API src

Found 7 results.

Other language confidence: 0.8643443434157364

Rheology of PDMS-plasticine mixtures from the Tectonic Modelling Laboratory at CNR-IGG and the University of Florence (Italy)

This dataset provides rheometric data of three PDMS-plasticine mixtures used for centrifuge experiments at the Tectonic Modelling Laboratory of CNR-IGG at the Department of Earth Sciences of the University of Florence (Italy). The test became necessary as older plasticines used in PDMS-plasticine mixtures characterized rheologically in Zwaan et al. (2020) became unavailable. The material samples have been analyzed at the Laboratory for Experimental Tectonics at GFZ Helmholtz Centre for Geosciences, Potsdam (HelTec) using an Anton Paar Physica MCR 301 rheometer in a plate-plate configuration at room temperature (21˚C). Rotational (controlled shear rate) tests with shear rates varying from 10^-4 to 1 s^-1 were performed. According to our rheometric analysis, the new materials cover a range of viscosities from 8E^+04 to 4E^+07 Pas. They exhibit shear thinning behavior with high power law exponents (n-number). For PP45-1, PP45-2 and PP100, the respective n-numbers are 10, 8 and 3 at shear rates above 10^-3s^-1 and around 2 below.

Datasets of analog modeling results for the V-shaped opening of the South China Sea: 3D DEMs and PIV results

This dataset compiles quantitative outputs from eight sandbox experiments conducted under different boundary conditions (differential extension, strong blocks, and a weak zone). It contains 3-D scanning–derived digital elevation models (DEMs) from the final stage of experiments simulating the V-shaped opening of the South China Sea. In addition, it includes particle image velocimetry (PIV) products at four extension states (25 mm, 50 mm, 75 mm, and 100 mm), together with the plotting codes used to generate the figures.

Rheological tests of viscous material mixtures used as lithosphere analogues

This dataset contains rheological and density measurements of viscous material mixtures used to simulate the lithosphere in analogue modeling of tectonic processes. Simulating lithospheric deformation occurring in nature over geological time scales requires appropriately scaled materials for the laboratory experiments. Here, we characterize viscous materials that can exhibit Newtonian and/or non-Newtonian behavior depending on the applied strain rate. We conducted rotational tests in controlled shear rate mode (i.e., shear rate was increased while keeping the temperature constant) and temperature ramp tests (i.e., temperature was varied while keeping temperature constant) on eight different materials, including pure Polydimethylsiloxane (PDMS), pure plastiline (Hartum Color Plaxtin Soft), and mixtures of these materials with fillers (iron powder and/or silicone oil). This publication results from work conducted under the transnational access/national open access action at the Laboratory of Experimental Tectonics of the University Roma Tre supported by WP3 ILGE - MEET project, PNRR - EU Next Generation Europe program, MUR grant number D53C22001400005.

Rheometric Analysis of Viscous Material Mixtures Used in the Tectonic Laboratory (TecLab) at Utrecht University, Netherlands

This dataset contains measurements of viscous and viscoelastic materials that are used for analogue modelling. Proper density and viscosity scaling of ductile layers in the crust and lithosphere, requires materials like Polydimethylsiloxane (PDMS), to be mixed with fillers and low viscoity silicone oils. Changing the filler content and filler material, the density, viscosity and power-law coefficient can be tuned according to the requirements. All materials contain a large amount of PDMS and all but one a small amount of an additional silicone oil. Adding plasticine or barium sulfate lead to shear thinning rheologies with power-law exponents of p<0.95. Adding corundum powder only has a minor effect on the power-law exponent. Some mixtures also have an apparent yield point but all are in the liquid state in the tested range. In general, the rheologies of the materials are very complex and in some cases strongly temperature dependent. However, in the narrow range of relevant strain rates, the behaviour is well defined by a power-law relation and thus found suitable for simulating ductile layers in crust and lithosphere.

