API src

Found 15 results.

Other language confidence: 0.95028129510367

Results of analogue tectonic models of rifting and tectonic lineament reactivation along the Main Ethiopian Rift

This data set includes results from a total of 13 analogue tectonic models aimed at simulating the activation of tectonic lineaments associated with the Main Ethiopian Rift in eastern Africa. We use a model set-up based on previous work by Zwaan et al. (2021, 2022). This set-up involves a velocity discontinuity (VD, i.e., the edge of a mobile base plate) to induce extension in the overlying brittle- and viscous model materials representing the upper and lower crust, respectively. Additional structural weaknesses (seeds) at the base of the brittle layer serve to represent activated tectonic weaknesses in nature. Model parameters (different VD and seed orientation, and different seed diameters) are summarized in Table 1. The model results presented in this data publication are obtained through Digital Image Correlation (DIC) and Structure-from-Motion (SfM) analyses. A more detailed description of model set-up, model results, and their interpretation can be found in Zwaan et al. (2025)

A database of analogue models and geophysical data investigating caldera resurgence; DynamiCal project

In this dataset we provide data for 6 experimental models of caldera collapse and subsequent resurgence monitored through geophysical sensors (a force or “impact sensor”, Piezotronics PCB 104 200B02 and a Triaxial piezoelectric accelerometer, Model 356B18). The analogue modelling experiments were carried out at the TOOLab (Tectonic Modelling Laboratory), which is a joint laboratory between the Istituto di Geoscienze e Georisorse of the Consiglio Nazionale delle Ricerche, Italy and the Department of Earth Sciences of the University of Florence. The laboratory work that produced these data was partly supported by the European Plate Observing System (EPOS), by the Joint Research Unit (JRU) EPOS Italia and by the “Monitoring Earth's Evolution and Tectonics” (MEET) project (NextGenerationEU). Specifically, this work was performed in the frame of the DynamiCal project, funded by the 2° TNA-NOA call of the ILGE-MEET project.

A database of analogue models documenting fault reactivation during multiphase extension.

In this dataset we provide top-view photos and perspective photos (to create topographic data, i.e. Digital Elevation Models, DEMs) documenting analogue model deformation. For more details on modelling setup, experimental series Wang et al. (2021), to which this dataset is supplementary material. For details on analogue materials refer to Del Ventisette et al., 2019, Maestrelli et al. (2020). The analogue modelling experiments were carried out at the TOOLab (Tectonic Modelling Laboratory) of the Institute of Geosciences and Earth Resources of the National Research Council of Italy, Italy, and the Department of Earth Sciences of the University of Florence. The laboratory work that produced these data was supported by the European Plate Observing System (EPOS) and by the Joint Research Unit (JRU) EPOS Italia. Additional analysis, following the original work, was supported by the “Monitoring Earth’s Evolution and Tectonics” (MEET) project

Data and scripts from Neighbouring segments control on earthquake recurrence patterns: Insights from scaled seismotectonic models

We provide particle image correlation data from the 16 laboratory experiments with Foamquake seismotectonic model simulating analog megathrust seismic cycles and supporting scripts. To monitor analog seismic cycles, we use a high-resolution camera taking images at 50 frames per second as an analog of a geodetic satellite. We are using a trench orthogonal surface velocity time series extracted from the central points located above the seismic asperities using Particle Image Velocimetry (PIV) method. The scripts and datasets are provided as supplementary materials to the article "Neighbouring segments control on earthquake recurrence patterns: Insights from scaled seismotectonic models" by Latypova et al., 2025. The data originate from analog experiments using the Foamquake seismotectonic model, designed at the Laboratory of Experimental Tectonics (LET) at Roma Tre University to replicate megathrust seismic cycles. Observations were recorded with a high-resolution camera, and surface velocity fields were extracted using the Particle Image Velocimetry (PIV) technique, which applies cross-correlation between consecutive frames.

