API src

Found 47 results.

Related terms

Potentialgebiete zur Speicherung von Druckluft in Schleswig-Holstein

Die Karte zeigt Potentialgebiete zur Anlage von Druckluftspeichern in Salzskavernen im Schleswig-Holsteinischen Festlandsbereich und die Lage der Salzstrukturen im Untergrund. Zur Abgrenzung von untersuchungswürdigen Horizonten zur Druckluftspeicherung in Salzkavernen diente im Wesentlichen die Tiefenlage des Salzstockdaches (Top der Zechstein- und Rotliegend-Ablagerungen) bis 800 m unter NHN als maximal für die Aussolung von Kavernen vertretbare Tiefe (derzeitiger Kenntnisstand).

Digitalisierung und interdisziplinäre Auslegungstechnologien von Turbomaschinen für die Energiewende, Teilvorhaben: 2.1a, 2.2a und 2.3a

Das Projekt "Digitalisierung und interdisziplinäre Auslegungstechnologien von Turbomaschinen für die Energiewende, Teilvorhaben: 2.1a, 2.2a und 2.3a" wird/wurde gefördert durch: Bundesministerium für Wirtschaft und Klimaschutz. Es wird/wurde ausgeführt durch: MAN Energy Solutions SE.Das übergeordnete Arbeitspaket 'Speicher und H2-Anwendungen' des Verbundprojektes widmet sich Verdichtern und Expansionskomponenten für Anwendungen in Speicherprozessen für die zukünftige, von Erneuerbaren dominierte Energieinfrastruktur und in Prozessen der synthetischen Erzeugung klimaneutraler Brenngase. Im AP 2.1 'Radialverdichter in Energiespeicheranwendungen' werden Radialverdichter für die Anwendung in innovativen Energiespeicheranwendungen wie CAES (Compressed Air Energy Storage) ertüchtigt. Um dieser besonderen Anforderung von CAES zu begegnen ist es daher erforderlich, die Auswirkung von Strömungsungleichförmigkeiten am Verdichtereintritt zu bewerten und aerodynamisch robuste Laufräder, die im flexiblen Betrieb möglichst unempfindlich auf eine ungleichförmige Beaufschlagung reagieren, zu entwickeln. Das AP 2.2 'Radialexpander in Energiespeicheranwendungen' widmet sich dem Expansionspfad von Energiespeichern, die auf den Prinzipien der Kompression und Expansion von Gasen arbeiten. Hier kommen mehrstufige Radialexpander zum Einsatz, wobei je nach der Art des Energiespeichers unterschiedliche Fluide für den Prozess in Betracht kommen. Dies hat Auswirkungen auf die genaue Gestaltung der aerodynamischen Komponenten. Schließlich werden im AP 2.3 'Axialexpander: Maschinenoptimierung für Speicherungsprozesse' Turbomaschinen für Prozesse für eine möglichst verlustarme Einlagerung (Einspeisung) und eine schnelle Entladung von Gasen entwickelt. Neben der direkten Nutzung der Exergie des gespeicherten Wasserstoffs wird in einem mit CO2 arbeitenden geschlossenen Kreislaufprozess CO2 auf den überkritischen Zustand (sCO2 - super critical CO2) komprimiert. Der Antrieb des Kompressors wird durch eine kleine Expansionsturbine unterstützt, die die nach der Wärmespeicherung enthaltene Restenthalpie entspannt. Besteht Strombedarf in wind- bzw. sonnenfreier Zeit, so erfolgt die Rückgewinnung elektrischer Energie durch die Entspannung des sCO2 über eine Turbine.

Entwicklung einer neuartigen hocheffizienten Wickeltechnologie für Druckbehälter am Beispiel eines skalierbaren Druckluftspeichers für mobile Anwendungsbereiche, Teilvorhaben: Entwicklung eines skalierbaren Typ-V-Druckluftspeichers für mobile Anwendungen

Das Projekt "Entwicklung einer neuartigen hocheffizienten Wickeltechnologie für Druckbehälter am Beispiel eines skalierbaren Druckluftspeichers für mobile Anwendungsbereiche, Teilvorhaben: Entwicklung eines skalierbaren Typ-V-Druckluftspeichers für mobile Anwendungen" wird/wurde gefördert durch: Bundesministerium für Wirtschaft und Klimaschutz. Es wird/wurde ausgeführt durch: Frauenthal Airtank Elterlein GmbH.

