Other language confidence: 0.874636422821916
The dataset contains full 40Ar/39Ar geochronological data completed by multi-collector noble-gas mass spectrometry using the laser total fusion technique on sanidine separated from the Drachenfels trachyte (Drachenfels, Bad Godesberg, Germany). The Drachenfels sanidine represents a useful intra-laboratory reference material for laser work. The purpose of the dataset is to share updated intercalibration data for the intra-laboratory Drachenfels sanidine, relative to the widespread fluence monitors Alder Creek sanidine and Fish Canyon sanidine, that can be used in future 40Ar/39Ar geochronological studies. W. McIntosh (New Mexico Geochronology Research Laboratory, Socorro, NM), P. Renne (Berkeley Geochronology Center, Berkeley, CA) and J.R. Wijbrans (Vrije Universiteit Amsterdam, NL) kindly provided splits of FCs, ACs and DRA1, respectively. The Ar laserprobe facility was realized with the financial support of CNR. The CO2 laser system was acquired within the PNRR – Mission 4, “Education and Research” - Component 2, “From research to business” - Investment line 3.1, “Fund for the creation of an integrated system of research and innovation infrastructures” - Project IR0000025 MEET.
This data set was collected in the frame of the ICDP drilling project DIVE (Drilling the Ivrea-Verbano ZonE) to determine the thermal properties of lower crustal lithologies and their variabilities. Two boreholes were drilled, the first 5071_1_B (in Ornavasso, final depth: 578.5 m) intersects the amphibolite-facies metasedimentary succession of the Ivrea-Verbano Zone, and the second borehole 5071_1_A (in Megolo, final depth: 909.5 m) is located within the mafic complex. Thermal properties were measured on fresh drill cores from the two DIVE boreholes and surface samples collected from nearby outcrops. The data set comprises thermal conductivity (TC), thermal diffusivity (TD), and specific heat capacity (Cp) measurements as well as measurements on concentrations of heat producing elements (HPE) Uranium (U), Thorium (Th), and Potassium (K) and the calculated radiogenic heat production (A).
The 56 km long KTB Line 3 was recorded in 1985 as part of deep seismic reflection investigations for the DEKORP (German Continental Seismic Reflection Program) and KTB (German Continental Deep Drilling Program) projects. The network of lines consists of two DEKORP profiles, DEKORP 4N and its appendix 4Q, and six shorter KTB profiles, KTB 8501 – 8506, arranged in the form of a grid parallel and perpendicular to the main tectonic lineaments. The purpose of the investigations was to explore the planned target area for the Continental Deep Drilling Site in the Upper Palatinate with high-fold near-vertical incidence vibroseis acquisition. The main focus was on the crustal structure of the central Mid-European Variscides down to the Moho and the uppermost mantle and, in particular, on the suture between the Moldanubian Zone and the northward adjacent Saxothuringian Zone as well as on the metamorphic Zone of Erbendorf-Vohenstrauss. The array of the KTB profiles represents the pre-cursor of the 3-D seismic survey ISO 1989 (Integrated Seismics Oberpfalz). Details of the experiment, first results and interpretations were published by DEKORP Research Group (1987, 1988). Results discussed together with the drilling site were presented in a number of works which can be found in Emmermann & Wohlenberg (1989). The Technical Report of KTB 8503 gives complete information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The Saxothuringian represents the infill of a Cambro-Ordovician basin. The Moldanubian contains blocks of pre-Variscan crust and their Palaezoic cover. During the Variscan orogeny the Moldanubian crust was thrust toward the northwest over the Saxothuringian foreland. Both units were welded to one another by a low-pressure metamorphism accompanied by polyphase deformation (DEKORP Research Group, 1987, 1988). The WSW – ENE striking line KTB 8503 is located normally to the KTB lines 8504, 8505 and 8506 and to DEKORP 4N running ca. 16 km south of the KTB drill hole. As well as the lines KTB 8501 and 8502 the profile 8503 was arranged parallel to strike running across the NW-SE directed system of block-faults at the southwestern margin of the Bohemian Massif (DEKORP Research Group, 1988). In the southwest KTB 8503 crosses the Franconian Line, a fault zone which separates the crystalline Bohemian Massif from a foreland. Farther to the northeast KTB 8503 runs through metamorphic nappes and Variscan granites of the Erbendorf-Vohenstrauss-Zone.
