Other language confidence: 0.993258809883106
This dataset presents the raw data from one experimental series (named CCEX, i.e., Caldera Collapse under regional Extension) of analogue models performed to investigate the process of caldera collapse followed by regional extension. Our experimental series tested the case of perfectly circular collapsed calderas afterward stretched under regional extensional conditions, that resulted in elongated calderas. The models are primarily intended to quantify the role of regional extension on the elongation of collapsed calderas observed in extensional settings, such as the East African Rift System. An overview of the performed analogue models is provided in Table 1. Analogue models have been analysed quantitatively by means of photogrammetric reconstruction of Digital Elevation Model (DEM) used for 3D quantification of the deformation, and top-view photo analysis for qualitative descriptions. The analogue materials used in the setup of these models are described in Montanari et al. (2017), Del Ventisette et al. (2019), Bonini et al., 2021 and Maestrelli et al. (2021a,b).
The knowledge about the distribution of active faults is crucial for hazard assessment (Costa et al., 2020; Santibáñez et al., 2019; Wesnousky, 1986) but also provides insights into tectonic control on hydrological processes (Binnie et al., 2020; Jeffery et al., 2013; Pan et al., 2013) or georesource distribution (Goldsworthy & Jackson, 2000; Viguier et al., 2018). Furthermore, tectonically driven topographic uplift and its impact on climate (Armijo et al., 2015; Houston & Hartley, 2003; Rech et al., 2019; Zhisheng et al., 2001) can be better understood if a systematically mapped fault database exists. Here we present an active fault database, as well as the distribution of drainages, for an area between 18.50°S and 19.45°S in Northern Chile forearc, which were systematically mapped in the framework of the project “Cluster C05-Tectonic Geomorphology: Adaptation of drainage to tectonic forcing” of the CRC1211- Earth Evolution at the Dry Limit. The Central Andes forearc at this latitude is located at a highly tectonically active convergent margin and hosts major earthquakes not only on the plate boundary itself (e.g., Métois et al., 2016), but also in the overriding crust (e.g., Comte et al., 1999). It comprises, from west to east, the Coastal Cordillera, Longitudinal Valley and the Western Flank of the Altiplano, showing an impressive amount of topographic variability of ca. 4000 m. Nevertheless, Neogene crustal tectonic structures and surface deformation are poorly documented. The overall landscape appears as a gentle west-sloping pediplain dissected by deep transversal canyons (quebradas), which reach the current Pacific Ocean (Mortimer, 1980). The Longitudinal Valley is a sedimentary basin filled with 432 to 2000 m of Tertiary to Quaternary deposits derived from the Altiplano in the east as well as the Coastal Cordillera in the west (García et al., 2017). Its surface is composed by a multiphase planation surface called the Pacific Paleosurface (PPS), which distribution is suggested to be controlled by crustal tectonics (Evenstar et al., 2017). Depending on the low ratio of tectonic displacement rate to sedimentation rate, many active faults are hidden and only a specialized approach of high-resolution fault mapping, together with a morphometric analysis of the drainage pattern provides systematic information about the distribution of active faults, folds and related structures. The present fault database is the result of creating a comprehensive catalogue of faults classified by the age of last proven/probable tectonic activity. This is accompanied by a compilation of existing age data and a map of drainage pattern. These datasets were compiled in QGIS 3.16.5 (https://www.qgis.org) and are available as. gpkg for GIS applications and as .kml formats to be visualized in Google Earth.
Central Europe is an intraplate domain which is characterized by low to moderate seismicity with records of larger seismic events occurring in historical and recent times. These records of seismicity are restricted to just over one thousand years. This does not reflect the long seismic cycles in Central Europe which are expected to be in the order of tens of thousands of years. Therefore, we have developed a paleoseismic database (PalSeisDB) that documents the records of paleoseismic evidence (trenches, soft-sediment deformation, mass movements, etc.) and extends the earthquake record to at least one seismic cycle. It is intended to serve as one important basis for future seismic hazard assessments. In the compilation of PalSeisDB, paleoseismic evidence features are documented at 129 different locations in the area of Germany and adjacent regions. A brief explanation of the folder structure, file list and file contents included in the data publication of PalSeisDB is provided in the data description .A detailed explanation of the data collection, the content of the data files and the table headers is available (Hürtgen et al., 2020). A full list of source references for PalSeisDB is provided in Hürtgen (2017, Appendix 8.3, p. 128 ff) and also included in the zip folder here
This dataset includes the results of Particle Image Velocimetry (PIV) of one experiment on subduction megathrust earthquakes (with interacting asperities) performed at the Laboratory of Experimental Tectonics (LET) Univ. Roma Tre in the framework of AspSync, the Marie Curie project (grant agreement 658034; https://aspsync.wordpress.com). Detailed descriptions of the experiments and monitoring techniques can be found in Corbi et al. (2017). This data set is from one experiment characterized by the presence of a 7 cm wide barrier separating two asperities with equal size, geometry and friction. Here we provide PIV data relative to a 16.3 min long interval during which the experiment produces 138 analog earthquakes with an average recurrence time of 7 s. The PIV analysis yields quantitative information about the velocity field characterizing two consecutive frames, measured in this case at the model surface. For a detailed description of the experimental procedure, set-up and materials used, please refer to the article of Corbi et al. (2017) paragraph 2. This data set has been used for: a) studying velocity variations (Fig. 2 in Corbi et al., 2021) and rupture patterns (Fig. 3a, b in Corbi et al., 2021) occurring during the velocity peak of one of the two asperities (aka trigger).
