Other language confidence: 0.973613706216798
A sequence of three strong (MW 7.2–6.4) and several moderate (MW 4.4–5.7) earthquakes struck the Pamir Plateau and surrounding mountain ranges of Tajikistan, China, and Kyrgyzstan in 2015–2017. With a local seismic network in operation in the Xinjiang province of China since August 2015 (FDSN code 8H; Yuan et al., 2018a), an aftershock network on the Pamir Plateau of Tajikistan since February 2016 (FDSN code 9H; Yuan et al., 2018b), and additional permanent regional seismic stations (FDSN code TJ; PMP International, 2005; XJ network; SEISDMC, 2021), we were able to record the succession of the fore-, main-, and aftershock sequences at local distances with good azimuthal coverage. We here provide P and S body wave arrival times of the 11,784 relocated seismic events and additional arrival times of 18,011 seismic events that could not be located with precision. The ASCII QuakeML files (.xml; https://quake.ethz.ch/quakeml/QuakeML) consist of seismic arrival times, station and network codes, nominal arrival time uncertainties, localization residuals, and corresponding preliminary event locations. The ASCII NonLinLoc Hypocenter-Phase files (.hyp; http://alomax.free.fr/nlloc/ -> Formats -> NLLoc Hypocenter-Phase file) consist of seismic arrival times, station codes, nominal arrival time uncertainties, localization residuals, ray take-off angles and corresponding preliminary event locations.
The International Geodynamics and Earth Tide Service (IGETS) was established in 2015 by the International Association of Geodesy (IAG). IGETS continues the activities of the Global Geodynamics Project (GGP, 1997-2015) to provide support to geodetic and geophysical research activities using superconducting gravimeter (SG) data within the context of an international network. The SG site “Serrahn” is located in the TERENO Observatory in the nort-eastern German lowlands. The observatory contributes to investigating the regional impact of climate and land use change. At the IGETS site Serrahn, the mean annual temperature is 8.8 °C and mean annual precipitation is 591 mm. The land cover is mainly characterized as a mixed forest, dominated by European beech and Scots pine. Influenced by the last glaciation in an outwash close to the terminal morraine, the uppermost soil layer of the site consists of aeolian sands up to a depth of 450 cm, followed by coarser sandy material with intercalated till layers. The unconfined groundwater level is at about 14 m below surface. There is hardly any human activity (e.g., traffic) at this quiet forest site. The nearest town is Neustrelitz at a distance of 5 km. Since December 2017, the superconducting gravimeter iGrav-033 is operated outdoors at this forest location (Latitude: 53.3392 N, Longitude: 13.17413 E, Elevation: 79.60 m). The gravimeter is installed in a dedicated field enclosure on top of a concrete pillar with an area of 1.1 m x 1.1 m at an elevation of 0.80 m above the terrain surface. The pillar has been build to a depth of 2.00 m below the surface. One additional pillar (also 1.1 m x 1.1 m, at surface level) is located right next to the iGrav installation and is used for repeated observations with absolute gravimeters (AG). At the site, meteorological (precipitation, air temperature, humidity, air pressure) and hydrological (groundwater, soil moisture, sapflow, throughfall) parameters are monitored by different sensors. Raw gravity and local atmospheric pressure records sampled at second intervals and the same records decimated at 1‐minute samples are provided as Level 1 products to the IGETS network.
The International Geodynamics and Earth Tide Service (IGETS) was established in 2015 by the International Association of Geodesy (IAG). IGETS continues the activities of the Global Geodynamics Project (GGP, 1997-2015) to provide support to geodetic and geophysical research activities using superconducting gravimeter (SG) data within the context of an international network. Raw gravity and local atmospheric pressure records sampled at second and the same records decimated at 1‐minute samples are provided as Level 1 products of the IGETS network for the Pecný station (https://doi.org/10.5880/igets.pe.l1.001). The corrected 1-minute samples have been prepared by operators of the station, from raw decimated 1-minute samples, by following steps: 1) The 1-minute samples have been used to compute residual gravity signal by using the SG calibration factor and applying corrections from tides, atmosphere and polar motion. 2) These data have been associated with auxiliary data from the SG (Dewar Pressure, Tx/Ty balance, Neck temperature etc.) and information from LOG files. 3) Gaps have been created in the residual gravity signal according to auxiliary data and log files. Moreover, gaps were created also for large disturbances, where the residual signal exceeding 20 nm/s^2. 4) Gaps up to 24 hours were filled by a linear fit. 5) Spikes exceeding 5 nm/s^2 were removed by using TSOFT. 6) Steps were applied only in exceptional cases in accordance with LOG files. 7) The cleaned residual signal was converted to corrected 1-minute samples by using the same corrections and the calibration factor as used in 1). Therefore, the corrected 1-minute signal is again in units as the raw data (Volt). Note, since 31 October 2017, the OSG-050 is running at new site (NGL - new gravimetric laboratory at Pecný) according to https://doi.org/10.5880/igets.pe.l1.001.