The 42 km long KTB Line 6 was recorded in 1985 as part of deep seismic reflection investigations for the DEKORP (German Continental Seismic Reflection Program) and KTB (German Continental Deep Drilling Program) projects. The network of lines consists of two DEKORP profiles, DEKORP 4N and its appendix 4Q, and six shorter KTB profiles, KTB 8501 – 8506, arranged in the form of a grid parallel and perpendicular to the main tectonic lineaments. The purpose of the investigations was to explore the planned target area for the Continental Deep Drilling Site in the Upper Palatinate with high-fold near-vertical incidence vibroseis acquisition. The main focus was on the crustal structure of the central Mid-European Variscides down to the Moho and the uppermost mantle and, in particular, on the suture between the Moldanubian Zone and the northward adjacent Saxothuringian Zone as well as on the metamorphic Zone of Erbendorf-Vohenstrauss. The array of the KTB profiles represents the pre-cursor of the 3-D seismic survey ISO 1989 (Integrated Seismics Oberpfalz). Details of the experiment, first results and interpretations were published by DEKORP Research Group (1987, 1988). Results discussed together with the drilling site were presented in a number of works which can be found in Emmermann & Wohlenberg (1989). The Technical Report of KTB 8506 gives complete information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The Saxothuringian represents the infill of a Cambro-Ordovician basin. The Moldanubian contains blocks of pre-Variscan crust and their Palaezoic cover. During the Variscan orogeny the Moldanubian crust was thrust toward the northwest over the Saxothuringian foreland. Both units were welded to one another by a low-pressure metamorphism accompanied by polyphase deformation (DEKORP Research Group, 1987, 1988). The SSE-NNW trending line KTB 8506 runs from the Upper Palatinate Forest in the southeast to the Fichtel Mountains in the northwest. The line is located ca. 22 km northeast from the KTB drill site, nearly parallel to KTB 8504, KTB 8505 and DEKORP 4N and perpendicular to KTB 8501 – 8503. The profile was arranged to explore the Tirschenreuth-Mähring segment of the Saxothuringian/Moldanubian boundary region (DEKORP Research Group, 1988).
The 208 km long profile 3B/MVE (West) was recorded in 1990 as part of the joint seismic reflection venture DEKORP 1990-3/MVE (Muenchberg-Vogtland-Erzgebirge) between the two former German Republics shortly before their unification. The aim of DEKORP 1990-3/MVE was to explore the structure of the crust from the Rhenish Shield through the Bohemian Massif to the Ore Mountains. The entire profile consists of DEKORP 3A, DEKORP 3B/MVE (West) and its prolongation to the east DEKORP 3B/MVE (East). Its total length amounts to about 600 km. 24 short seismic cross lines and associated 3D blocks with single fold coverage were also recorded. The seismic survey of 3B/MVE (West) was performed to investigate the deep crustal structure and the transition zone between the Rhenohercynian and Saxothuringian units with high-fold near-vertical incidence vibroseis acquisition. The results were compared with the results from the surveys DEKORP 1 and DEKORP 2, running nearly parallel to the line 3B/MVE (West). Details of the 3B/MVE (West) experiment, its preliminary results and interpretations may be obtained from DEKORP Research Group (A) et al. (1994) and DEKORP Research Group (C) et al. (1994). The Technical Report of line 3B/MVE (West) gives complete information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The mainly NW-SE running DEKORP 3B/MVE (West) runs perpendicular to the Variscan strike direction and traverses the southern part of the Rhenohercynian unit with the Northern Phyllite Zone and the northern part of the Saxothuringian unit including the Mid-German Crystalline High. Starting in the Kellerwald the profile crosses the Hessian Depression, the Tertiary volcanic Rhoen Mountains and the Mesozoic of the Franconian Basin (DEKORP Research Group (C) et al., 1994). East of Staffelstein the profile turns to the east and ends on the Franconian Line, the southwestern boundary fault zone of the Bohemian Massif. The line 3B/MVE (West) is intersected by ten cross lines along the profile and by DEKORP 3A at its northwestern end. To the east the profile is extended by DEKORP 3B/MVE (East).
