Dieser Datensatz beinhaltet semantisch und strukturell harmonisierte Bohrdaten aus einem gesamten Bundesland der Bundesrepublik Deutschland, die von einem der Staatlichen Geologischen Dienste der Länder (SGD) bereitgestellt werden. In Deutschland sind die SGD für die Speicherung, Archivierung und Weitergabe der Informationen über alle mechanisch abgeteuften Bohrungen zuständig. Die Bohrungsdaten wurden überwiegend gemäß Geologiedatengesetz von Dritten an die SGD übermittelt. Sie können daher keine Gewähr für die Richtigkeit der Informationen übernehmen. Im Rahmen einer dauerhaften Kooperation werden die Bohrdaten in generalisierter Form über das Austauschformat BoreholeML bei der BGR zentral zusammengeführt und veröffentlicht. Der Geodatensatz beinhaltet Stammdaten zu jeder Bohrung sowie ggf. Bohrtechnik-, Schicht-, Ausbau-, Grundwasser-, Probendaten sowie ggf. deren Auswertung und gewonne Daten aus Bohrlochmessverfahren. Die gleichen Informationen sind auch abrufbar in der Bohrpunktkarte Deutschland unter https://boreholemap.bgr.de.
Die „Bohrpunktkarte Deutschland“ gibt mit ca. 2 Millionen enthaltenen Bohrungen (Gesamtlänge ca. 80.000 km) Auskunft über die Geologie des Untergrundes in der Bundesrepublik. Die Anwendung ist aus einer Kooperation zwischen der BGR mit den Staatlichen Geologischen Diensten Deutschlands (SGD) entstanden, die für die Verwaltung und langfristige Speicherung der gezeigten Bohrungsinformationen verantwortlich sind. Als Grundlage des länderübergreifenden Datenaustausches wurde das Format BoreholeML entwickelt, welches der gemeinsame Nenner aller Bohrdaten in Deutschland ist und Interoperabilität gewährleistet. Die Anwendung zeigt Bohrungsstammdaten, Schichtdaten, Grundwassermessungen, Nachweise über Logmessungen und über Beprobungen, Verrohrung bzw. Ausbaudaten und Bohrtechnikdaten. Damit eignen sich die Daten z.B. für Baugrunduntersuchungen, Brunnenbau oder Leitungsbau. Eine Recherche- und eine Exportfunktion arbeiten auf Stammdatenebene. Die Anwendung startet mit einer gekachelten Sicht auf die Bohrdichteverteilung, die ab einem Maßstab 1:80.000 zur Einzelansicht der Bohrungen wechselt. Die Daten werden in unregelmäßigen Abständen aktualisiert. Leider haben sich noch nicht sämtliche SGD der Anwendung angeschlossen.
The GK2750 Geology (INSPIRE) represents the surface geology of Germany and adjacent areas on a scale of 1:2,750,000. According to the Data Specification on Geology (D2.8.II.4_v3.0) the content of the geological map is stored in three INSPIRE-compliant GML files: GK2750_GeologicUnit.gml contains the geologic units, GK2750_GeologicStructure.gml comprises the faults and GK2750_NaturalGeomorphologicFeature.gml represents the marginal position of the ice shield and the impact crater Nördlinger Ries. The GML files together with a Readme.txt file are provided in ZIP format (GK2750-INSPIRE.zip). The Readme.text file (German/English) contains detailed information on the GML files content. Data transformation was proceeded by using the INSPIRE Solution Pack for FME according to the INSPIRE requirements.
Dieser Datensatz beinhaltet semantisch und strukturell harmonisierte Bohrdaten aus einem gesamten Bundesland der Bundesrepublik Deutschland, die von einem der Staatlichen Geologischen Dienste der Länder (SGD) bereitgestellt werden. In Deutschland sind die SGD für die Speicherung, Archivierung und Weitergabe der Informationen über alle mechanisch abgeteuften Bohrungen zuständig. Die Bohrungsdaten wurden überwiegend gemäß Geologiedatengesetz von Dritten an die SGD übermittelt. Sie können daher keine Gewähr für die Richtigkeit der Informationen übernehmen. Im Rahmen einer dauerhaften Kooperation werden die Bohrdaten in generalisierter Form über das Austauschformat BoreholeML bei der BGR zentral zusammengeführt und veröffentlicht. Der Geodatensatz beinhaltet Stammdaten zu jeder Bohrung sowie ggf. Bohrtechnik-, Schicht-, Ausbau-, Grundwasser-, Probendaten sowie ggf. deren Auswertung und gewonne Daten aus Bohrlochmessverfahren. Die gleichen Informationen sind auch abrufbar in der Bohrpunktkarte Deutschland unter https://boreholemap.bgr.de.