Paleomagnetic data from Ferdows and Yazd, Central Iran

This dataset includes paleomagnetic data from 19 sampling sites, collected in central Iran during two sampling campaigns carried out in April 2011 (Yazd) and November 2011 (Ferdows). The data are supplement to Mattei et al. (2020). The sites were collected along two tectonic structures representative of the main tectonic features of central Iran: the Yazd fold system located in an area dominated by the occurrence of NNW-SSE oriented right-lateral strike slip faults, and the Ferdows fold system that developed at the western termination of the E–W left-lateral strike-slip Dasht-e-Bayaz fault. Paleomagnetic results show opposite vertical-axis rotations related to the different orientation and sense of movement of strike-slip fault systems, suggesting that in Central Iran the N–S oriented right-lateral and E–W oriented left-lateral strike-slip faults play significant roles in accommodating the Arabia-Eurasia convergence, by rotating counterclockwise and clockwise in the horizontal plane, respectively.

PIV and topographic analysis data from analogue experiments involving 3D structural inheritance and multiphase rifting

This data set includes videos depicting the surface evolution (time-lapse photographs and Particle Image Velocimetry or PIV analysis) of 38 analogue models, in five model series (A-E), simulating rift tectonics. In these experiments we examined the influence of differently oriented mantle and crustal weaknesses on rift system development during multiphase rifting (i.e. rifting involving changing divergence directions or -rates) using brittle-viscous set-ups. All experiments were performed at the Tectonic Modelling Laboratory of the University of Bern (UB). The brittle and viscous layers, representing the upper an lower crust, were 3 cm and 1 cm thick, respectively, whereas a mantle weakness was simulated using the edge of a moving basal plate (a velocity discontinuity or VD). Crustal weaknesses were simulated using “seeds” (ridges of viscous material at the base of the brittle layers that locally weaken these brittle layers). The divergence rate for the Model A reference models was 20 mm/h so that the model duration of 2:30 h yielded a total divergence of 5 cm (so that e = 17%, given an initial model width of ca. 30 cm). Multiphase rifting model series B and C involved both a slow (10 mm/h) and fast (100 mm/h) rifting phase of 2.5 cm divergence each, for a total of 5 cm of divergence over a 2:45 h period. Multiphase rifting models series D and E had the same divergence rates (20 mm/h) as the Series A reference models, but involved both an orthogonal (α = 0˚) and oblique rifting (α = 30˚) phase of 2.5 cm divergence each, for a total of 5 cm of divergence over a 2:30 h period. In our models the divergence obliquity angle α was defined as the angle between the normal to the central model axis and the direction of divergence. The orientation and arrangements of the simulated mantle and crustal weaknesses is defined by angle θ (defined as the direction of the weakness with respect to the model axis. An overview of model parameters is provided in Table 1, and detailed descriptions of the model set-up and results, as well as the monitoring techniques can be found in Zwaan et al. (2021).

Paleomagnetic data from Kope-Dagh, Northeast Iran

This dataset includes paleomagnetic data from 70 sampling sites, collected in northeastern Iran during two campaigns carried out in August 2016 and September 2017 (Table 1). The data are supplement to Mattei et al. (2019). Data allow to reconstruct the rotation history of the outer margin of the Eurasia-Arabia collision area represented by the Ala-Dagh, Binalud and Kopeh-Dagh mountain belts. The sampled formations are red beds units from the Lower Cretaceous Shurijeh Fm. and from the Middle-Upper Miocene Upper Red Fm (URF). Paleomagnetic results from all the sampled areas show a homogeneous amount of clockwise (CW) rotations measured in the above-mentioned Formations. These paleomagnetic results suggest that the oroclinal bending process that caused the curvature of Alborz mountain belt in north Iran after the Middle-Late Miocene, also extended to the Ala-Dagh, Binalud and Kopeh-Dagh mountain belts, at the north-eastern border of the Arabia-Eurasia deforming zone. This pattern of vertical axis rotations is inconsistent with the present-day kinematics of the northern Iranian blocks as described by seismicity and GPS data, suggesting that the tectonic processes responsible for the bending of northern Iran mountain chains are no longer active and that the westward motion of the South Caspian basin, and therefore the initiation of opposite strike-slip motion along the Ashk-Abad and Shahrud faults, occurred very recently (∼2My ago).

