Other language confidence: 0.9702758048041813
Strokkur is a pool geyser in southwest Iceland that erupts every 3.7 minutes. Eruptions start with a blue water bulge that soon turns white (bulge phase) before the water bubble bursts into a jetting water fountain (jet phase). We measured the bulge rising velocity and height and fountain rising velocity and height using video cameras and drones from GFZ and the accompanying ground motion using seismometers from the University of Potsdam. We publish the derived products from video data and seismic data here.
For the determination of the exact location and drilling geometry of the ICDP expedition 5071 DIVE (Drilling the Ivrea-Verbano zonE) phase 1 boreholes, we have carried out a series of active seismic experiments to image the subsurface at high resolution (Greenwood et al., 2024). The two drilling sites of DIVE phase 1 are located in the Ossola valley (Figure 1) in the Central part of the Ivrea-Verbano zone, one in Megolo di Mezzo (5071_1_A: IGSN ICDP5071EH10001, Münthener, 2024a) and the other near Ornavasso (5071_1_B: IGSN ICDP5071EH30001, Münthener, 2024a). A total of 4 seismic reflection surveys, one in Megolo, two in Ornavasso (Ornavasso primary and Or-navasso secondary), and a transect crossing from Premosello-Chiovenda south towards Megolo, make up the MicrO-SEIZE (MOS) data base. The MOS surveys were conducted over a period of 12 days mid to late June 2019, utilizing a 26,000 lb (12,247 kg) EnviroVibe2™ vibrator source. Survey planning utilised existing roads, pathways, and open grass fields to cover as much area as possible around the borehole sites, to reduce the envi-ronmental impact on cultivation, and to ease operation logistics. A full description of the data can be found in Greenwood et al. (2024) and the data description file accessible via the data download link.
This data repository contains electrical and seismic tremor measurements, thermal infrared imagery, atmospheric conditions and information on plume heights that were recorded and collected during the 2021 Tajogaite eruption on La Palma, Canary Islands, Spain. The 2021 Tajogaite eruption lasted from 19 September until 13 December 2021. The "data description" file provides more detailed information on each dataset and the way the data is formatted. The electrical data was recorded using a Biral Thunderstorm Detector BTD-200. This sensor was installed at two consecutive locations: BTD1 (28.635°N, 17.876389°W) recorded from 11-26 October 2021 and BTD2 (28.602365°N, 17.880475°W) recorded from 27 October 2021 until the end of the eruption. The volcanic tremor measurements were recorded at seismic station PLPI (28.5722°N, 17.8654°W), which was operated by the Instituto Volcanológico de Canarias. Here we provide the seismic tremor amplitudes within the Very Long Period (0.4-0.6 Hz) and the Long Period (1-5 Hz) frequency bands between 10 September and 20 December 2021. Thermal infrared videography of the explosive volcanic activity was done using an InfraTec HD thermal infrared (TIR) video camera. This camera was installed in El Paso (28.649361°N, 17.882279°W) and recorded almost continuously between 3-8 November 2021. Here we provide individual thermal infrared frames. Atmospheric conditions were obtained from weather balloon measurements at Güímar (station nr. 60018) on Tenerife, which were provided by the University of Wyoming, Department of Atmospheric Science (http://weather.uwyo.edu/). In addition, atmospheric data was collected from ground-based weather stations at El Paso and Roque de los Muchachos, which were operated by the State Meteorological Agency (AEMET) of Spain on La Palma. Information on the volcanic plume heights was obtained from both the Toulouse Volcanic Ash Advisory Center (https://vaac.meteo.fr/volcanoes/la-palma/) as well as the Plan de Emergencias Volcánicas de Canarias.
IGMAS+ is a software combining 3-D forward and inverse modeling, interactive visualization and interdisciplinary interpretation of potential fields and their applications under geophysical and geological data constrains. The software has a long history starting 1988 and has seen continuous improvement since then with input by many contributors. Since 2019, IGMAS+ is maintained and developed at The Helmholtz Centre Potsdam - GFZ German Research Centre for Geosciences by the staff of Section 4.5 – Basin Modelling and Section 5.2 – eScience Centre with strong ongoing support by H.-J. Götze and S. Schmidt from CAU Kiel. The official webpage of IGMAS+ is available at https://www.gfz-potsdam.de/igmas. Each major version of IGMAS+ is assigned with a DOI. Intermediate releases including changelog can be found at https://git.gfz-potsdam.de/igmas/igmas-releases/-/releases/. This is a collection DOI referring to all versions of IGMAS+. Links to each published version are redundantly available via the "Files" section and the Related Work section ("includes").