A sequence of three strong (M W 7.2–6.4) and several moderate (M W 4.4–5.7) earthquakes struck the Pamir Plateau and surrounding mountain ranges of Tajikistan, China, and Kyrgyzstan in 2015–2017. With a local seismic network in operation in the Xinjiang province since August 2015, an aftershock network on the Pamir Plateau of Tajikistan since February 2016, and additional permanent regional seismic stations, we were able to record the succession of the fore-, main-, and aftershock sequences at local distances with good azimuthal coverage. We located 11,784 seismic events and determined the moment tensor for 33 earthquakes. The seismicity delineates the major tectonic structures of the Pamir, i.e., the thrusts that absorb shortening along the plateau thrust front, and the strike-slip and normal faults that dissect the Plateau into a westward extruding and a northward advancing block. Fault ruptures were activated subsequently at increasing distances from the initial M W 7.2 Sarez. All mainshock areas but the initial one exhibited foreshock seismicity which was not modulated by the occurrence of the earlier earthquakes. The tabular ASCII data of the seismic event catalog consist of origin date, time, location, depth and magnitude of the events, along with the quality measures: number of P- and S-wave arrival time picks, location root-mean-square misfit and localization method. The tabular ASCII data of the moment tensor catalog consist of origin date, time, location, the six independent components of the moment tensor, the moment magnitude, and the orientation of the preferred fault plane parameterized as fault strike, dip and rake. -------------------------- Version history: 2026-01-31: Version 2.0 Exchange of the file "2022-007_Bloch-et-al_moment_tensor_catalog.txt" with the new file "2022-007_Bloch-et-al_moment_tensor_catalog_correct_norm_v2.0.txt". The original file is available in the "previous-versions" folder. Reason: The normalization of the components of the moment tensor (columns mrr, mtt, mff, mrt, mrf, mtf, exp) was incorrect so that the resulting moment tensor had a too large absolute moment. The reported moment magnitude and the relative scaling of the moment tensor components was correct, thought.
The International Geodynamics and Earth Tide Service (IGETS) was established in 2015 by the International Association of Geodesy (IAG). IGETS continues the activities of the Global Geodynamics Project (GGP, 1997-2015) to provide support to geodetic and geophysical research activities using superconducting gravimeter (SG) data within the context of an international network. The Geodetic Observatory Pecný (GOPE) is located in the Czech Republic, about 40 km south-east of Prague, in the Central Bohemian hilly land at the elevation of about 500 m. It is surrounded by a mixed wood. Except for one local road the next nearest local road is about 1 km apart, the nearest railway is 5.2 km, the nearest village 1 km (Ondřejov). The bigger river (Sázava) flows through the valley at a distance of 5 km from the observatory at the height of about 300 m. No construction or other technological works (mines, industrial plants etc.) run either in the close surroundings or at longer distance. The hill Pecný is in the old metamorphic paleozoic synclinal zone of the Čerčany Chlum neighbouring with the Central Bohemian granitic massif and the perm massif of Černý Kostelec. From the geological point of view, GOPE was established in very stable region. GOPE is operated by the Research Institute of Geodesy, Topography and Cartography (RIGTC) and was established in 1957. GOPE has been involved in tidal observations with spring gravimeters since the early seventies of the last century, cooperation with the International Center for Earth Tides (ICET) has been dated since 1990. GOPE belongs to the core stations of ECGN - European Combined Geodetic Network, established by the EUREF IAG Subcommission. Since February 2007, the observatory type of one sphere superconducting gravimeter OSG-050 was running in the old gravimetric laboratory (OGL) of GOPE located in the cellar of the main building of GOPE (Latitude: 49.9137 N, Longitude: 14.7856 E, Elevation: 534.58 m), about 1.8 m under the ground of the surrounding relief. Almost uninterrupted 10-year time series of gravity record with OSG-050 has been carried out till October 2017, when the OSG-050 has been moved to the new gravimetric laboratory (NGL) situated in the top of the hill Pecný, less than 100 m from OGL. NGL (Latitude: 49.9141 N, Longitude: 14.7868 E, Elevation: 545.10 m) provides 3 concrete pillars in the ground level, which are founded to the bedrock (4 m below the ground). Two pillars are used for repeated observations with absolute gravimeters (AG) and in the third pillar, located in a separate room, the OSG-050 is running continuously. All rooms are thermally stabilized by air-conditioning systems. Due to the excellent stability of the station and the facilities to inter-compare different AGs, the GOPE was developed as a regional comparison site which serves as a reference for the Czech Gravimetric Network. Since 2001, repeated absolute measurements with interval of one month have been carried out in OGL and later in NGL to achieve continuous drift-free gravity time series by combination of absolute and superconducting data. At the area of the station, meteorological (precipitation, air temperature, humidity, air pressure) and hydrological (ground water and soil moisture) parameters are measured by different sensors. These data are available through auxiliary data in the IGETS database. Raw gravity and local atmospheric pressure records sampled at second and the same records decimated at 1‐minute samples are provided as Level 1 products of the IGETS network.