Entwicklung einer neuartigen hocheffizienten Wickeltechnologie für Druckbehälter am Beispiel eines skalierbaren Druckluftspeichers für mobile Anwendungsbereiche, Teilvorhaben: Entwicklung der Fertigungstechnologie für Typ-V-Polkappen mit integrativer Fügestruktur

Das Projekt "Entwicklung einer neuartigen hocheffizienten Wickeltechnologie für Druckbehälter am Beispiel eines skalierbaren Druckluftspeichers für mobile Anwendungsbereiche, Teilvorhaben: Entwicklung der Fertigungstechnologie für Typ-V-Polkappen mit integrativer Fügestruktur" wird/wurde gefördert durch: Bundesministerium für Wirtschaft und Klimaschutz. Es wird/wurde ausgeführt durch: BRAND Werkzeug- und Maschinenbau GmbH.

Solare Energien für klimaneutrale Bestandsquartiere - ein ganzheitlicher Systemansatz am Beispiel des historischen Adlerareals, Teilvorhaben: Arealkonforme Entwicklung und Umsetzung von Druckluftspeichersystemen

Das Projekt "Solare Energien für klimaneutrale Bestandsquartiere - ein ganzheitlicher Systemansatz am Beispiel des historischen Adlerareals, Teilvorhaben: Arealkonforme Entwicklung und Umsetzung von Druckluftspeichersystemen" wird/wurde gefördert durch: Bundesministerium für Wirtschaft und Klimaschutz. Es wird/wurde ausgeführt durch: g4a GmbH.Im Vorhaben 'SEKB-Adlerareal' werden bekannte wie auch in Teilen weiter oder neu zu entwickelnden Komponenten zur Gewinnung, Nutzung und Speicherung von Umweltenergien zum Einsatz gebracht und durch eine thermische und intelligente Vernetzung zusammengeführt, um in einem systemischen Gesamtansatz die klimaneutrale Wärmeversorgung des 'Kleinstquartiers Adlerareal' zu realisieren. Ziel ist es, die aufeinander auf die gebäude- und quartiersspezifischen Systemanforderungen abzustimmenden Komponenten so anzupassen, weiterzuentwickeln, realmaßstäblich zu skalieren und umzusetzen, dass nicht nur eine bilanzielle, sondern eine über den ganzen Jahresverlauf hinweg klimaneutrale Versorgung des Kleinstquartiers auf der Basis der Gewinnung, Nutzung und Speicherung der auf dem Gelände des 'Adlerareals' verfügbaren erneuerbaren Energien sicherzustellen. Die g4a GmbH trägt mit der Weiterentwicklung und Anpassung eines elektrischen Speichersystems zur Umsetzung der Vorhabenziele bei und wird hierbei einen bereits als prototypische Entwicklung realisierten und mit Patentrechten geschützten hydraulisch-pneumatischen Druckluftenergiespeicher von 7 kWhel auf eine für das Vorhaben erforderliche Speicherkapazität von 15 MWhel skalieren. Zudem werden maschinentechnische Weiterentwicklungen, die bereits von der g4a mit Schutzrechten versehen wurden, vornehmen, um eine Optimierung des Wirkungsgrads von Strom-zu-Strom auf über 40 % anzuheben. Die im Adlerareal vorgesehene Einbindung des neuartigen Druckluftenergiespeichers in einem ganzheitlichen Quartierskonzept bietet der g4a GmbH vielfältige Möglichkeiten, im realen Betrieb des Speichersystems nicht nur dessen Funktionsfähigkeit und hohe Effizienz mit der Nutzung der Prozesswärme für die Gebäudebeheizung unter Beweis zu stellen, sondern erlaubt auch die Potenziale Netzdienlichkeit des elektrischen Speichers zu analysieren.

Entwicklung einer neuartigen hocheffizienten Wickeltechnologie für Druckbehälter am Beispiel eines skalierbaren Druckluftspeichers für mobile Anwendungsbereiche, Teilvorhaben:Entwicklung eines adaptiven und effizienten Breitbandwicklverfahrens zur Herstellung skalierbarer FKV-Zylinder

Das Projekt "Entwicklung einer neuartigen hocheffizienten Wickeltechnologie für Druckbehälter am Beispiel eines skalierbaren Druckluftspeichers für mobile Anwendungsbereiche, Teilvorhaben:Entwicklung eines adaptiven und effizienten Breitbandwicklverfahrens zur Herstellung skalierbarer FKV-Zylinder" wird/wurde gefördert durch: Bundesministerium für Wirtschaft und Klimaschutz. Es wird/wurde ausgeführt durch: Tisora Sondermaschinenbau GmbH.