This dataset presents the raw data of an experimental series of analogue models performed to investigate the influence of inherited brittle fabrics on narrow continental rifting. This model series was performed to test the influence of brittle pre-existing fabrics on the rifting deformation by cutting the brittle layer at different orientations with respect to the extension direction. An overview of the experimental series is shown in Table 1. In this dataset we provide four different types of data, that can serve as supporting material and for further analysis: 1) The top-view photos, taken at different steps and showing the deformation process of each model; they can be used to interpret the geometrical characteristics of rift-related faults; 2) Digital Elevation Models (DEMs) used to reconstruct the 3D deformation of the performed analogue models, allowing for quantitative analysis of the fault pattern. 3) Short movies built from top-view photos which help to visualize the evolution of model deformation; 4) line-drawing of fault and fracture patters to be used for fault statistical quantification. Further details on the modelling strategy and setup can be found in Corti (2012), Maestrelli et al. (2020), Molnar et al. (2020), Philippon et al. (2015), Zwaan et al. (2021) and in the publication associated with this dataset. Materials used for these analogue models were described in Montanari et al. (2017) Del Ventisette et al. (2019) and Zwaan et al. (2020).
The Alps are one of the best studied mountain ranges in the world, yet significant unknowns remain regarding their crustal structure and density distribution at depth. Previous published interpretations of crustal features within the orogen have been primarily based upon 2D seismic sections, and those that do integrate multiple geo-scientific datasets in 3D, have either focused on smaller sub-sections of the Alps or included the Alps, in low resolution, as part of a much larger study area. Therefore the generation of a 3D, crustal scale, gravity constrained, structural model of the Alps and their forelands at an appropriate resolution has been created here to more accurately describe crustal heterogeneity in the region. The study area of this work focuses on a region of 660 km x 620 km covering the vast majority of the Alps and their forelands are included, with the Central and Eastern Alps and the northern foreland being the best covered regions. Surface Generation: All referenced data was integrated to constrain sub-surface lithospheric features including: previous regional scale gravitationally and seismically constrained models of the TRANSALP study area, the Upper Rhine Graben, the Mollasse Basin and the Po Basin; continental scale integrative best fit models (EuCRUST-07 and EPcrust); and seismic reflection depths from numerous published deep seismic surveys (e.g. ALP’75, EGT’86, ALP 2002 and EASI). The software package Petrel was used for the creation and visualisation of the modelled surfaces in 3D, representing the key structural and density contrasts within the region. All surfaces were generated with a grid resolution of 20 km x 20 km using Petrel’s convergent interpolation algorithm. During interpolation, a hierarchy of data source types was used in the case of contradiction between the different data sources and was as follows: 1. regional scale, gravitationally and seismically constrained models; 2. regional scale, seismically constrained models; 3. individual seismic reflection surfaces and interpreted sections; 4. continental scale, seismically constrained, integrative best fit models. No subduction interfaces were modelled. Topography and bathymetry were taken from ETOPO1 and the LAB from Geissler (2010). Gravity Modelling: The generated surfaces and the calculated free-air anomaly from the global gravity model EIGEN-6C4, at a fixed height of 6 km above the datum were used in the 3D gravity modelling software IGMAS+ for the constrained of lithospheric density distribution. The layers of the generated model were split laterally into domains of different density, to reflect the heterogeneous nature of the crust within the region. Densities used in the initial structural model were derived from empirical P wave velocity to density conversions (Brocher, 2005) from the input seismic data sources. The densities were then modified, through multiple iterations, until the resulting model produced a gravity field within ± 25 mGal of the observed one. Surfaces generated as part of the integration work were not modified. Files: The surface depths, thicknesses and densities of the model can be found as tab separated text files for each individual layer of the model (Unconsolidated Sediments, Consolidated Sediments, Upper Crust, Lower Crust and Lithospheric Mantle). The columns in each file are identical: the Easting is given in the “X COORD (UTM Zone 32N)”, Northing in the “Y COORD (UTM Zone 32N)”, the top surface depth of each layer is given as TOP (m.a.s.l), the thickness of each layer is given as THICKNESS (m), and the bulk density of that layer is given as DENSITY (Kg/m^3).
