Perennial fodder cropping potentially increases subsoil biopore density by formation of extensive root systems and temporary soil rest. We will quantify root length density, earthworm abundance and biopore size classes after Medicago sativa, Cichorium intybus and Festuca arundinacea grown for 1, 2 and 3 years respectively in the applied research unit's Central Field Trial (CeFiT) which is established and maintained by our working group. Shoot parameters including transpiration, gas exchange and chlorophyll fluorescence will frequently be recorded. Precrop effects on oilseed rape and cereals will be quantified with regard to crop yield, nutrient transfer and H2-release. The soil associated with biopores (i.e. the driloshpere) is generally rich in nutrients as compared to the bulk soil and is therefore supposed to be a potential hot spot for nutrient acquisition. However, contact areas between roots and the pore wall have been reported to be low. It is still unclear to which extent the nutrients present in the drilosphere are used and which potential relevance subsoil biopores may have for the nutrient supply of crops. We will use a flexible videoscope to determine the root-soil contact in biopores. Nitrogen input into the drilosphere by earthworms and potential re-uptake of nitrogen from the drilosphere by subsequent crops with different rooting systems (oilseed rape vs. cereals) will be quantified using 15N as a tracer.
BACKGROUND: The Kingdom of Jordan belongs to the ten water scarcest countries in the world, and climate change is likely to increase the frequency of future droughts. Jordan is considered among the 10 most water impoverished countries in the world, with per capita water availability estimated at 170 m per annum, compared to an average of 1,000 m per annum in other countries. Jordan Government has taken the strategic decision to develop a conveyor system including a 325 km pipe to pump 100 million cubic meters per year of potable water from Disi-Mudawwara close to the Saudi Border in the south, to the Greater Amman area in the north. The construction of the water pipeline has started end of 2009 and shall be finished in 2013. Later on, the pipeline could serve as a major part of a national water carrier in order to convey desalinated water from the Red Sea to the economically most important central region of the country. The conveyor project will not only significantly increase water supplies to the capital, but also provide for the re-allocation of current supplies to other governorates, and for the conservation of aquifers. In the context of the Disi project that is co-funded by EIB two Environmental and Social Management Plans have been prepared: one for the private project partners and one for the Jordan Government. The latter includes the Governments obligation to re-balance water allocations to irrigation and to gradually restore the protected wetlands of Azraq (Ramsar site) east of Amman that has been depleted due to over-abstraction by re-directing discharge of highland aquifers after the Disi pipeline becomes operational. The Water Strategy recognizes that groundwater extraction for irrigation is beyond acceptable limits. Since the source is finite and priority should be given to human consumption it proposes to tackle the demand for irrigation through tariff adjustments, improved irrigation technology and disincentive to water intensive crops. The Disi aquifer is currently used for irrigation by farms producing all kinds of fruits and vegetables on a large scale and exporting most of their products to the Saudi and European markets and it is almost a third of Jordan's total consumption. The licenses for that commercial irrigation were finished by 2011/12. Whilst the licenses will be not renewed the difficulty will be the enforcement and satellite based information become an important supporting tool for monitoring. OUTLOOK: The ESA funded project Water management had the objective to support the South-North conveyor project and the activities of EIB together with the MWI in Jordan to ensure the supply of water for the increasing demand. EO Information provides a baseline for land cover and elevation and support the monitoring of further stages. usw.
Recent and predicted increases in extremely dry and hot summers emphasise the need for silvicultural approaches to increase the drought tolerance of existing forests in the short-term, before adaptation through species changes may be possible. We aim to investigate whether resistance during droughts, as well as the recovery following drought events (resilience), can be increased by allocating more growing space to individual trees through thinning. Thinning increases access of promoted trees to soil stored water, as long as this is available. However, these trees may also be disadvantaged through a higher transpirational surface, or the increased neighbourhood competition by ground vegetation. To assess whether trees with different growing space differ in drought tolerance, tree discs and cores from thinning experiments of Pinus sylvestris and Pseudotsuga menziesii stands will be used to examine transpirational stress and growth reduction during previous droughts as well as their subsequent recovery. Dendroecology and stable isotopes of carbon and oxygen in tree-rings will be used to quantify how assimilation rate and stomatal conductance were altered through thinning. The results will provide crucial information for the development of short-term silvicultural adaptation strategies to adapt forest ecosystems to climate change. In addition, this study will improve our understanding of the relationship between resistance and resilience of trees in relation to extreme stress events.