The dataset contains a set of structural and non-structural attributes collected using the GFZ RRVS methodology in Kyrgyzstan and Tajikistan, within the framework of the projects EMCA (Earthquake Model Central Asia), funded by GEM, and "Assessing Seismic Risk in the Kyrgyz Republic", funded by the World Bank. The survey has been carried out between 2012 and 2016 using a Remote Rapid Visual Screening system developed by GFZ and employing omnidirectional images and footprints from OpenStreetMap. The attributes are encoded according to the GEM taxonomy v2.0 (see https://taxonomy.openquake.org). The following attributes are defined (not all are observable in the RRVS survey): code description lon longitude in fraction of degrees lat latitude in fraction of degrees object_id unique id of the building surveyed MAT_TYPE Material Type MAT_TECH Material Technology MAT_PROP Material Property LLRS Type of Lateral Load-Resisting System LLRS_DUCT System Ductility HEIGHT Height YR_BUILT Date of Construction or Retrofit OCCUPY Building Occupancy Class - General OCCUPY_DT Building Occupancy Class - Detail POSITION Building Position within a Block PLAN_SHAPE Shape of the Building Plan STR_IRREG Regular or Irregular STR_IRREG_DT Plan Irregularity or Vertical Irregularity STR_IRREG_TYPE Type of Irregularity NONSTRCEXW Exterior walls ROOF_SHAPE Roof Shape ROOFCOVMAT Roof Covering ROOFSYSMAT Roof System Material ROOFSYSTYP Roof System Type ROOF_CONN Roof Connections FLOOR_MAT Floor Material FLOOR_TYPE Floor System Type FLOOR_CONN Floor Connections. For each building an EMCA vulnerability class has been assigned following the fuzzy scoring methodology described in Pittore et al., 2018. The related class definition schema (as a .json document) is included in the data package.
Multi-resolution exposure model for seismic risk assessment in the Kyrgyz Republic. The model has been developed according to the methodology outlined in Pittore, Haas and Silva (2019) "Multi-resolution Probabilistic Modelling of Residential Exposure and Vulnerability for Seismic Risk Applications", Earthquake Spectra. The model is aggregated over a Central Voronoidal Tessellation (CVT) composed of 1'175 geo-cells covering the territory of the Kyrgyz Republic. The model integrates around 6'000 building observations (see related dataset Pittore et al. 2019). The following specific modelling parameters have been employed: Two exposure models are provided, with prior strength pw 10 and 100. Both models have epsilon=0.001 (see publication indicated in the metadata for details on the modelling process). For each geo-cell the model includes the expected number of buildings , total occupancy and replacement cost for each of the 15 building types defined in the EMCA taxonomy (see Pittore et al, 2019b), plus the buildings that are belonging to other, non specified typologies (described by building type OTH). Each geo-cell also includes the area of the geo-cell itself in squared km. The data package contains three components: 1) exposure models in .csv 2) exposure models in .xml - the file is encoded in NRML 0.5 format and is compatible with the GEM openquake processing engine 3) shapefile of the tessellation that aggregates the exposure model. The field "cell_id" is the linkage with the exposure models
Multi-resolution exposure model for seismic risk assessment in Kazakhstan. The model has been developed according to the methodology outlined in Pittore, Haas and Silva (2019) "Multi-resolution Probabilistic Modelling of Residential Exposure and Vulnerability for Seismic Risk Applications", Earthquake Spectra. The model is aggregated over a Central Voronoidal Tessellation (CVT) composed of geo-cells covering the territory of Kazakhstan (provided as a separate file). The model prior is based on user-elicited knowledge. The following specific modelling parameters have been employed: Two exposure models are provided, with prior strength pw 10 and 100. Both models have epsilon=0.001 (see publication indicated in the metadata for details on the modelling process). For each geo-cell the model includes the expected number of buildings , total occupancy and replacement cost for each of the 15 building types defined in the EMCA taxonomy (see Pittore et al, 2019b), plus the buildings that are belonging to other, non specified typologies (described by building type OTH). Each geo-cell also includes the area of the geo-cell itself in squared km. The data package contains three components: 1) exposure models in .csv 2) exposure models in .xml - the file is encoded in NRML 0.5 format and is compatible with the GEM openquake processing engine 3) shapefile of the tessellation that aggregates the exposure model. The field "cell_id" is the linkage with the exposure models
