API src

Found 15 results.

Related terms

Kationen - Anionen RedOx Aktivmaterialien für Feststoffbatterien, KAROFEST - Kationen - Anionen RedOx Aktivmaterialien für Feststoffbatterien

Kationen - Anionen RedOx Aktivmaterialien für Feststoffbatterien

Hydrochemichal analysis thermal water Bad Blumau, Austria

The main objective of the work package 2 of the REFLECT project is to characterise relevant fluid properties and their reactions for saline fluids (type C). One of the specific goals was to collect fluid samples from several saline fluids from geothermal sites across Europe, determine their properties, and thus contribute to the Fluid Atlas (WP3). Additionally, the REFLECT team will compare those field data with data from lab experiments performed at near natural conditions. Samples of type C fluids were taken from several sites in Germany, Austria, Belgium and the Netherlands. The samples were analysed for major and minor ions, dissolved gases and isotopes. At the geothermal site Blumau in Austria five thermal water samples were taken by Hydroisotop at the production and injection well, as well as after the heat exchanger on 29th of June 2020. Besides the hydrochemical composition, dissolved gases, the heavy metal content, DOC and stable isotopes (18O, 2H, 13C-DIC) were analysed. Additionally, three thermal water samples were taken by the operator on 09th of March 2021 and sent to Hydroisotop for DOC measurements. The dataset contains analysis results associated with the research project reflect. It is a comma separated file (csv) containing the following columns: Location,Country,Description,Laboratory,Lab No.,Sampling date,Temperature at sampling (degC),Spec. electr. conductivity (25 degC) at sampling,Spec. electr. conductivity (25 degC) Lab. (muS/cm),pH value at sampling,pH value Lab.,Temperature Lab. (degC),Dissolved oxygen content (mg/l),Redox potential (mV),Alkalinity (pH 4.3) Lab. (mmol/l),Sodium (mg/l),Potassium (mg/l),Calcium (mg/l),Magnesium (mg/l),Ammonium (mg/l),Hydrogen carbonate (mg/l),Chloride (mg/l),Sulphate (mg/l),Nitrate (mg/l),Nitrite (mg/l),Antimony (mg/l),Barium (mg/l),Boron (mg/l),Bromide (mg/l),Fluoride (mg/l),Iodide (mg/l),Molybdenum (mg/l),Ortho-phosphate (mg/l),Selenium (mg/l),Strontium (mg/l),Sulphide total (mg/l),Aluminium (mg/l),Arsenic (mg/l),Lead (mg/l),Cadmium (mg/l),Chromium total (mg/l),Cobalt (mg/l),Iron total (mg/l),Copper (mg/l),Nickel (mg/l),Mercury (mg/l),Zinc (mg/l),Tin (mg/l),DOC (mg/l),Hydrogen (Nml/kg),Oxygen (Nml/kg),Nitrogen (Nml/kg),Carbon dioxide (Nml/kg),Methane (Nml/kg),Ethane (Nml/kg),Propane (Nml/kg),Butane (Nml/kg),Pentane (Nml/kg),Ethene (Nml/kg),Propene (Nml/kg),Helium (Nml/kg),Argon (Nml/kg),Sum Gases (Nml/kg),Oxygen-18 d18O-H2O (per mille VSMOW),Deuterium d2H-H2O (per mille VSMOW),Deuterium-excess (per mille VSMOW),Carbon-13 d13C-DIC (per mille VPDB) Methods are described in the accompanying deliverable Fluid data of geothermal sites (type C).