Entwicklung einer neuartigen hocheffizienten Wickeltechnologie für Druckbehälter am Beispiel eines skalierbaren Druckluftspeichers für mobile Anwendungsbereiche

Das Projekt "Entwicklung einer neuartigen hocheffizienten Wickeltechnologie für Druckbehälter am Beispiel eines skalierbaren Druckluftspeichers für mobile Anwendungsbereiche" wird/wurde ausgeführt durch: Frauenthal Airtank Elterlein GmbH.

Entwicklung einer neuartigen hocheffizienten Wickeltechnologie für Druckbehälter am Beispiel eines skalierbaren Druckluftspeichers für mobile Anwendungsbereiche, Teilvorhaben: Entwicklung eines Fügeprozesses für Typ-V-Druckluftspeichers aus individuellen Wickelhalbzeugen

Das Projekt "Entwicklung einer neuartigen hocheffizienten Wickeltechnologie für Druckbehälter am Beispiel eines skalierbaren Druckluftspeichers für mobile Anwendungsbereiche, Teilvorhaben: Entwicklung eines Fügeprozesses für Typ-V-Druckluftspeichers aus individuellen Wickelhalbzeugen" wird/wurde gefördert durch: Bundesministerium für Wirtschaft und Klimaschutz. Es wird/wurde ausgeführt durch: Technische Universität Chemnitz, Institut für Strukturleichtbau (IST), Professur Strukturleichtbau und Kunststoffverarbeitung.

INSPIRE: Information system salt: planning basis, selection criteria and estimation of the potential for the construction of salt caverns for the storage of renewable energies (hydrogen and compressed air) - double saline and flat salt layers (InSpEE-DS) (WMS)

Which salt formations are suitable for storing hydrogen or compressed air? In the InSpEE-DS research project, scientists developed requirements and criteria for the assessment of suitable sites even if their exploration is still at an early stage and there is little knowledge of the salinaries’ structures. Scientists at DEEP.KBB GmbH in Hanover, worked together with their project partners at BGR and the Leibniz University Hanover, Institute for Geotechnics, to develop the planning basis for the site selection and for the construction of storage caverns in flat layered salt and multiple or double saliniferous formations. Such caverns could store renewable energy in the form of hydrogen or compressed air. While the previous project InSpEE was limited to salt formations of great thickness in Northern Germany, salt horizons of different ages have now been examined all over Germany. To estimate the potential, depth contour maps of the top and the base as well as thickness maps of the respective stratigraphic units were developed. Due to the present INSPIRE geological data model, it was necessary, in contrast to the original dataset, to classify the boundary lines of the potential storage areas in the Zechstein base and thickness layers, whereby the classification of these lines was taken from the top Zechstein layer. Consequently, the boundary element Depth criterion 2000 m (Teufe-Kriterium 2000 m) corresponds on each level to the 2000 m depth of Top Zechstein. However, the boundary of national borders and the boundary of the data basis could not be implemented in the data model and are therefore not included in the dataset. Information on compressed air and hydrogen storage potential is given for the identified areas and for the individual federal states. According to the Data Specification on Geology (D2.8.II.4_v3.0) the content of InSpEE-DS (INSPIRE) is stored in 18 INSPIRE-compliant GML files: InSpEE_DS_GeologicUnit_Isopachs_Zechstein.gml contains the Zechstein isopachs. InSpEE_DS_GeologicUnit_Isobaths_Top_Zechstein.gml and InSpEE_DS_GeologicUnit_Isobaths_Basis_Zechstein.gml contain the isobaths of the top and basis of Zechstein. The three files InSpEE_DS_GeologicStructure_ThicknessMap_Zechstein, InSpEE_DS_GeologicStructure_Top_Zechstein and InSpEE_DS_GeologicStructure_Basis_Zechstein represent the faults of the Zechstein body as well as at the top and at the basis of the Zechstein body. InSpEE_DS_GeologicUnit_Boundary_element_Potential_areas_Zechstein.gml contains the boundary elments of the potential areas at the top and the basis of Zechstein as well as of the Zechstein body. The three files InSpEE_DS_GeologicUnit_Uncertainty_areas_ThicknessMap_Zechstein.gml, InSpEE_DS_GeologicUnit_Uncertainty_areas_Top_Zechstein.gml, InSpEE_DS_GeologicUnit_Uncertainty_areas_Basis_Zechstein.gml represent the uncertainty areas of the Zechstein body as well as at the top and at the basis of the Zechstein body. InSpEE_DS_GeologicUnit_Potentially_usable_storage_areas_Storage_potential_in_the_federal_states.gml comprises the areas with storage potential for renewable energy in the form of hydrogen and compressed air. The six files InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Malm.gml, InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Keuper.gml, InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Muschelkalk.gml, InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Roet.gml, InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Zechstein.gml and InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Rotliegend.gml represent the salt distribution of the respective stratigraphic unit. InSpEE_DS_GeologicUnit_General_salt_distribution.gml represents the general salt distribution in Germany. This geographic information is product of a BMWi-funded research project "InSpEE-DS" running from the year 2015 to 2019. The acronym stands for "Information system salt: planning basis, selection criteria and estimation of the potential for the construction of salt caverns for the storage of renewable energies (hydrogen and compressed air) - double saline and flat salt layers".