Despite the amount of research focused on the Alpine orogen, significant unknowns remain regarding the thermal field and long term lithospheric strength in the region. Previous published interpretations of these features primarily concern a limited number of 2D cross sections, and those that represent the region in 3D typically do not conform to measured data such as wellbore or seismic measurements. However, in the light of recently published higher resolution region specific 3D geophysical models, that conform to secondary data measurements, the generation of a more up to date revision of the thermal field and long term lithospheric yield strength is made possible, in order to shed light on open questions of the state of the orogen. The study area of this work focuses on a region of 660 km x 620 km covering the vast majority of the Alps and their forelands, with the Central and Eastern Alps and the northern foreland being the best covered regions.
The profile 2N was recorded in 1986 as part of the DEKORP project, the German deep seismic reflection program. The focus of the DEKORP project was on deep crustal and lithospheric structures and therefore originally not on structures at shallower depths. From today's perspective, however, this depth range is of great interest for a wide range of possible technical applications (including medium-depth and deep geothermal projects). The original data is published by Stiller et al. (2021). The southernmost 68 km of the 219 km long profile 2N were reprocessed on behalf of the Hessian Agency of Nature Conservation, Environment and Geology (HLNUG). The focus of the reprocessing was on improving the resolution / mapping of geological structures down to a depth of 6 km (approx. 3 s TWT) to describe the prolongation of faults and geological structures in more detail than in previous studies. In order to achieve these goals and in view of the fact that today's processing and evaluation methods have been improved considerably compared to the 1990‘s, a state-of-the-art reprocessing was implemented. In comparison with the original processing (Stiller et al. (2021)), more sophisticated processing steps like CRS (Common Reflection Surface) instead of CDP (Common Depth Point) stacking, turning-ray tomography and prestack time and depth migration were carried out. The reprocessing results of the DEKORP 2N survey comprise all datasets newly achieved in addition to the datasets from the original processing (Stiller et al. (2021)), i.e. (1) the migrated CRS image gathers as unstacked data, and (2) the pure CRS stack, the poststack-time as well as prestack-time and prestack-depth migrated sections as stacked data. Moreover, (3) all velocity models used for the different versions including (4) the separate first-break tomography inversion, are contained. All reprocessed data come in SEGY trace format, the final sections additionally in PDF graphic format. A reprocessing report is included as well as again all meta information for each domain (source, receiver, CDP) like coordinates, elevations, locations and static corrections combined in ASCII-tables for geometry assignment purposes. The DEKORP 2 survey, consisting of the three segments 86-2Q, 86-2N and 84-2S, starts in the sub-Variscan foredeep of the Münsterland Basin and ends in the Moldanubian region at the Danube. The central part crosses the Rhenish Massif (Rhenohercynian), the Spessart Mountains of the Mid-German Crystalline High (Saxothuringian) and the meteorite impact location of the "Nördlinger Ries". The 219 km long, SSE-NNW striking DEKORP 2N line provides a cross-section through the Rhenish Massif from the sub-Variscan Münsterland Basin in the north to the Rhenohercynian Taunus Mountains in the south. The profile is the northern continuation of DEKORP 2S, which intersects at profile km 7.72. The reprocessed datasets contain a sub-section of the entire 2N with a total length of 67.84 km of full CDP fold, covering the profile’s southern part through the state of Hesse. The DEKORP '86-2N profile is of particular interest to investigate the seismic resolution of the Rhenish Massif and its different structures, such as the Siegen anticline, the Dill syncline, and the Lahn anticline. In the most southern part, the profile reaches into the Rhenohercynian Taunus Mountains until the Taunus ridge. The seismic sections of 2N show clear, deep reaching reflections along the prolongation of the whole profile supporting newer theories of nappe structures in the hessian part of the Rhenish Massif. The reflections are more clearly visible than in the original processing. All visible structures are mainly SE-dipping reflections in the upper crust, which represent lithologic contrasts as well as thrust faults known from surface geology. In the lower crust highly reflective predominantly SE-dipping reflectors can be identified. Moho reflections are clearly identifiable and deepening to the NW.
