Other language confidence: 0.9731440633097908
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
The Time Series Station Spiekeroog (TSS) was setup in 2002, in the tidal inlet between the East Frisian Islands of Langeoog and Spiekeroog in the Southern German Bight, at position 53°45′01.0″ N, 007°40′16.3″ E. The aim was to ensure the continuous measurement of physical, biological, chemical and meteorological parameters, even under extreme weather conditions such as storms, ice, and storm surges. The TSS was financed as part of the Deutsche Forschungsgemeinschaft (DFG) research unit BioGeoChemistry of Tidal Flats and the Ministry for Science and Culture of the Land of Lower Saxony (MWK). Here, air temperature, air pressure, relative humidity, wind speed and wind direction were measured in the year 2009. All raw data were revised and corrected for steps as range, outliers and stationarity checks. A detailed description of the Time Series Station Spiekeroog, its structure and instrumentation can be found in Zielinski et al. (2022) and in Reuter et al. (2009).
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
Data sets contain vertical profiles of current velocity measured by upward-looking Nortek AquaPro Acoustic Doppler Current Profilers (ADCP) deployed at two stations, an oyster bank (6.899° lng/ 53.546° lat, -32cm N.N) and a sand bank (6.898° lng/ 53.545° lat, -78cm N.N.), at Randzel 1 oyster reef in the Wadden Sea. Oyster bank station was located at the western edge of oyster reef, while sand bank station was positioned approximately 80 m to the southwest on a sandy seabed for comparison.
The Time Series Station Spiekeroog (TSS) was setup in 2002, in the tidal inlet between the East Frisian Islands of Langeoog and Spiekeroog in the Southern German Bight, at position 53°45′01.0″ N, 007°40′16.3″ E. The aim was to ensure the continuous measurement of physical, biological, chemical and meteorological parameters, even under extreme weather conditions such as storms, ice, and storm surges. The TSS was financed as part of the Deutsche Forschungsgemeinschaft (DFG) research unit BioGeoChemistry of Tidal Flats and the Ministry for Science and Culture of the Land of Lower Saxony (MWK). Here, sea level, water temperature and conductivity were measured in the year 2020. All raw data were revised and corrected for steps as range, outliers and stationarity checks. Water temperature and conductivity were measured in five different depths (4 m, 5.5 m, 7.5 m, 9.5 m, 11.5 m below MSL). Due to marine biofouling at the sensors and accompanying drift of instruments, the measured water temperature and conductivity data were corrected via linear regression by using reference data. As the water column in this region is well mixed and the water depth of the measurements varies with the tide, data from all five depths were averaged and referenced to a water depth of 4 m. Absolute salinity was derived from conductivity, temperature and pressure data according to TEOS 10. Data were smoothed and a quality flag was assigned for water temperature and salinity. The quality flags refer to the standard for data quality control of SeaDataNet https://www.seadatanet.org/ (0 = raw data, 1 = good data, 2 = probably good data, 3 = questionable data). A detailed description of the Time Series Station Spiekeroog, its structure and instrumentation can be found in Zielinski et al. (2022) and in Reuter et al. (2009).
Data sets contain vertical profiles of current velocity measured by upward-looking Nortek AquaPro Acoustic Doppler Current Profilers (ADCP) deployed at two stations, an oyster bank (6.899° lng/ 53.546° lat, -32cm N.N) and a sand bank (6.898° lng/ 53.545° lat, -78cm N.N.), at Randzel 1 oyster reef in the Wadden Sea. Oyster bank station was located at the western edge of oyster reef, while sand bank station was positioned approximately 80 m to the southwest on a sandy seabed for comparison.
| Organisation | Count |
|---|---|
| Wissenschaft | 66 |
| Type | Count |
|---|---|
| Daten und Messstellen | 66 |
| License | Count |
|---|---|
| Offen | 66 |
| Language | Count |
|---|---|
| Englisch | 66 |
| Resource type | Count |
|---|---|
| Archiv | 1 |
| Datei | 65 |
| Topic | Count |
|---|---|
| Boden | 64 |
| Lebewesen und Lebensräume | 66 |
| Luft | 46 |
| Mensch und Umwelt | 66 |
| Wasser | 64 |
| Weitere | 66 |