INSPIRE: Information system salt: planning basis, selection criteria and estimation of the potential for the construction of salt caverns for the storage of renewable energies (hydrogen and compressed air) - double saline and flat salt layers (InSpEE-DS)

Which salt formations are suitable for storing hydrogen or compressed air? In the InSpEE-DS research project, scientists developed requirements and criteria for the assessment of suitable sites even if their exploration is still at an early stage and there is little knowledge of the salinaries’ structures. Scientists at DEEP.KBB GmbH in Hanover, worked together with their project partners at BGR and the Leibniz University Hanover, Institute for Geotechnics, to develop the planning basis for the site selection and for the construction of storage caverns in flat layered salt and multiple or double saliniferous formations. Such caverns could store renewable energy in the form of hydrogen or compressed air. While the previous project InSpEE was limited to salt formations of great thickness in Northern Germany, salt horizons of different ages have now been examined all over Germany. To estimate the potential, depth contour maps of the top and the base as well as thickness maps of the respective stratigraphic units were developed. Due to the present INSPIRE geological data model, it was necessary, in contrast to the original dataset, to classify the boundary lines of the potential storage areas in the Zechstein base and thickness layers, whereby the classification of these lines was taken from the top Zechstein layer. Consequently, the boundary element Depth criterion 2000 m (Teufe-Kriterium 2000 m) corresponds on each level to the 2000 m depth of Top Zechstein. However, the boundary of national borders and the boundary of the data basis could not be implemented in the data model and are therefore not included in the dataset. Information on compressed air and hydrogen storage potential is given for the identified areas and for the individual federal states. According to the Data Specification on Geology (D2.8.II.4_v3.0) the content of InSpEE-DS (INSPIRE) is stored in 18 INSPIRE-compliant GML files: InSpEE_DS_GeologicUnit_Isopachs_Zechstein.gml contains the Zechstein isopachs. InSpEE_DS_GeologicUnit_Isobaths_Top_Zechstein.gml and InSpEE_DS_GeologicUnit_Isobaths_Basis_Zechstein.gml contain the isobaths of the top and basis of Zechstein. The three files InSpEE_DS_GeologicStructure_ThicknessMap_Zechstein, InSpEE_DS_GeologicStructure_Top_Zechstein and InSpEE_DS_GeologicStructure_Basis_Zechstein represent the faults of the Zechstein body as well as at the top and at the basis of the Zechstein body. InSpEE_DS_GeologicUnit_Boundary_element_Potential_areas_Zechstein.gml contains the boundary elments of the potential areas at the top and the basis of Zechstein as well as of the Zechstein body. The three files InSpEE_DS_GeologicUnit_Uncertainty_areas_ThicknessMap_Zechstein.gml, InSpEE_DS_GeologicUnit_Uncertainty_areas_Top_Zechstein.gml, InSpEE_DS_GeologicUnit_Uncertainty_areas_Basis_Zechstein.gml represent the uncertainty areas of the Zechstein body as well as at the top and at the basis of the Zechstein body. InSpEE_DS_GeologicUnit_Potentially_usable_storage_areas_Storage_potential_in_the_federal_states.gml comprises the areas with storage potential for renewable energy in the form of hydrogen and compressed air. The six files InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Malm.gml, InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Keuper.gml, InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Muschelkalk.gml, InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Roet.gml, InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Zechstein.gml and InSpEE_DS_GeologicUnit_Salt_distribution_in_Germany_Rotliegend.gml represent the salt distribution of the respective stratigraphic unit. InSpEE_DS_GeologicUnit_General_salt_distribution.gml represents the general salt distribution in Germany. This geographic information is product of a BMWi-funded research project "InSpEE-DS" running from the year 2015 to 2019. The acronym stands for "Information system salt: planning basis, selection criteria and estimation of the potential for the construction of salt caverns for the storage of renewable energies (hydrogen and compressed air) - double saline and flat salt layers".

1 2 3 4 5