Hydrochemical analysis thermal water Insheim, Germany

The main objective of the work package 2 of the REFLECT project is to characterise relevant fluid properties and their reactions for saline fluids (type C). One of the specific goals was to collect fluid samples from several saline fluids from geothermal sites across Europe, determine their properties, and thus contribute to the Fluid Atlas (WP3). Additionally, the REFLECT team will compare those field data with data from lab experiments performed at near natural conditions. Samples of type C fluids were taken from several sites in Germany, Austria, Belgium and the Netherlands. The samples were analysed for major and minor ions, dissolved gases and isotopes. Two thermal water samples were taken by Hydroisotop at the production and injection wells in Insheim on 18th of June 2020. The samples were analysed for their hydrochemical composition, heavy metal and dissolved organic carbon (DOC) content, dissolved gases and stable isotopes of water and gas components (18O, 2H, 34S-H2S, 34S-SO4, 18O-SO4, 13C-DIC, 13C-CO2, 13C-CH4, 2H-CH4). Nitrate and a positive redox potential is present in both water samples when reducing conditions would be expected in a deep geothermal well. On-site measurements showed no oxygen present. It is however possible that air contamination during sampling caused some ammonium to oxidize to nitrate. The dataset contains analysis results associated with the research project REFLECT. It is a comma separated file (csv) containing the following columns: Location,Country,Description,Laboratory (Lab.),Lab. No.,Sampling date,Temperature at sampling (degC),Spec. electr. conductivity (25 degC) at sampling (muS/cm),Spec. electr. conductivity (25 degC) Lab. (muS/cm),pH value at sampling,pH value Lab.,Dissolved oxygen content (mg/l),Redox potential (mV),Base capacity (pH 8.2) (mmol/l),Alkalinity (pH 4.3) on site (mmol/l),Alkalinity (pH 4.3) Lab. (mmol/l),Sodium (mg/l),Potassium (mg/l),Calcium (mg/l),Magnesium (mg/l),Ammonium (mg/l),Hydrogen carbonate (mg/l),Chloride (mg/l),Sulphate (mg/l),Nitrate (mg/l),Antimony (mg/l),Barium (mg/l),Bromide (mg/l),Fluoride (mg/l),Iodide (mg/l),Lithium (mg/l),Molybdenum (mg/l),Total phosphate (mg/l),Ortho-phosphate (mg/l),Silicon (mg/l),Strontium (mg/l),Sulphide total (mg/l),Aluminium (mg/l),Arsenic (mg/l),Lead (mg/l),Iron total (mg/l),Copper (mg/l),Manganese total (mg/l),Nickel (mg/l),Uranium (mg/l),Zinc (mg/l),DOC (mg/l),Hydrogen (Nml/kg),Oxygen (Nml/kg),Nitrogen (Nml/kg),Carbon dioxide (Nml/kg),Methane (Nml/kg),Ethane (Nml/kg),Propane (Nml/kg),Butane (Nml/kg),Pentane (Nml/kg),Helium (Nml/kg),Argon (Nml/kg),Sum Gases (Nml/kg),Oxygen-18 d18O-H2O (per mille VSMOW),Deuterium d2H-H2O (per mille VSMOW),Deuterium-excess (per mille VSMOW),Carbon-13 d13C-DIC (per mille VPDB),Sulphur-34 d34S-SO4 (per mille V-CDT),Sulphur-34 d34S-H2S (per mille V-CDT),Oxygen-18 d18O-SO4 (per mille VSMOW),Carbon-13 d13C-CO2 (per mille VPDB),Carbon-13 d13C-CH4 (per mille VPDB),Deuterium d2H-CH4 (per mille VPDB). Methods are described in the accompanying deliverable Fluid data of geothermal sites (type C)

Copper isotope fractionation during prehistoric smelting of copper sulfides: experimental and analytical data

The project from which the data derived aimed to establish the first systematic study of Cu isotope fractionation during the prehistoric smelting and refining process. For this reason, an experimental approach was used to smelt sulfide copper ore according to reconstructed prehistoric smelting models. The ore was collected by E. Hanning as part of her PhD thesis work from a Bronze Age mining site, the Mitterberg region, Austria (Hanning and Pils 2011) and was made available for the experiments.All starting materials for the experiments such as the natural ore, roasted ore, construction clay, flux, dung (used for the roasting), wood and charcoal (fuel) were natural materials. All firing conditions including the amount of fuel or charging material and the temperatures in the furnaces were recorded, and the experimental procedures were documented in the very detail. In total, 30 experiments were carried out in 4 experimental series. The smelting products, both intermediate products and final products were sampled during or after the respective experiment. Slag, matte and copper metal were the major smelting products. All other materials used in and produced by the experiments were sampled, too. Materials used and produced in the two most promising experimental series with regard to potential Cu isotope fractionation were analyzed. Based on the analytical results, the potential of Cu isotopes as a tool in archaeometallurgical research was systematically evaluated and consequences for the copper isotope application as a provenance tool in archaeometry were identified.The data include the documentation of the experiments, laboratory procedures and analytical methods. An experimental outline was previously published in Rose et al. (2019). Analytical methods applied were ICP-MS (elemental analysis, 80 samples), MC-ICP-MS (copper isotopes, 98 samples), and XRD (phase analysis, 25 samples). The experiments were carried out at the Römisch-Germanisches Zentralmuseum, Labor für Experimentelle Archäologie, Mayen, Germany. Laboratories used for the analytical part of the project were the research laboratories at the Deutsches Bergbau-Museum Bochum and FIERCE (Frankfurt Isotope and Element Research Center), Goethe-University Frankfurt, both Germany. Data were processed and plots created with R (R Core Team 2019) in RStudio®. Data are provided as data tables or text files, the R scripts used to create the time-temperature plots of the smelting experiments are also included.The full description of the data and methods is provided in the data description file.

