Dieser WFS beschreibt Angebote, die Sie bei der Suche nach einem freiwilligen Engagement unterstützen. Zur genaueren Beschreibung der Daten und Datenverantwortung nutzen Sie bitte den Verweis zur Datensatzbeschreibung.
DWD’s fully automatic MOSMIX product optimizes and interprets the forecast calculations of the NWP models ICON (DWD) and IFS (ECMWF), combines these and calculates statistically optimized weather forecasts in terms of point forecasts (PFCs). Thus, statistically corrected, updated forecasts for the next ten days are calculated for about 5400 locations around the world. Most forecasting locations are spread over Germany and Europe. MOSMIX forecasts (PFCs) include nearly all common meteorological parameters measured by weather stations. For further information please refer to: [in German: https://www.dwd.de/DE/leistungen/met_verfahren_mosmix/met_verfahren_mosmix.html ] [in English: https://www.dwd.de/EN/ourservices/met_application_mosmix/met_application_mosmix.html ]
Die Internationale Karte der Eisenerz-Vorkommen in Europa 1 : 2 500 000 wurde 1977 fertig gestellt und von der BGR herausgegeben. Über 70 Geologen aus Europa, Nordafrika und dem Mittlerem Osten arbeiteten gemeinsam mit dem Redaktionsteam an der Kompilation der Karte und den Erläuterungen. Die Karte, die 42 Länder in 16 Kartenblättern abdeckt, zeigt mehr als 800 Eisenerz-Vorkommen. Alle bedeutenden Vorkommen (im Abbau oder stillgelegt) sind enthalten. Auch Vorkommen, die nur von genetischem oder historischem Interesse sind, wurden mit abgebildet. Detaillierte Informationen zur Internationalen Karte der Eisenerz-Vorkommen in Europa 1 : 2 500 000 - zu Struktur, Aufbau und Hintergrunddaten - sind in den Erläuterungen zur Karte zu finden.
The GRIND project (Geological Research through Integrated Neoproterozoic Drilling) aims to establish a comprehensive drill core archive of the Neoproterozoic Era through three phases: Tonian (GRIND-TON), Cryogenian (GRIND-CRY), and the Ediacaran–Cambrian Transition (GRIND-ECT). The GRIND-ECT phase, the first to be completed, investigates environmental change and biological turnover of the late Ediacaran leading to the Cambrian Explosion. GRIND-ECT drilling targeted mixed siliciclastic–carbonate successions in Namibia and Brazil, with drilling conducted during operational campaigns in 2019 and 2022. A total of eight fully cored boreholes were completed, recovering more than 2.6 km of HQ core with consistently high recovery. All cores were split, documented, and archived at the Federal Institute for Geosciences and Natural Resources (BGR) core shed in Berlin-Spandau, Germany This report documents the ICDP operational dataset produced during Expedition 5064 and provides guidance on its structure, content, and use. The dataset comprises metadata, tabular data, and extensive image collections exported from the ICDP mobile Drilling Information System (mDIS), including site, hole, core, section, sample, lithology, and drilling records. All data are linked through ICDP combined identifiers and International Generic Sample Numbers (IGSNs), providing a robust and FAIR-compliant foundation for ongoing and future studies of the Ediacaran–Cambrian transition.
Dieser WMS beschreibt Angebote, die Sie bei der Suche nach einem freiwilligen Engagement unterstützen. Zur genaueren Beschreibung der Daten und Datenverantwortung nutzen Sie bitte den Verweis zur Datensatzbeschreibung.
Hier finden Sie Angebote, die Sie bei der Suche nach einem freiwilligen Engagement unterstützen. Freiwilligenagenturen sind Angebote zur Förderung des freiwilligen Engagements. Sie bieten kostenlose Information und Beratung von Interessierten, Engagierten und Organisationen des freiwilligen Engagements. Als Vernetzungs- und Beratungsstellen unterstützen sie lokale Akteure zu festen Sprechzeiten, auf Anfrage und auch aufsuchend vor Ort. Mehrgenerationenhäuser sind Treffpunkte für Jung und Alt im Stadtteil. Sie bieten einen offenen Tagestreff mit Café oder Bistro sowie Kurs- und Dienstleistungen für Kinder und Jugendliche, Erwachsene, Familien und Seniorinnen und Senioren. Bei ihren Angeboten beziehen die Einrichtungen die Fähigkeiten aller Altersgruppen im Rahmen des freiwilligen Engagements ein.