Digital image correlation data and orthophotos from lithospheric-scale analogue experiments of orthogonal extension followed by shortening

This dataset includes the results of 5 lithospheric-scale, brittle-ductile analogue experiments of extension and subsequent shortening performed at the Geodynamic Modelling Laboratory at Monash University (Melbourne, Australia). Here we investigated (1) the influence of the mechanical stratification of the model layers on rift basins during extension and (2) the influence of these basins on shortening-related structures. This dataset consists of images and movies that illustrate the evolution of topography (i.e., model surface height) and cumulative and incremental axial strain during the experiments. Topography and strain measures were obtained using digital image correlation (DIC) which was applied to sequential images of the model surface. This dataset also includes orthophotos (i.e., orthorectified images) of the model surface, overlain with fault traces and basins that were interpreted using QGIS. The experiments are described in detail in Samsu et al. (submitted to Solid Earth), to which this dataset is supplementary.

Rheology of viscous materials from the CNR-IGG Tectonic Modelling Laboratory at the University of Florence (Italy)

This dataset provides rheometric data of three viscous materials used for centrifuge experiments at the Tectonic Modelling Laboratory of CNR-IGG at the Earth Sciences Department of the University of Florence (Italy). The first material, PP45, is a mixture of a silicone (Polydimethylsiloxane or PDMS SGM36) and plasticine (Giotto Pongo). The PDMS is produced by Dow Corning and its characteristics are described by e.g. Rudolf et al. 2016a,b). Giotto Pongo is produced by FILA (Italy). Both components are mixed following a weight ratio of 100:45, and the final mixture has a density of 1520 kg m3. The second material, SCA705 is a mixture of Dow Corning 3179 putty, mixed with fine corundum sand and oleic acid with a weight ratio of 100:70:05 and a resulting density of 1660 kg m3. The final material, SCA7020 consists of the same components as SCA705, but with a slightly higher oleic acid content reflected in the weight ratio of 100:70:20. The mixture’s density is 1620 kg m3. The material samples have been analyzed in the Helmholtz Laboratory for Tectonic Modelling (HelTec) at GFZ German Research Centre for Geosciences in Potsdam using an Anton Paar Physica MCR 301 rheometer in a plate-plate configuration at room temperature (20˚C). Rotational (controlled shear rate) tests with shear rates varying from 10-4 to 1 s-1 were performed. Additional temperature tests were run with shear rates between 10-2 to 10-1 s-1 for a temperature range between 15 and 30˚C. According to our rheometric analysis, the materials all exhibit shear thinning behavior, with high power law exponents (n-number) for strain rates below 10-2s-1, while power law exponents are lower above that threshold.For PP45, the respective n-numbers are 4.8 and 2.6, for SCA705 6.7 and 1.5, and for SCA7020 9.1 and 2.0. The temperature tests show decreasing viscosities with increasing temperatures with rates of -3.8, -1.4 and -1.9% per ˚K for PP45, SCA705 and SCA7020, respectively. An application of the materials tested can be found in Zwaan et al. (2020).

Data supplement to: New analogue materials for nonlinear lithosphere rheology, with an application to slab break-off

This dataset provides strain and strain rate data on mixtures of plasticine, silicone oils and iron powder that has been used in slab break-of analogue experiments in the Tectonic Laboratory (TecLab) at Utrecht University (NL) as an analogue for viscously deforming lithosphere. The materials have been analyzed in a creep and recovery test, applying a parallel plate setup using an AR-G2 rheometer (by TA Instruments).The materials can in general be described as viscoelastic materials with a power-law rheology (see previous work on plasticine-silicone polymer mixtures Weijermars [1986], Sokoutis [1987], Boutelier et al. [2008]). For a couple of the tested materials we find a complementary Newtonian behavior at the low end of the tested stress levels, with a transition to power-law behavior at increasing stress. Furthermore, the materials exhibit elastic and anelastic (recoverable) deformation. The corresponding paper (Broerse et al., 2018) describes the rheology, while this supplement describes the raw data and important details of the measurement setup. The raw data concerns mostly (uncorrected) strain and strain rate data. The rheometry has been performed at the Advanced Soft Matter group at the Department of Chemical Engineering, Delft University of Technology, The Netherlands.

1