The proposal addresses the potential of subsoil to contribute to K nutrition of crops. More specifically we will address the processes controlling release of K from interlayer of 2:1 clay minerals as this is expected to be the dominant K fraction in the subsoil. While it has been shown in the past that this so called 'non-exchangeable' K can be released due to root activity, there are controversial results concerning the role of soil solution K concentration in the rhizosphere required to trigger the process. Likewise little information is available about the concentration dynamics of other cations (NH4, Ca) in the rhizosphere and their impact on K release and vermiculitization supposed to be associated with this process. Model studies with substrate from the central field trial will be conducted in compartment systems equipped with micro suction cups. The measurement of dynamic changes of soil solution composition with increasing distance from the root surface will be combined with investigations of changes in mineralogy by XRD, TEM and SEM-EDX. Changes of mineralogy as a result of plant induced K release from interlayer will also be studied on bulk soil and rhizosphere samples collected within the central field and the central microcosm experiment and with mineral bags exposed in the field during a cropping cycle. Finally, X-ray CT will be used to access changes in soil texture, i.e. clay distribution around roots and the temporal spread of roots in biopores which is a prerequisite for K uptake from such structures.
For surface soils, the mechanisms controlling soil organic C turnover have been thoroughly investigated. The database on subsoil C dynamics, however, is scarce, although greater than 50 percent of SOC stocks are stored in deeper soil horizons. The transfer of results obtained from surface soil studies to deeper soil horizons is limited, because soil organic matter (SOM) in deeper soil layers is exposed to contrasting environmental conditions (e.g. more constant temperature and moisture regime, higher CO2 and lower O2 concentrations, increasing N and P limitation to C mineralization with soil depth) and differs in composition compared to SOM of the surface layer, which in turn entails differences in its decomposition. For a quantitative analysis of subsoil SOC dynamics, it is necessary to trace the origins of the soil organic compounds and the pathways of their transformations. Since SOM is composed of various C pools which turn over on different time scales, from hours to millennia, bulk measurements do not reflect the response of specific pools to both transient and long-term change and may significantly underestimate CO2 fluxes. More detailed information can be gained from the fractionation of subsoil SOM into different functional pools in combination with the use of stable and radioactive isotopes. Additionally, soil-respired CO2 isotopic signatures can be used to understand the role of environmental factors on the rate of SOM decomposition and the magnitude and source of CO2 fluxes. The aims of this study are to (i) determine CO2 production and subsoil C mineralization in situ, (ii) investigate the vertical distribution and origin of CO2 in the soil profile using 14CO2 and 13CO2 analyses in the Grinderwald, and to (iii) determine the effect of environmental controls (temperature, oxygen) on subsoil C turnover. We hypothesize that in-situ CO2 production in subsoils is mainly controlled by root distribution and activity and that CO2 produced in deeper soil depth derives to a large part from the mineralization of fresh root derived C inputs. Further, we hypothesize that a large part of the subsoil C is potentially degradable, but is mineralized slower compared with the surface soil due to possible temperature or oxygen limitation.
Early generation plant breeding trials are often laid out according to unreplicated designs. Replicated checks may be used for error control, for example in augmented designs based on an incomplete block design for checks which are augmented with unreplicated entries. Traditional augmented designs require considerable resources to be spent on genotypes that are not themselves of interest. Therefore, it has been suggested to replace checks with partially replicated entries, leading to so-called prep designs. In the present proposal we suggest combining both ideas to develop what we call augmented prep designs. A non-trivial design problem arises when trials are to be performed at multiple locations. The main challenge then is how to augment the blocks so as to balance the number of pairwise concurrences. This task can be tackled in different ways based on the use (-arrays which are well-known as the basis for (-designs in fully replicated experiments. Furthermore, we also explore the refinement of designs when analysis by spatial models is envisioned. Robustness of the designs to the presence of genotype-environment interaction is also investigated.