FELIZIA - Festelektrolyte als Enabler für Lithium-Zellen in automobilen Anwendungen^FELIZIA - Festelektrolyte als Enabler für Lithium-Zellen in automobilen Anwendungen, FELIZIA - Festelektrolyte als Enabler für Lithium-Zellen in automobilen Anwendungen

1. Vorhabenziel Das Teilvorhaben der AG Adelhelm (FSU Jena) beschäftigt sich mit der Herstellung und Charakterisierung von Kathodenmaterialien für Festkörperbatterien basierend auf Kupfersulfiden als Aktivmaterial. Kombiniert mit einer Lithiumanode weisen Vollzellen mit 552 Wh/kg (Cu2S) bzw. 960 Wh/kg (CuS) sehr hohe theoretische Energiedichten auf. Kupfersulfide weisen sehr hohe intrinsische Leitfähigkeiten auf, was sie besonders hinsichtlich ihres Einsatzes in Feststoffbatterien als Forschungsobjekt interessant macht. 2. Arbeitsplan Kernpunkte des Arbeitsplans sind (1) die Herstellung von kupfersulfidbasierten Kathoden mit optimierter elektrochemischer Aktivität, (2) die strukturelle und elektrochemische Untersuchungen der Kathodenreaktion zur Aufklärung des Speichermechanismus und zur Identifizierung von Alterungseffekten, (3) die Präparation von Festkörperbatterien mit geeignetem Festelektrolyt und Lithium oder Lithiumlegierung als Anode und deren elektrochemische Charakterisierung.

Synthese von nicht-toxischen Cu2ZnSnS4 Nanopartikeln (CZTS NP) für die Anwendung in optoelektronischen Bauelementen

Das Ziel dieses Forschungvorhabens ist die Entwicklung einer Synthesemethode zur Herstellung von Cu2ZnSnS4 Nanopartikeln (kurz CZTS NPs) und das Verständnis ihres Bildungsmechanismus. Die Synthesemethoden reichen hierbei von der klassischen Heißinjektion über Solvothermal-Synthese bis hin zu Mikrowellen unterstützten Reaktionen. Die synthetisierten Partikeln werden hinsichtlich ihrer Kristallinität (XRD; Raman) und ihrer optischen Eigenschaften (UV-Vis, Photolumineszenz) charakterisiert. Ziel ist es dabei die gebildete kristalline Phase und die Gegenwart von Sekundärphasen wie Kupfer-, Zink- und Zinn-Sulfide oder Kupfer-Zink-Sulfide zu ermittelten. Die charakterisierten Partikeln werden abschließend als dünne Schichten abgeschieden, unter kontrollierten Bedingungen ausgeglüht und in Funktionsbauteilen, wie Dünnschichtsolarzellen, getestet. Hierbei erfolgt eine enge Zusammenarbeit mit Projektpartnern.

NADNuM, Passivierung und Einbau von Nanopartikeln in Siliziummatrix für Solarzellen

Synthese und Prozessierung von nanoskaligen Absorbermaterialien^NADNuM^Passivierung und Einbau von Nanopartikeln in Siliziummatrix für Solarzellen, Charakterisierung und Passivierung von Defektzuständen in Nanopartikeln

NADNuM^Passivierung und Einbau von Nanopartikeln in Siliziummatrix für Solarzellen, Synthese und Prozessierung von nanoskaligen Absorbermaterialien

1 2