API src

Found 36 results.

Other language confidence: 0.8199238553416377

Digital Image Correlation data from experiments of releasing bend evolution within different strength wet kaolin

The data set includes the Digital Image Correlation (DIC) results for four experiments of releasing bends along dextral strike-slip faults that were performed at the University of Massachusetts at Amherst (USA). Gabriel et al. (in prep.) used the DIC data sets to investigate how releasing bend fault systems evolve within different strength wet kaolin. Information on the experimental set up and methods can be found in the main text and supplement to Gabriel et al. (in prep.). The data here include the incremental displacement time series, strain animation and surface elevation data at the end of the two experiments with different clay strength, which are presented within Gabriel et al. (in prep). We also include in this data repository incremental displacement time series and strain animations from two experiments that repeat the conditions of the experiments featured in Gabriel et al. (2025).

Ring-shear test data of foamglass used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing)

This dataset provides friction data from ring-shear tests foamglass used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing). According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of corundum sand are µP = 0.55, µD = 0.52, and µR = 0.57, respectively (Table 4). Cohesion of the material ranges between 10-30 Pa. The tested bulk material consists of foamglass with grain size of 180-380 µm (Table 1) and is sold under the name "Floating Bead" with the product number PZ-002 by the company Tuyun Mineral Products (1688.com). The data presented here are derived by ring shear testing using a SCHULZE RST-01.pc (Schulze, 1994, 2003, 2008) at HelTec, the Laboratory for experimental tectonics at the Helmholtz Center Potsdam – GFZ German Research Centre for Geosciences in Potsdam, Germany. The RST is specially designed to measure friction coefficients µ and cohesions C in loose granular material accurately at low confining pressures (<20 kPa) and shear velocities (<1 mm/sec) similar to sandbox experiments. In this tester, a granular bulk material layer is sheared internally at constant normal stress σN and shear velocity v while shear force and lid displacement (corresponding to density and volume change ΔV) are measured continuously. For more details see Klinkmüller et al. (2016).

Ring-shear test data of mica used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing)

This dataset provides friction data from ring-shear tests black mica used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing). According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of corundum sand are µP = 0.59, µD = 0.56, and µR = 0.57, respectively (Table 4). Cohesion of the material ranges between 100-130 Pa. The tested bulk material consists of black mica (Biotite) with grain size of 380-830 µm and is sold under the name "Black Mica" with the product number YS-004 by the company Yunshi Building Materials Co., Ltd (1688.com). The data presented here are derived by ring shear testing using a SCHULZE RST-01.pc (Schulze, 1994, 2003, 2008) at HelTec, the Laboratory for experimental tectonics at the Helmholtz Center Potsdam – GFZ German Research Centre for Geosciences in Potsdam, Germany. The RST is specially designed to measure friction coefficients µ and cohesions C in loose granular material accurately at low confining pressures (<20 kPa) and shear velocities (<1 mm/sec) similar to sandbox experiments. In this tester, a granular bulk material layer is sheared internally at constant normal stress σN and shear velocity v while shear force and lid displacement (corresponding to density and volume change ΔV) are measured continuously. For more details see Klinkmüller et al. (2016).

Ring-shear test data of quartz sand SIBELCO S80 used for analogue modelling in the Tectonic Laboratory (TecLab) at Utrecht University

This dataset provides friction data from ring-shear tests on quartz sand SIBELCO S80 used in analogue modelling of tectonic processes as a rock analogue for the earth’s upper crust (e.g., Klinkmüller et al., 2016). According to our analysis the material shows a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of quartz sand S80 are µP = 0.75, µD = 0.59, and µR = 0.69, respectively (Table 5). Cohesion of the material ranges between 0-80 Pa. The material shows no rate-dependency (<1% per ten-fold change in shear velocity v). The tested bulk material consists of quartz sand SIBELCO S80 with grain size of ~0.63-355 µm (D50 = 175 µm. Bulk and grain densities are 1300 kg/m³ and 2650 kg/m³, respectively and the hardness is 7 on Moh’s scale. S80 is sold e.g., by the company SIBELCO (sibelco.com).

A Database of Centrifuge Analogue Models Testing the Influence of Pre-Existing Weak Zones During Continental Compression

This dataset presents the raw data of an experimental series of centrifuge models performed to test the influence of pre-existing weak zones in the lower crust (herein after referred to as Weak Lower Crust –WLC) during continental compression. We varied the width of the WLC, the dip of the interfaces bounding the WLC and the frictional properties at the WLC-LC interface by using lubricant (vaseline). In this dataset, we provide four different types of data, that can serve as supporting material and can be used for further analysis: 1) The top-view photos, taken at different stages and showing the deformation process of each model; 2) Digital Elevation Models (DEMs) used to reconstruct the 3D deformation of the performed analogue models; 3) Line-drawing of fault and fracture patterns to be used for fault statistical quantification; 4) A Python script to draw swath profiles (outputs) of the analogue models. Further details on the modelling strategy can be found in the publication associated with this dataset and in Milazzo et al. (2021), using a similar setup for achieving compression in the centrifuge. Materials used for these analogue models were described in Corti (2012), Montanari et al. (2017), Del Ventisette et al. (2019), Zou et al. (2024) and Wan et al. (2025).