In the last decades agricultural policy has gained increasingly in complexity. Nowadays it influences the food and agricultural sector from the global market down to the farm level. Widespread research questions, like the impact of the WTO negotiations on the farm structure, most often require comprehensive modeling frameworks. Thus, different types of models are utilized according to their comparative advantages and combined in a strategically useful way to more accurately represent micro and macro aspects of the food and agricultural sector. Consequently, in recent years we have seen an increase in the development and application of model linkages. Given this background, the overall objective of this subproject is a systematic sensitivity analysis of model linkages that gradually involves more and more characteristics of the linkage and the corresponding transfer of results between models. In addition, the project aims to answer the following specific question: How does structural change at the farm level influence aggregate supply and technical progress? Under which conditions is it possible to derive macro-relationships from micro-relationships? How does the aggregation level influence the model results and how can possible problems be overcome? This procedure is used to quantify the effects and to derive conditions for optimal interaction of the connected models. The analysis is based on the general equilibrium model GTAP (Global Trade Analysis Project) and the farm group model FARMIS (Farm Modelling Information System) which are employed in conjunction to analyze the effects of WTO negotiations on the farm level.
Magnetic resonance tomography (MRT) on microcosm soil cores (200 mm Ø) used for CeMiX, comprising naturally stacked subsoil down to 700 mm plus topsoil from CeFiT, will be implemented at a laterally partially open Split 1.5 T magnet, with intended final in-plane spatial resolution of 200 Micro m. Three-dimensional biopore distributions and dynamics of their formation within the cores will be determined non-invasively and compared to complementing CT analyses of SP 2. One major aim is a non-invasive differentiation of the biopores into earthworm- and root system-originating ones and currently air-, water-, root- and earthwormfilled ones, based on NMR relaxation parameters. Attempts will additionally be made to classify different wall coatings of the biopores with regard to their water affinity. Dynamics of water distribution within the microcosm core and its biopore structures, starting from initial values taken from CeFiT (SP 3), will be documented with an in-plane resolution of 5 mm, in parallel to measurements of root growth dynamics for calculation of biomass and root surface area. Special emphasis will be put on the role of the plant root system for a re-distribution of water/D2O (and solutes) between different soil layers. Finally we will attempt MRT-controlled sample collection from the microcosm cores, to get - together with our research unit partners of SPs 4-8 - repeated access to minimally invasively acquired data on nutrient and microorganism distributions in concert with non-invasively collected water and root distribution data as a basis for dynamic modelling of water and solute circuits in SP 10. Beside the microcosm cores, flat rhizotrons as used in SP 3 will be employed to enable measurements of root and shoot hydrostatic pressure profiles with pressure probes, in addition to MRT measurements. In this way water distributions and corresponding driving forces and growth dynamics will be measured altogether in a minimally invasive manner.
Water is an intrinsic component of ecosystems acting as a key agent of lateral transport for particulate and dissolved nutrients, forcing energy transfers, triggering erosion, and driving biodiversity patterns. Given the drastic impact of land use and climate change on any of these components and the vulnerability of Ecuadorian ecosystems with regard to this global change, indicators are required that not merely describe the structural condition of ecosystems, but rather capture the functional relations and processes. This project aims at investigating a set of such functional indicators from the fields of hydrology and biogeochemistry. In particular we will investigate (1) flow regime and timing, (2) nutrient cycling and flux rates, and (3) sediment fluxes as likely indicators. For assessing flow regime and timing we will concentrate on studying stable water isotopes to estimate mean transit time distributions that are likely to be impacted by changes in rainfall patterns and land use. Hysteresis loops of nitrate concentrations and calculated flux rates will be used as functional indicators for nutrient fluxes, most likely to be altered by changes in temperature as well as by land use and management. Finally, sediment fluxes will be measured to indicate surface runoff contribution to total discharge, mainly influenced by intensity of rainfall as well as land use. Monitoring of (1) will be based on intensive sampling campaigns of stable water isotopes in stream water and precipitation, while for (2) and (3) we plan to install automatic, high temporal-resolution field analytical instruments. Based on the data obtained by this intensive, bust cost effective monitoring, we will develop the functional indicators. This also provides a solid database for process-based model development. Models that are able to simulate these indicators are needed to enable projections into the future and to investigate the resilience of Ecuadorian landscape to global change. For the intended model set up we will couple the Catchment Modeling Framework, the biogeochemical LandscapeDNDC model and semi-empirical models for aquatic diversity. Global change scenarios will then be analyzed to capture the likely reaction of functional indicators. Finally, we will contribute to the written guidelines for developing a comprehensive monitoring program for biodiversity and ecosystem functions. Right from the beginning we will cooperate with four SENESCYT companion projects and three local non-university partners to ensure that the developed monitoring program will be appreciated by locals and stakeholders. Monitoring and modelling will focus on all three research areas in the Páramo (Cajas National Park), the dry forest (Reserva Laipuna) and the tropical montane cloud forest (Reserva Biologica San Francisco).