IGMAS+ is a software combining 3-D forward and inverse modeling, interactive visualization and interdisciplinary interpretation of potential fields and their applications under geophysical and geological data constrains. The software has a long history starting 1988 and has seen continuous improvement since then with input by many contributors. Since 2019, IGMAS+ is maintained and developed at The Helmholtz Centre Potsdam - GFZ German Research Centre for Geosciences by the staff of Section 4.5 – Basin Modelling and Section 5.2 – eScience Centre with strong ongoing support by H.-J. Götze and S. Schmidt from CAU Kiel. The official webpage of IGMAS+ is available at https://www.gfz-potsdam.de/igmas. Each major version of IGMAS+ is assigned with a DOI. Intermediate releases including changelog can be found at https://git.gfz-potsdam.de/igmas/igmas-releases/-/releases/.
The data present the intermediate to final results when we introduce a two-step fully Bayesian approach with coupled uncertainty propagation for estimating crustal isotropic and radial anisotropy models using Rayleigh and Love dispersion data along with receiver functions in Sri Lanka. In the first step, 2D surface wave tomography is used to generate period-wise ambient noise phase velocity maps for Rayleigh and Love waves along with their associated uncertainties. Here we provide the inter-station dispersion data (folder: 2024-003_1_Ke-et-al_interstation_surface_ dispersion_curves; ASCII) for the 2D surface wave tomography process, along with the results of the tomography, including the velocity maps (folder: 2024-003_Ke-et-al_2_velocity_map; ASCII). In addition, the results (folder: 2024-003_3_Ke-et-al_2Dmcmc_inversion_results) are available in MAT format, along with a MATLAB script to allow users to extract the data independently. In a second step, local surface wave dispersion and model errors are derived from the velocity maps. The surface wave dispersion receiver functions are jointly inverted to obtain the isotropic mean shear wave and radial anisotropy profiles as a function of depth at each station site. The input data (folder: 2024-003_Ke-et-al_4_inv_data; ASCII) of surface dispersion and receiver function for the inversion are presented here, as well as the final result model from the inversion (folder: 2024-003_Ke-et-al_5_model; ASCII and .dat formats).
This collection contains 10500 computationally generated, randomised 2D microstructures, their geometrical and electrical properties, and the Matlab software package used to calculate these properties. The two-phase microstructures (mineral matrix, pore space) represent three different pore space types (microfracture networks, intergranular pore space, oomoldic pore space) and are organised into 35 ensembles - with common modelling parameters - of 100 individual microstructure realisations each. For all realisations, several geometrical properties (percolation, total porosity, connected porosity, isolated porosity, surface area, fractal dimension) and physical properties (formation factor from electrical resistivity, electrical tortuosity) are given. The collection also includes a Matlab-based finite element simulation package derived from the FEMALY library, which can be used to compute the properties of any given 2D raster microstructure.
This data set includes broadband (1e-4 to 1e5 Hz) frequency-dependent, complex electrical conductivity data, which have been measured in the laboratory by means of the spectral induced polarization (SIP) method on 28 oriented black shale and mudstone samples. Porosity, density and plug images are provided as accompanying information. The rock material originates from the Moffat Shale Group sampled from two shallow boreholes in Monaghan County, Ireland. Among the plug samples, 9 oriented pairs are used to derive anisotropy information of the frequency-dependent, complex electrical conductivity. The data have been processed by means of a Debye decomposition approach. The anisotropy is then determined by utilizing the foliation dip angle assuming tilted transverse isotropic conditions.