In "Climatic fluctuations modeled for carbon and sulfur emissions from end-Triassic volcanism" we study perturbations of Earth's climate and biogeochemical cycles by volcanism of the Central Atlantic Magmatic Province (CAMP) during the latest Triassic, about 201 million years ago, using a coupled climate model. The data presented here is the model output on which that manuscript is based on. Additionally, the figures of the publication and scripts (Python and Yorick) to analyse the model output and generate the figures are contained. The model output is provided in different netcdf files. The structure of the model output is explained in a readme file. The data is generated using the coupled ocean-atmosphere model CLIMBER3alpha which models climate globally on a 3.75°x3.75° (ocean) and 22.5° (longitude) x 7.5° (latitude) (atmosphere) grid. More information about the model can be found in the manuscript.
Large rock slope failures play a pivotal role in long-term landscape evolution and are a major concern in land use planning and hazard aspects. While the failure phase and the time immediately prior to failure are increasingly well studied, the nature of the preparation phase remains enigmatic. This knowledge gap is due, to a large degree, to difficulties associated with instrumenting high mountain terrain and the local nature of classic monitoring methods, which does not allow integral observation of large rock volumes. Here, we analyse data from a small network of up to seven seismic sensors installed during July--October 2018 (with 43 days of data loss) at the summit of the Hochvogel, a 2592 m high Alpine peak. We develop proxy time series indicative of cyclic and progressive changes of the summit. Fundamental frequency analysis, horizontal-to-vertical spectral ratio data and end-member modelling analysis reveal diurnal cycles of increasing and decreasing coupling stiffness of a 126,000 m^3 large, instable rock volume, due to thermal forcing. Relative seismic wave velocity changes also indicate diurnal accumulation and release of stress within the rock mass. At longer time scales, there is a systematic superimposed pattern of stress increases over multiple days and episodic stress release within a few days, expressed in an increased emission of short seismic pulses indicative of rock cracking. We interpret our data to reflect an early stage of stick slip motion of a large rock mass, providing new information on the development of large-scale slope instabilities towards catastrophic failure.
We present a 3-D lithospheric-scale model covering the area of Germany that images the regional structural configuration. The model comprises 31 lithostratigraphic units: seawater, 14 sedimentary units, 14 crystalline crustal units and 2 lithospheric mantle units. The corresponding surfaces are integrated from previous studies of the Central European Basin System, the Upper Rhine Graben and the Molasse Basin, together with published geological and geophysical data. The model is a result of a combined workflow consisting of 3-D structural, gravity and thermal modelling applied to derive the 3-D thermal configuration.The top surface elevations and thicknesses of corresponding layers of the 3-D-D model are provided as ASCII files, one for each individual layer of the model. The columns in each file are identical: the Easting is given in the “X COORD (UTM Zone 32N)”, the Northing is in the “Y COORD (UTM Zone 32N)”, the top surface elevation of each layer is given as "TOP (m.a.s.l)", the thickness of each layer is given as "THICKNESS (m)".
| Organisation | Count |
|---|---|
| Wissenschaft | 8 |
| Type | Count |
|---|---|
| unbekannt | 8 |
| License | Count |
|---|---|
| Offen | 8 |
| Language | Count |
|---|---|
| Englisch | 8 |
| Resource type | Count |
|---|---|
| Keine | 8 |
| Topic | Count |
|---|---|
| Boden | 5 |
| Lebewesen und Lebensräume | 7 |
| Luft | 5 |
| Mensch und Umwelt | 8 |
| Wasser | 5 |
| Weitere | 8 |