Im April 2012 führte PUMA das Rücknahmesystem Bring Me Back ein. Seither können Kunden in PUMA Stores weltweit gebrauchte Produkte zurückgeben, die dann durch die Firma I:CO der Weiterverwendung und Verwertung zugeführt werden. Auch die Produkte der neuen recyclefähigen und biologisch abbaubaren PUMA-InCycle-Kollektion, die seit März 2013 auf dem Markt sind, werden so erfasst. Hierzu gehört etwa das recycelbare PUMA Track Jacket, das zu 98 Prozent aus Polyester aus gebrauchten PET-Flaschen besteht. Der PUMA-Rucksack aus Polypropylen wird nach Gebrauch an den ursprünglichen Hersteller zurückgegeben, der das Material wieder zu neuen Rucksäcken verarbeitet. Durch solche Neuentwicklungen will PUMA seine Planungs- und Entscheidungsbasis verbessern. Deshalb hat sie bifa mit der Analyse abfallwirtschaftlicher Optionen für gebrauchte PUMA Produkte beauftragt. bifa untersuchte hierzu Referenzprodukte und Optionen für die Erfassung und Sortierung von Produkten und Materialien. 35 Pfade mit unterschiedlichen Verwertungs- und Beseitigungsansätzen wurden entwickelt und bewertet. Die Realisierungschancen der Pfade wurden dann dem zu erwartenden Nutzen insbes. für die Umwelt gegenübergestellt. Dabei wurde zwischen gut entwickelten und wenig entwickelten Abfallwirtschaften (Waste-Picking-Szenario W-P-Szenario) unterschieden. Es zeigte sich, dass Pfade, die im Szenario Abfallwirtschaft ökologisch nachteilig sind, im W-P-Szenario durchaus vorteilhaft sein können. Im W-P-Szenario sind zudem Pfade realisierbar, die in entwickelten Abfallwirtschaften keine Chance hätten. Die moderne Abfallverbrennung ist für W-P-Szenarien ökologisch vorteilhaft, aber dennoch eine schwierige Option. In entwickelten Abfallwirtschaften sollten Sammlung und Wiedereinsatz gebrauchter Schuhe und Textilien weiterentwickelt werden. Die folgenden generellen Empfehlungen wurden gegeben: - Der Einsatz von Recyclingmaterialien in PUMA-Produkten ist aus ökologischer Sicht zu empfehlen. Diese Erkenntnis wird auch durch die Ergebnisse der ersten ökologischen Gewinn-und-Verlust-Rechnung von PUMA belegt. Über die Hälfte aller Umweltauswirkungen entlang der gesamten Produktions- und Lieferkette des Unternehmens werden bei der Herstellung von Rohmaterialien verursacht - Das Produktdesign sollte auch für bestehende Verwertungspfade optimiert werden, da realistischerweise nur ein Teil der Produkte über das Sammelsystem erfasst werden kann - Die ökologischen Vorteile von Produkten, die aus nur einem Material bestehen, kommen nur dann zum Tragen, wenn das Produkt nach Gebrauch aussortiert und das Material tatsächlich recycelt wird - Biol. abbaubare Produkte können auch Nachteile haben, zum Beispiel die schnellere Entwicklung von klimaschädlichem Methan bei ungeordneter Deponierung - Eine Verlängerung der Produktlebensdauer über den gesamten Lebenszyklus einschl. der Verwendung als Gebrauchtprodukt ist der effektivste Weg, Umweltlasten zu reduzieren. Meth. Ökobilanzierung und Systemanalyse (Text gekürzt)
| Origin | Count |
|---|---|
| Bund | 229 |
| Type | Count |
|---|---|
| Förderprogramm | 229 |
| License | Count |
|---|---|
| offen | 229 |
| Language | Count |
|---|---|
| Deutsch | 38 |
| Englisch | 226 |
| Resource type | Count |
|---|---|
| Keine | 171 |
| Webseite | 58 |
| Topic | Count |
|---|---|
| Boden | 196 |
| Lebewesen und Lebensräume | 221 |
| Luft | 166 |
| Mensch und Umwelt | 229 |
| Wasser | 176 |
| Weitere | 229 |