF; ZSX Primus II, Rigaku, Tokyo, Japan) was used to determine Al (μg g-1), As (μg g-1), Ba (μg g-1), Br (μg g-1), Ca (g g-1), Cl (μg g-1), Cr (μg g-1), Cu (μg g-1), Fe (g g-1), K (g g-1), Mg (μg g-1), Mn (μg g-1), Na (μg g-1), P (μg g-1), Pb (μg g-1), Rb (μg g-1), S (μg g-1), Si (μg g-1), Sr (μg g-1), Ti (μg g-1) and Zn (μg g-1). These data were processed and calibrated using the iloekxrf package (Teickner & Knorr, 2024) in R. C, N and their stable isotopes were determined using an elemental analyser linked to an isotope ratio mass spectrometer (EA-3000, Eurovector, Pavia, Italy & Nu Horizon, Nu Instruments, Wrexham, UK). C and N were given in units g g-1 and stable isotopes were given as δ13C and δ15N for stable isotopes of C and N, respectively. Raw data C, N and stable isotope data were calibrated with certified standard and blank effects were corrected with the ilokeirms package (Teickner & Knorr, 2024). Using Fourier Transform Mid-Infrared Spectroscopy (FT-MIR) (Agilent Cary 670 FTIR spectromter, Agilent Technologies, Santa Clara, Ca, USA) humification indices (HI) were determined. Spectra were recorded from 600 cm-1 to 4000 cm-1 with a resolution of 2 cm-1 and baselines corrected with the ir package (Teickner, 2025) to estimate relative peack heights. The HI (no unit) for each sample was calculated by taking the ratio of intensities at 1630 cm-1 to the intensities at 1090 cm-1. Bulk densities (g cm-3) were estimated from FT-MIR data (Teickner et al., in preparation).

Geochemical parameters in peat depth profiles from ombrotrophic bogs in North and Central Europe. Fochteloër Veen, the Netherlands

This dataset contains geochemical variables measured in six depth profiles from ombrotrophic peatlands in North and Central Europe. Peat cores were taken during the spring and summer of 2022 from Amtsvenn (AV1), Germany; Drebbersches Moor (DM1), Germany; Fochteloër Veen (FV1), the Netherlands; Bagno Kusowo (KR1), Poland; Pichlmaier Moor (PI1), Austria and Pürgschachen Moor (PM1), Austria. The cores AV1, DM1 and KR1 were taken using a Wardenaar sampler (Royal Eijkelkamp, Giesbeek, the Netherlands) and had diameter of 10 cm. The cores FV1, PM1 and PI1 had an 8 cm diameter and were obtained using an Instorf sampler (Royal Eijkelkamp, Giesbeek, the Netherlands). The cores FV1, DM1 and KR1 were 100 cm, core AV1 was 95 cm, core PI1 was 85 cm and core PM1 was 200 cm. The cores were subsampeled in 1 cm (AV1, DM1, KR1, FV1) and 2 cm (PI1, PM1) sections. The subsamples were milled after freeze drying in a ballmill using tungen carbide accesoires. X-Ray Fluorescence (WD-XRF; ZSX Primus II, Rigaku, Tokyo, Japan) was used to determine Al (μg g-1), As (μg g-1), Ba (μg g-1), Br (μg g-1), Ca (g g-1), Cl (μg g-1), Cr (μg g-1), Cu (μg g-1), Fe (g g-1), K (g g-1), Mg (μg g-1), Mn (μg g-1), Na (μg g-1), P (μg g-1), Pb (μg g-1), Rb (μg g-1), S (μg g-1), Si (μg g-1), Sr (μg g-1), Ti (μg g-1) and Zn (μg g-1). These data were processed and calibrated using the iloekxrf package (Teickner & Knorr, 2024) in R. C, N and their stable isotopes were determined using an elemental analyser linked to an isotope ratio mass spectrometer (EA-3000, Eurovector, Pavia, Italy & Nu Horizon, Nu Instruments, Wrexham, UK). C and N were given in units g g-1 and stable isotopes were given as δ13C and δ15N for stable isotopes of C and N, respectively. Raw data C, N and stable isotope data were calibrated with certified standard and blank effects were corrected with the ilokeirms package (Teickner & Knorr, 2024). Using Fourier Transform Mid-Infrared Spectroscopy (FT-MIR) (Agilent Cary 670 FTIR spectromter, Agilent Technologies, Santa Clara, Ca, USA) humification indices (HI) were determined. Spectra were recorded from 600 cm-1 to 4000 cm-1 with a resolution of 2 cm-1 and baselines corrected with the ir package (Teickner, 2025) to estimate relative peack heights. The HI (no unit) for each sample was calculated by taking the ratio of intensities at 1630 cm-1 to the intensities at 1090 cm-1. Bulk densities (g cm-3) were estimated from FT-MIR data (Teickner et al., in preparation).

1 2 3 4 5 … 510 511 512