The profile DEKORP 3B/MVE, consisting of the two segments West and East, was recorded in 1990 as part of the DEKORP project, the German deep seismic reflection program. The focus of the DEKORP project was on deep crustal and lithospheric structures and therefore originally not on structures at shallower depths. From today's perspective, however, this depth range is of great interest for a wide range of possible technical applications (including medium-depth and deep geothermal projects). The original data is published by Stiller et al. (2021). The westernmost 91 km of the 208 km long profile 3B (West) were reprocessed on behalf of the Hessian Agency of Nature Conservation, Environment and Geology (HLNUG). As a particularity, also a set of 18 cross-lines, each ca. 12 km in length and perpendicular to the main lines, were surveyed along DEKORP 3B/MVE to get information about possible cross-dips. Four of those short cross-lines were reprocessed in 2D as well. The focus of the reprocessing of the old data was on improving the resolution / mapping of geological structures down to a depth of 6 km (approx. 3 s TWT) to describe the prolongation of faults and geological structures in more detail than in previous studies. In order to achieve these goals and in view of the fact that today's processing and evaluation methods have been improved considerably compared to the 1990‘s, a state-of-the-art reprocessing was implemented. In comparison with the original processing (Stiller et al. (2021)), more sophisticated processing steps like CRS (Common Reflection Surface) instead of CDP (Common Depth Point) stacking, turning-ray tomography and prestack time and depth migration were carried out. The reprocessing results of the DEKORP 3B (West) survey comprise all datasets newly achieved in addition to the datasets from the original processing (Stiller et al. (2021)), i.e. (1) the migrated CRS image gathers as unstacked data, and (2) the pure CRS stack, the poststack-time as well as prestack-time and prestack-depth migrated sections as stacked data. Moreover, (3) all velocity models used for the different versions including (4) the separate first-break tomography inversion, are contained. Additionally, the results of the 2D-reprocessing of cross-lines Q21-Q24 are included. All reprocessed data come in SEGY trace format, the final sections additionally in PDF graphic format. A reprocessing report is included as well as again all meta information for each domain (source, receiver, CDP) like coordinates, elevations, locations and static corrections combined in ASCII-tables for geometry assignment purposes. The DEKORP 3 survey was a combined seismic survey investigating the Variscan structures of the Rhenohercynian and the Saxothuringian. Consisting of three seismic lines it starts in the Rhenohercynian Hessian Depression (DEKORP 3A), crosses the Saxothuringian Mid-German Crystalline High (DEKORP 3B/MVE (West)) and runs parallel to the northern margin of the Moldanubian (DEKORP 3B/MVE (East)). The 207.65 km long DEKORP 3B (West) profile trends NW-SE and intersects DEKORP 3A in the Tertiary volcanic field within the "Northern Phyllite Zone". It crosses the Hessian Depression of the Rhenohercynian, runs through the Rhön Tertiary volcanic province and the Mesozoic Franconian Basin to the Bohemian Massif. The line ends at the Franconian Line. The reprocessed datasets contain a sub-section of the entire 3B (West) profile with a total length of 90.8 km of full CDP coverage, covering the territory of the state of Hesse, i. e. from the profile’s starting point in the NW to the SE until the Rhön volcanic complex. The reprocessed part of 3B (West) is intersected by four short cross-lines along the profile at km 8.75, 32.6, 64.75, 84.35 and by DEKORP 3A at km 42.3. The DEKORP '90-3B profile is of particular interest to investigate the seismic resolution of the Hessian depression, the east-hessian Buntsandstein nappe as well as the tertiary volcanic fields of the Kellerwald and Rhön.
| Organisation | Count |
|---|---|
| Wissenschaft | 33 |
| Type | Count |
|---|---|
| unbekannt | 33 |
| License | Count |
|---|---|
| Offen | 33 |
| Language | Count |
|---|---|
| Englisch | 33 |
| Resource type | Count |
|---|---|
| Keine | 33 |
| Topic | Count |
|---|---|
| Boden | 24 |
| Lebewesen und Lebensräume | 31 |
| Luft | 1 |
| Mensch und Umwelt | 24 |
| Wasser | 2 |
| Weitere | 33 |