Ring-shear test data of wallnut shells used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing))

This dataset provides friction data from ring-shear tests walnut shells used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing). According to our analysis the tested materials behave as a Mohr-Coulomb material characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of corundum sand are µP = 0.90, µD = 0.63, and µR = 0.68, respectively (Table 4). Cohesion of the material ranges between 0-40 Pa. The tested bulk material consists of walnut shells with grain size of 180-380 µm (Table 1) and is sold under the name "Walnut Shells" with the product number YR-98547 by the company Yiran Mineral Products (1688.com). The data presented here are derived by ring shear testing using a SCHULZE RST-01.pc (Schulze, 1994, 2003, 2008) at HelTec, the Laboratory for experimental tectonics at the Helmholtz Center Potsdam – GFZ German Research Centre for Geosciences in Potsdam, Germany. The RST is specially designed to measure friction coefficients µ and cohesions C in loose granular material accurately at low confining pressures (<20 kPa) and shear velocities (<1 mm/sec) similar to sandbox experiments. In this tester, a granular bulk material layer is sheared internally at constant normal stress σN and shear velocity v while shear force and lid displacement (corresponding to density and volume change ΔV) are measured continuously. For more details see Klinkmüller et al. (2016).

Ring-shear test data of colored quartz sand used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing)

This dataset provides friction data from ring-shear tests colored quartz sand used for analogue modelling in the experimental tectonics laboratory at China University of Petroleum (Beijing). According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of corundum sand are µP = 0.75, µD = 0.59, and µR = 0.67, respectively (Table 5). Cohesion of the material ranges between 20-90 Pa. The tested bulk material consists of blue colored quartz sand with grain size of 180-380 µm and is sold under the name "Colored Sand" with the product number A1 by the company Xinran Mineral Products (1688.com). The data presented here are derived by ring shear testing using a SCHULZE RST-01.pc (Schulze, 1994, 2003, 2008) at HelTec, the Laboratory for experimental tectonics at the Helmholtz Center Potsdam – GFZ German Research Centre for Geosciences in Potsdam, Germany. The RST is specially designed to measure friction coefficients µ and cohesions C in loose granular material accurately at low confining pressures (<20 kPa) and shear velocities (<1 mm/sec) similar to sandbox experi-ments. In this tester, a granular bulk material layer is sheared internally at constant normal stress σN and shear velocity v while shear force and lid displacement (corresponding to density and vol-ume change ΔV) are measured continuously. For more details see Klinkmüller et al. (2016).

A database of analogue models documenting fault reactivation during multiphase extension.

In this dataset we provide top-view photos and perspective photos (to create topographic data, i.e. Digital Elevation Models, DEMs) documenting analogue model deformation. For more details on modelling setup, experimental series Wang et al. (2021), to which this dataset is supplementary material. For details on analogue materials refer to Del Ventisette et al., 2019, Maestrelli et al. (2020). The analogue modelling experiments were carried out at the TOOLab (Tectonic Modelling Laboratory) of the Institute of Geosciences and Earth Resources of the National Research Council of Italy, Italy, and the Department of Earth Sciences of the University of Florence. The laboratory work that produced these data was supported by the European Plate Observing System (EPOS) and by the Joint Research Unit (JRU) EPOS Italia. Additional analysis, following the original work, was supported by the “Monitoring Earth’s Evolution and Tectonics” (MEET) project

Ring-shear test data of white mica used for analogue modelling in the Tectonic Laboratory (TecLab) at Utrecht University

This dataset provides friction data from ring-shear tests white mica (Muscovite) used for analogue modelling in the Tectonic Laboratory (TecLab) at Utrecht University. According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of white mica sand are µP = 0.60, µD = 0.56, and µR = 0.55, respectively (Table 5). Cohesion of the material ranges between 140-180 Pa. The tested bulk material consists of white mica (Muscovite) with grain sizes ranging from 45-600 µm with the following distribution: 45-106µm – 10-25%, 106-425µm – 65-85%, 425-600µm – <2.5%.

Ring-shear test data of glass beads 100-200 µm used for analogue experiments in the tectonic modelling labs at GFZ Potsdam and the Institute of Geophysics of the Czech Academy of Sciences, Prague

This dataset provides friction data from ring-shear tests on glass beads with a diameter of 100-200 µm used in analogue modelling of tectonic processes as a rock analogue for “weak” layers in the earth’s upper crust (e.g. Klinkmüller et al., 2016; Ritter et al., 2016; Lohrmann et al., 2003) or as “seismogenic” crust (Rudolf et al., 2022). The glass beads are characterized by means of internal friction coefficients µ and cohesion C. According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of the glass beads are µP = 0.50 , µD = 0.39, and µR = 0.46, respectively (Table 5). Cohesion of the material is close to zero Pa. The material shows a minor rate-weakening of ~1% per ten-fold change in shear velocity v and a stick-slip behaviour at low shear velocities and at high loads.

1 2 3 4