The dataset contains a set of structural and non-structural attributes collected using the GFZ RRVS methodology in Kyrgyzstan and Tajikistan, within the framework of the projects EMCA (Earthquake Model Central Asia), funded by GEM, and "Assessing Seismic Risk in the Kyrgyz Republic", funded by the World Bank. The survey has been carried out between 2012 and 2016 using a Remote Rapid Visual Screening system developed by GFZ and employing omnidirectional images and footprints from OpenStreetMap. The attributes are encoded according to the GEM taxonomy v2.0 (see https://taxonomy.openquake.org). The following attributes are defined (not all are observable in the RRVS survey): code, description: lon, longitude in fraction of degrees lat, latitude in fraction of degrees object_id, unique id of the building surveyed MAT_TYPE,Material Type MAT_TECH,Material Technology MAT_PROP,Material Property LLRS,Type of Lateral Load-Resisting System LLRS_DUCT,System Ductility HEIGHT,Height YR_BUILT,Date of Construction or Retrofit OCCUPY,Building Occupancy Class - General OCCUPY_DT,Building Occupancy Class - Detail POSITION,Building Position within a Block PLAN_SHAPE,Shape of the Building Plan STR_IRREG,Regular or Irregular STR_IRREG_DT,Plan Irregularity or Vertical Irregularity STR_IRREG_TYPE,Type of Irregularity NONSTRCEXW,Exterior walls ROOF_SHAPE,Roof Shape ROOFCOVMAT,Roof Covering ROOFSYSMAT,Roof System Material ROOFSYSTYP,Roof System Type ROOF_CONN,Roof Connections FLOOR_MAT,Floor Material FLOOR_TYPE,Floor System Type FLOOR_CONN,Floor Connections For each building an EMCA vulnerability class has been assigned following the fuzzy scoring methodology described in Pittore et al., 2018. The related class definition schema (as a .json document) is included in the data package.
Multi-resolution exposure model for seismic risk assessment in Tajikistan. The model has been developed according to the methodology outlined in Pittore, Haas and Silva (2020) "Multi-resolution Probabilistic Modelling of Residential Exposure and Vulnerability for Seismic Risk Applications", Earthquake Spectra (submitted). The model is aggregated over a Central Voronoidal Tessellation (CVT) composed of geo-cells covering the territory of Tajikistan (provided as a separate file). The model integrates around 1'000 building observations (see related dataset Pittore et al. 2019a). The following specific modelling parameters have been employed: Prior strength=10, 100 Epsilon=0.001 For each geo-cell the model includes the expected number of buildings , total occupancy and replacement cost for each of the 15 building types defined in the EMCA taxonomy (see Pittore et al, 2019b), plus the buildings that are belonging to other, non specified typologies (described by building type OTH). Each geo-cell also includes the area of the geo-cell itself in squared km. The data package contains three components: 1) exposure models in .csv 2) exposure models in .xml - the file is encoded in NRML 0.5 format and is compatible with the GEM openquake processing engine 3) shapefile of the tessellation that aggregates the exposure model. The field "cell_id" is the linkage with the exposure models
Multi-resolution exposure model for seismic risk assessment in Uzbekistan. The model has been developed according to the methodology outlined in Pittore, Haas and Silva (2019) "Multi-resolution Probabilistic Modelling of Residential Exposure and Vulnerability for Seismic Risk Applications", Earthquake Spectra. The model is aggregated over a Central Voronoidal Tessellation (CVT) composed of geo-cells covering the territory of Uzbekistan (provided as a separate file). The model prior is based on empirical observations in Kyrgyzstan and Tajikistan as well as user-elicited knowledge. The following specific modelling parameters have been employed: Two exposure models are provided, with prior strength pw 10 and 100. Both models have epsilon=0.001 (see publication indicated in the metadata for details on the modelling process). For each geo-cell the model includes the expected number of buildings , total occupancy and replacement cost for each of the 15 building types defined in the EMCA taxonomy (see Pittore et al, 2019b), plus the buildings that are belonging to other, non specified typologies (described by building type OTH). Each geo-cell also includes the area of the geo-cell itself in squared km. The data package contains three components: 1) exposure models in .csv 2) exposure models in .xml - the file is encoded in NRML 0.5 format and is compatible with the GEM openquake processing engine 3) shapefile of the tessellation that aggregates the exposure model. The field "cell_id" is the linkage with the exposure models
| Organisation | Count |
|---|---|
| Wissenschaft | 12 |
| Type | Count |
|---|---|
| unbekannt | 12 |
| License | Count |
|---|---|
| Offen | 12 |
| Language | Count |
|---|---|
| Englisch | 12 |
| Resource type | Count |
|---|---|
| Keine | 12 |
| Topic | Count |
|---|---|
| Boden | 5 |
| Lebewesen und Lebensräume | 3 |
| Mensch und Umwelt | 12 |
| Wasser | 1 |
| Weitere | 12 |