Images and videos of analogue centrifuge models exploring marginal flexure during rifting in Afar, East Africa

This data set includes images and videos depicting the evolution of deformation and topography in 17 analogue experiments of passive margin development, to better understand the ongoing tec-tonics along the western margin of Afar, East Africa. The tectonic background that forms the basis for the experimental design is described in Zwaan et al. 2020a-d, and references therein. The ex-periments, in an enhanced gravity field in a large-capacity centrifuge, examined the influence of brittle layer thickness, strength contrast, syn-rift sedimentation and oblique extension on a brittle-viscous system with a strong and weak viscous domain. All experiments were performed at the Tectonic Modelling Laboratory of the Istituto di Geoscience e Georisorse - Consiglio Nazionale delle Ricerche (CNR-IGG) and of the Earth Sciences Department of the University of Florence (CNR/UF). The brittle layer (sand) thickness ranged between 6 and 20 mm, the underlying viscous layer, split in a competent and weak domain (both viscous mixtures), was always 10 mm thick. Asymmetric extension was achieved by removing a 1.5 mm thick spacer at the side of the model at every time step, allowing the analogue materials to spread when en-hanced gravity was applied during a centrifuge run. Differential stretching of the viscous material creates flexure and faulting in the overlying brittle layer. Total extension amounted to 10.5 mm over 7 intervals for Series 1 models that aimed at un-derstanding generic passive margin development in a generic orthogonal extension setting, where-as up to 16.5 mm of extension was applied for the additional Series 2 models aiming to reproduce the tectonic phases in Afar. In models involving sedimentation, sand was filled in at time steps 2, 4 and 6 (i.e. after 3, 6 and 9 mm of extension). Detailed descriptions of the experiments, monitoring techniques and tectonic interpretation of the model results are presented in Zwaan et al. (2020a).

Supplementary material to "Machine Learning can predict the timing and size of analog earthquakes"

This data set includes the results of digital image correlation of one experiment on subduction megathrust earthquakes with interacting asperities performed at the Laboratory of Experimental Tectonics (LET) Univ. Roma Tre in the framework of AspSync, the Marie Curie project (grant agreement 658034) lead by F. Corbi in 2016-2017. Detailed descriptions of the experiments and monitoring techniques can be found in Corbi et al. (2017 and 2019) to which this data set is supplementary material. We here provide Digital Image Correlation (DIC) data relative to a 7 min long interval during which the experiment 
produces 40 seismic cycles with average duration of about 10.5 s (see Figure S1 in Corbi et al., 2019). The DIC analysis yields quantitative about the velocity field characterizing two consecutive frames, measured in this case at the model surface. For a detailed description of the experimental procedure, set-up and materials used, please refer to the article of Corbi et al. (2017) paragraph 2. This data set has been used for: a) studying the correlation between apparent slip-deficit maps and earthquake slip pattern (see Corbi et al., 2019; paragraph 4); and b) as input for the Machine Learning investigation (see Corbi et al., 2019; paragraph 5). Further technical information about the methods, data products and matlab scripts is proviced in the data description file. The list of files explains the file and folder structure of the data set.

Particle image velocimetry data from an analog seismo-tectonic model addressing the interaction between neighbor asperities

This dataset includes the results of Particle Image Velocimetry (PIV) of one experiment on subduction megathrust earthquakes (with interacting asperities) performed at the Laboratory of Experimental Tectonics (LET) Univ. Roma Tre in the framework of AspSync, the Marie Curie project (grant agreement 658034; https://aspsync.wordpress.com). Detailed descriptions of the experiments and monitoring techniques can be found in Corbi et al. (2017). This data set is from one experiment characterized by the presence of a 7 cm wide barrier separating two asperities with equal size, geometry and friction. Here we provide PIV data relative to a 16.3 min long interval during which the experiment produces 138 analog earthquakes with an average recurrence time of 7 s. The PIV analysis yields quantitative information about the velocity field characterizing two consecutive frames, measured in this case at the model surface. For a detailed description of the experimental procedure, set-up and materials used, please refer to the article of Corbi et al. (2017) paragraph 2. This data set has been used for: a) studying velocity variations (Fig. 2 in Corbi et al., 2021) and rupture patterns (Fig. 3a, b in Corbi et al., 2021) occurring during the velocity peak of one of the two asperities (aka trigger).

1 2