We perform a teleseismic P-wave travel-time tomography to examine the geometry and structure of subducted lithosphere in the upper mantle beneath the Alpine orogen. The tomography is based on waveforms recorded at over 600 temporary and permanent broadband stations of the dense AlpArray Seismic Network deployed by 24 different European institutions in the greater Alpine region, reaching from the Massif Central to the Pannonian Basin and from the Po plain to the river Main. Teleseismic travel times and travel-time residuals of direct teleseismic P-waves from 331 teleseismic events of magnitude 5.5 and higher recorded between 2015 and 2019 by the AlpArray Seismic Network are extracted from the recorded waveforms using a combination of automatic picking, beamforming and cross-correlation. The resulting database contains over 162.000 highly accurate absolute P-wave travel times and travel-time residuals. For tomographic inversion, we define a model domain encompassing the entire Alpine region down to a depth of 600 km. Predictions of travel times are computed in a hybrid way applying a fast Tau-P method outside the model domain and continuing the wavefronts into the model domain using a fast marching method. We iteratively invert demeaned travel-time residuals for P-wave velocities in the model domain using a regular discretization with an average lateral spacing of about 25 km and a vertical spacing of 15 km. The inversion is regularized towards an initial model constructed from a 3D a priori model of the crust and uppermost mantle and a 1D standard earth model beneath. The resulting model provides a detailed image of slab configuration beneath the Alpine and Apenninic orogens. Major features are a partly overturned Adriatic slab beneath the Apennines reaching down to 400 km depth still attached in its northern part to the crust but exhibiting detachment towards the southeast. A fast anomaly beneath the western Alps indicates a short western Alpine slab whose easternmost end is located at about 100 km depth beneath the Penninic front. Further to the east and following the arcuate shape of the western Periadriatic Fault System, a deep-reaching coherent fast anomaly with complex internal stucture generally dipping to the SE down to about 400 km suggests a slab of European origin limited to the east by the Giudicarie fault in the upper 200 km but extending beyond this fault at greater depths. In its eastern part it is detached from overlying lithosphere. Further to the east, well-separated in the upper 200 km from the slab beneath central Alps but merging with it below, another deep-reaching, nearly vertically dipping high-velocity anomaly suggests the existence of a slab beneath the Eastern Alps of presumably the same origin which is completely detached from the orogenic root. The data are fully described in Paffrath et al. (2021). The model is provided as tabular data with six columns (1) Longitude (deg), (2) Latitude (deg), (3) Depth (km), (4) vp (km/s), (5) dVp (%), (6) Resolution.
The Collisional Orogeny in the Scandinavian Caledonides (COSC) scientific drilling project focuses on mountain building processes in a major mid-Paleozoic orogen in western Scandinavia and its comparison with modern analogues. The transport and emplacement of subduction-related highgrade continent-ocean transition (COT) complexes onto the Baltoscandian platform and their influence on the underlying allochthons and basement is being studied in a section provided by two fully cored 2.5 km deep drill holes. These operational data sets concern the second drill site, COSC-2 (boreholes ICDP 5054-2-A and 5054-2-B), drilled from mid April to early August 2020. COSC-2 is located approximately 20 km eastsoutheast of COSC-1, close to the southern shore of Lake Liten between Järpen and Mörsil in Jämtland, Sweden. COSC-2 drilling started at a tectonostratigraphic level slightly below that at COSC-1’s total depth. It has sampled the Lower Allochthon, the main Caledonian décollement and the underlying basement of the Fennoscandian Shield, including its Neoproterozoic and possibly older sedimentary cover. COSC-2 A reached 2276 m driller's depth with nearly 100 % core recovery between 100 m and total depth. COSC-2 B, with a driller’s depth of 116 m, covers the uppermost part of the section that was not cored in COSC-2 A. The operational data sets include the drill core documentation from the drilling information system (mDIS), full round core scans, MSCL data sets, a preliminary core description and the geophysical downhole logging data that were acquired during and subsequent to the drilling operations. All downhole logs and core depth were subject to depth correction to a common depth master (cf. operational report for detailed information). The COSC-2 drill core is archived at the Core Repository for Scientific Drilling at the Federal Institute for Geosciences and Natural Resources (BGR), Wilhelmstr. 25–30, 13593 Berlin (Spandau), Germany.
| Organisation | Count |
|---|---|
| Wissenschaft | 29 |
| Type | Count |
|---|---|
| unbekannt | 29 |
| License | Count |
|---|---|
| Offen | 26 |
| Unbekannt | 3 |
| Language | Count |
|---|---|
| Englisch | 29 |
| Resource type | Count |
|---|---|
| Keine | 29 |
| Topic | Count |
|---|---|
| Boden | 22 |
| Lebewesen und Lebensräume | 13 |
| Luft | 11 |
| Mensch und Umwelt | 27 |
| Wasser | 5 |
| Weitere | 29 |