The dataset was used to explore the spatial distribution of fluvial deposits in the area of the Ahr valley floor southwest of Mayschoß. The objective of this investigation was to extrapolate the findings of a chronological classification of an embedded floodplain cross-section, thereby underscoring the significance of fluvial geomorphological records in reconstructing past high-magnitude flood events. In detail, we used geophysical prospection methods (Electromagnetic Induction and Electrical Resistivity Tomography) to map the distribution and thickness of floodplain sediments as both methods provide proxy information on grain size distribution. Electromagnetic induction (EMI) was measured with a CMD-Mini Explorer and a CMD Explorer (both GF Instruments s.r.o., Brno, Czech Republic) in June 2022. We used the vertical dipole (VDP) at coil spacings of 0.32 m (VDP1, CMD Mini Explorer), 0.71 m (VDP2, CMD Mini Explorer), 1.18 m (VDP3, CMD Mini Explorer), 1.48 m (VDP4, CMD Explorer), 2.82 m (VDP5, CMD Explorer) and 4.49 m (VDP6, CMD Explorer). With the existing coil spacings, effective penetration depths of 0.5 m (VDP1), 1.0 m (VDP2) and 1.8 m (VDP3) for the CMD Mini Explorer and 2.2 m (VDP4), 4.2 m (VDP5) and 6.7 m (VDP6) for the CMD Explorer could be achieved. According to the manufacturer, 70 % of the signal originate from above these depths. The EMI sensors measured the apparent electrical conductivity (ECa, in mS/m). Measurements were taken by carrying the instrument about 0.2 m (CMD Mini Explorer) respectively 0.9 m (CMD Explorer) above the ground while being directly connected to Differential -GPS (Leica GPS1200) for positioning. The acquisition rate was five measurements per second. Data quality was checked by measuring a reference line before and after each measurement. The maximum offset of the EMI values between the two time points was 1.2 mS/m. A correction of the data was not necessary. We removed the reference lines and single outliers. In addition, two interference areas were removed from all EMI data sets. (1) a L-shapped area, running from north to the center and then to east, in which an underground power cable runs. (2) an area on the north-eastern part of the measurement area. Information on the location and extent of the removed interference areas can be found in the enclosed explanation of the EMI measurements. The Electrical Resistivity Tomography (ERT) data were acquired by using a PC controlled DC resistivity meter system (RESECS, GeoServe, Kiel, Germany) in October 2022. We measured a total of four transects with an electrode spacing 1 m. Transect 1 has a total length of 255 m, transect 2 a total length of 207 m, transect 3 a total length of 136 m and transect 4 a total length of 158 m. For all transects we applied a Wenner alpha and Dipole-Dipole configuration. The coordinates and the height of the electrodes were measured with a Differential-GPS (Leica GPS1200). Further information on the measurement setup and data structure can be found in the explanation of the specific ERT transects.
Bebauungspläne und Umringe der Gemeinde Losheim (Saarland):Bebauungsplan "06 09 00 Ergaenzungssatzung Elt" der Gemeinde Losheim, Ortsteil Mitlosheim
Kartenanwendung der Vermessungsverwaltung Rheinland-Pfalz zur Darstellung von historischen Topographischen Karten. Neben den Topographischen Karten 1:25.000 (1890 - 2019), gibt es auch die Möglichkeit die Tranchot/Müffling Karten (1820), die Karten der preussischen Landesaufnahme (1878), sowie die Positionsblätter in der Pfalz (1841) zu betrachten. Die Entwicklung der historischen Topographischen Karten lässt sich auch in Form einer Animation abspielen.
Ziel: Realisierung einer katastrophenfreien Kerntechnik. Fragestellungen: Lassen sich selbsttaetig wirkende stabilisierende Eigenschaften entdecken, entwickeln und anwenden, die bei Abweichungen von Normalbetriebsbedingungen eine Verminderung der Gefaehrdung bewirken ? Lassen sich selbsttaetig-wirkende, stabilisierende Eigenschaften identifizieren, ausschliessen bzw verbieten. Lassen sich um Zusammenwirken mehrerer solcher Eigenschaften Stabilitaetsgebiete etablieren. Haben solche stabilisierenden Eigenschaften eine abmildernde Wirkung fuer Einfluesse von aussen. Zwischenergebnisse wurden bisher mit dem Nachweis-Experiment SANA (SANA= Selbsttaetige Abfuhr der Nachwaerme) erbracht: Die Bedingungen fuer die selbsttaetige Abfuhr der Nachwaerme aus einem Kernreaktor wurden experimentell erarbeitet und zugehoerige Computer-Codes damit validiert.
| Organisation | Count |
|---|---|
| Bund | 63 |
| Europa | 1 |
| Kommune | 6 |
| Land | 23 |
| Wissenschaft | 28 |
| Zivilgesellschaft | 2 |
| Type | Count |
|---|---|
| Daten und Messstellen | 7 |
| Förderprogramm | 49 |
| Taxon | 2 |
| unbekannt | 25 |
| License | Count |
|---|---|
| Geschlossen | 6 |
| Offen | 60 |
| Unbekannt | 15 |
| Language | Count |
|---|---|
| Deutsch | 37 |
| Englisch | 52 |
| Resource type | Count |
|---|---|
| Archiv | 8 |
| Bild | 4 |
| Datei | 13 |
| Dokument | 2 |
| Keine | 43 |
| Webseite | 24 |
| Topic | Count |
|---|---|
| Boden | 52 |
| Lebewesen und Lebensräume | 74 |
| Luft | 38 |
| Mensch und Umwelt | 77 |
| Wasser | 42 |
| Weitere | 81 |