Dieser Datensatz beinhaltet semantisch und strukturell harmonisierte Bohrdaten aus zwei Bundesländern der Bundesrepublik Deutschland, die von einem Staatlichen Geologischen Dienst der Länder (SGD) bereitgestellt werden. In Deutschland sind die SGD für die Speicherung, Archivierung und Weitergabe der Informationen über alle mechanisch abgeteuften Bohrungen zuständig. Die Bohrungsdaten wurden überwiegend gemäß Geologiedatengesetz von Dritten an die SGD übermittelt. Sie können daher keine Gewähr für die Richtigkeit der Informationen übernehmen. Im Rahmen einer dauerhaften Kooperation werden die Bohrdaten in generalisierter Form über das Austauschformat BoreholeML bei der BGR zentral zusammengeführt und veröffentlicht. Der Geodatensatz beinhaltet Stammdaten zu jeder Bohrung sowie ggf. Bohrtechnik-, Schicht-, Ausbau-, Grundwasser-, Probendaten sowie ggf. deren Auswertung und gewonne Daten aus Bohrlochmessverfahren. Die gleichen Informationen sind auch abrufbar in der Bohrpunktkarte Deutschland unter https://boreholemap.bgr.de.
The GBL (INSPIRE) represents mechanically drilled boreholes approved by the State Geological Surveys of Germany (SGS). Most of the drilling data were not collected by the SGS, but were transmitted to SGS by third parties in accordance with legal requirements. Therefore, the SGS can accept no responsibility for the accuracy of the information. According to the Data Specification on Geology (D2.8.II.4_v3.0) the boreholes of each federal state are stored in one INSPIRE-compliant GML file. The GML file together with a Readme.txt file is provided in ZIP format (e.g. GBL-INSPIRE_Lower_Saxony.zip). The Readme.txt file (German/English) contains detailed information on the GML file content. Data transformation was proceeded by using the INSPIRE Solution Pack for FME according to the INSPIRE requirements.
The GK2000 Geologie (INSPIRE) represents the surface geology of Germany on a scale of 1:2,000,000. According to the Data Specification on Geology (D2.8.II.4_v3.0) the content of the geological map is stored in three INSPIRE-compliant GML files: GK2000_Geology_GeologicUnit.gml contains the geologic units, GK2000_Geology_GeologicStructure.gml comprises the faults and GK2000_Geology_GeomorphologicFeature.gml represents the marginal position of the ice shield as well as the impact craters Nördlinger Ries and Steinheimer Becken. The GML files together with a Readme.txt file are provided in ZIP format (GK2000_Geologie-INSPIRE.zip). The Readme.text file (German/English) contains detailed information on the GML files content. Data transformation was proceeded by using the INSPIRE Solution Pack for FME according to the INSPIRE requirements.
The GK1000 (INSPIRE) represents the surface geology of Germany and adjacent areas on a scale of 1:1,000,000. According to the Data Specification on Geology (D2.8.II.4_v3.0) the content of the geological map is stored in three INSPIRE-compliant GML files: GK1000_GeologicUnit.gml contains the geologic units, GK1000_GeologicStructure.gml comprises the faults and GK1000_NaturalGeomorphologicFeature.gml represents the marginal position of the ice shield. The GML files together with a Readme.txt file are provided in ZIP format (GK1000-INSPIRE.zip). The Readme.text file (German/English) contains detailed information on the GML files content. Data transformation was proceeded by using the INSPIRE Solution Pack for FME according to the INSPIRE requirements.
The GBL (INSPIRE) represents mechanically drilled boreholes approved by the State Geological Surveys of Germany (SGS). Most of the drilling data were not collected by the SGS, but were transmitted to SGS by third parties in accordance with legal requirements. Therefore, the SGS can accept no responsibility for the accuracy of the information. According to the Data Specification on Geology (D2.8.II.4_v3.0) the boreholes of each federal state are stored in one INSPIRE-compliant GML file. The GML file together with a Readme.txt file is provided in ZIP format (e.g. GBL-INSPIRE_Lower_Saxony. zip). The Readme.txt file (German/English) contains detailed information on the GML file content. Data transformation was proceeded by using the INSPIRE Solution Pack for FME according to the INSPIRE requirements.
The GBL (INSPIRE) represents mechanically drilled boreholes approved by the State Geological Surveys of Germany (SGS). Most of the drilling data were not collected by the SGS, but were transmitted to SGS by third parties in accordance with legal requirements. Therefore, the SGS can accept no responsibility for the accuracy of the information. According to the Data Specification on Geology (D2.8.II.4_v3.0) the boreholes of each federal state are stored in one INSPIRE-compliant GML file. The GML file together with a Readme.txt file is provided in ZIP format (e.g. GBL-INSPIRE_Lower_Saxony.zip). The Readme.txt file (German/English) contains detailed information on the GML file content. Data transformation was proceeded by using the INSPIRE Solution Pack for FME according to the INSPIRE requirements.
| Organisation | Count |
|---|---|
| Bund | 25 |
| Land | 24 |
| Wissenschaft | 1 |
| Type | Count |
|---|---|
| Förderprogramm | 1 |
| Hochwertiger Datensatz | 15 |
| unbekannt | 9 |
| License | Count |
|---|---|
| Geschlossen | 7 |
| Offen | 18 |
| Language | Count |
|---|---|
| Deutsch | 7 |
| Englisch | 18 |
| Resource type | Count |
|---|---|
| Archiv | 17 |
| Datei | 19 |
| Keine | 1 |
| Webseite | 24 |
| Topic | Count |
|---|---|
| Boden | 25 |
| Lebewesen und Lebensräume | 25 |
| Luft | 1 |
| Mensch und Umwelt | 25 |
| Wasser | 3 |
| Weitere | 25 |